How To Put A Tire Back On The Rim: A Step By Step Simple - Tireer

This step is the first step in all your processes. What you need to do is make sure they are smooth. You need to raise your wheel part off the ground, which will make it easier for you to disassemble with the help of a lifting tool.

At the same time, you should only re-install the wheel in the vehicle when you have fixed the problems encountered. Errors that you need to improve after removing them. Make sure you've selected it all and don't have any doubts.

There are a number of causes leading to tire removal such as cracked or blown tires, punctured tires due to obstacles while moving. After the repair, you need to put the rim on the tire. Moreover, your car will be safe with a perfect wheel.

Step 2: Spray the starter fluid around the bead of the tire

At this 2nd step, you will get a bottle of Fluid. They are often used as a support tool when you have difficulty starting the engine or cold. They will do the job perfectly under normal conditions.

Then, you use the spray in a circular direction around your wheel. In this next operation, carefully spray the liquid into the space between the sidewall tire and the rim. However, you should also ensure you're not taking too much of it.

The reason for adequate fluid is that too much of them can cause sidewall problems and even lead to failure, damage, and replacement.

At the same time, you should also spray on each ground in one line just below the edge. The effect of this activity is to help limit fires while you use matches/lighters and Starter Fluid.

Moreover, when using the above liquid, you need to be extremely careful when spraying on the wheels. Due to their flammability and flammability that can cause a fire, it isn't easy even to end it.

Therefore, you need to equip yourself with a fire extinguisher and the skills to manipulate them before assembling.

Step 3: Use fire

The third step in the process needs to be as soon as finishing step 2. This action will prevent the tire's granules from drying out and the solution from evaporating.

Then you start lighting it using matches, lighters, or other sources of fire. You light up the fluid associated with the components above from the ground. At the same time, it will help keep you safer in potentially explosive conditions.

But don’t worry your goal is to just light it up and then turn it off as soon as you can and that smoke is going to fill the tire, so you can do it a couple of times.

In addition, fire causes the air to expand rapidly, at the same time, the particles will move along the wheel and return to their original position.

After the tire bead is exposed to fire and when you hear the sound within 2 seconds. At this point, you need to put out the fire immediately. The faster you act, the sooner the fire is extinguished.

Moreover, the fire extinguisher at this time will also come into play.

Step 4: Pump air into the tire

When you hear the popping sound, it is time to end with the tire in place on the rim.

You need to use an inflator and pump outside air into your tires.

When the tire inflates, you can start or continue your journey on the vehicle that has changed the tire.

This method is standard when replacing a wheel on a rim, especially when you don't need a repair shop.

If you can't replace them yourself and are close to a store, you should take them out there. The staff will support and replace you. Then the safety will be more assured.

Side effects might happen