How To Re-season A Blackstone In 75 Easy Steps!

Maybe your like

Jump to How-To

Okay. It isn't actually 75 steps, but it will feel like it if you don't have the right tools and tricks up your sleeve!

Sometimes, your griddle might get a little neglected. Griddles are powerful cooking tools, but since they are metal and used outside they can take some care and upkeep to keep from deteriorating.

How To Season Your Gas Griddle

I know. YOUR Blackstone would never get this rusty/dirty/neglected.

But mine did, and I avoided the re-seasoning process like the plague because I was afraid it was going to be super difficult and/or frustrating.

I'm in a bunch of the Blackstone Facebook Groups, and one thing they all have in common is people complaining about and having trouble seasoning the surface correctly.

My Blackstone got neglected for a while because it was on the front porch at our old house, and there just wasn't much room to maneuver over there.

We also had a few misadventures in seasoning and the first few times we fired up the flat top were uhhhh. Well, they were less than successful, to say the least.

Then we moved, and while we have an awesome space for all of our outdoor cooking tools now, my poor Blackstone looked like this.

Not good.

It didn't look any better under the pile of junk either.

So it was time to clear my calendar and get to work.

More Blackstone Recipes here!

How To Re-Season A Rusty Griddle

The short version is down at the bottom of the post, but I wanted to expand on some of the key points here.

The biggest lesson in this is that there is no ONE right way to do this.

The goal of a re-season is to get rid of all the rust and junk on top of the metal. The paths to get there are many and varied, so feel free to ad lib a bit and use what you've got around if you don't want to Amazon Prime the tools I used.

Step 1: Scrape

Grab your handy bench scraper and all of the excess stores of elbow grease you have available, and get scraping.

I used just a bench scraper for this task and it worked fine, but I'm definitely investing in this scraper below for future upkeep. The handle will give you much-needed leverage.

You're going to really have to put some work into this part, and you'll scrape for longer than you thought possible.

Step 2: Apply Heat

Now it is time to fire up the griddle and let it get good and hot. Heating it will help loosen any additional debris that wasn't being cooperative during your first go-round.

Let it get HOT and let it stay HOT for about 15 minutes. Then get your heat-proof gloves on and keep scraping.

Step 3: Reduce the heat

Turn the heat down to medium / medium-low and rub down with some oil and steel wool

Confession time! I didn't have any steel wool, and MAN was I wishing for some. Be smarter than I was, and get some before you tackle this. Just DON'T get the ones with the cleaner in them. No cleaner, no way.

If you just have a grill brick though, break that out here. It'll do!

Also, I hope you didn't put away those heat-proof gloves because you're going to need them here too.

Rub some flaxseed oil onto the griddle and using the steel wool, get to scrubbing. You're trying to loosen up additional gunk and leave behind that clean metal surface.

Step 4: More Scraping

I know! You are probably sick of all of the scraping and also really glad you have a nice bench scraper. But still, scrape all of the stuff off that the steel wool + oil just loosened up.

You're giving your griddle a little exfoliating treatment. Embrace the inner beautician in you.

Once you scrap it, it's going to look ugly again. That's okay. Just go with it.

Eventually, after the scrubbing and scraping, you'll start to see some actual METAL!

Step 5: Wipe Down

Paper towels are your new BFF. Don't be stingy.

After you scrape up as much of the stuff as you can, a little more oil and some paper towels are in order. We're trying to clean away as much as the dirt and grime and stuff that leaves things on paper towels.

So, keep oiling and wiping and scraping and wiping and just buy some stock in Bounty already because you own a griddle now and paper towels are a part of the deal.

This is just a SMALL amount of the towels that I used.

Step 6: Grill Stone

It is finally time to break out the grill stone (if you were smart and had steel wool before).

The grill stone is like a big pumice stone, so it need some oil to glide over the griddle and it is going to leave some stuff behind. That's okay. We want that because it is polishing the griddle and continuing to take away layers of the crud that's built up while you were busy doing things other than taking care of your griddle.

Step 7: Just Keep Swimming

AKA - you might need a few more go-rounds with the steel wool and/or grill stone. Just keep on going until it is looking better.

Some signs you might be done?

Nothing else is scraping off
Your paper towels are starting to come away clean
You ran out of your beverage
You are considering throwing your griddle off of the nearest cliff

Step 8: Turn Up The Heat Again

Heat is your friend now along with the paper towels. Crank it up and make sure your gloves are still on.

Step 9: Rub With Oil

The biggest mistake people make when seasoning their griddle, which is what we're doing now, in case you didn't realize, is that they put on WAY too much oil.

For this, you want a THIN even layer of oil. Use paper towels and use the oil sparingly.

Once the oil is on, let the griddle stay on high heat. The oil will eventually start to smoke. That's a good thing. It is adhering to the griddle and that's what you want.

It is also starting to look better.

Step 10: Turn Off The Griddle And Let Cool

This is a hurry-up-and-wait kind of situation now. Rest your weary arms, grab another cocktail, and let that griddle cool completely.

Step 11: Repeat The Oil/High Heat/Smoke Fest 3 More Times

And cool completely between each.

This is a really important part of the process, so don't quit now! Do those 3 more layers of oil that you're baking onto the surface of the metal. You can DOOOOO it!

And look what you'll end up with!

Pat yourself on the back! You now have a seasoned griddle!

Mine still has some work left on it to really get it properly seasoned, but the change is pretty incredible!

Pin For Later

Continue to Content Prep Time: 10 minutes Active Time: 2 hours Additional Time: 4 hours Total Time: 6 hours 10 minutes

If your grill gets rusty, don't throw in the towel! A little elbow grease and a few tools will have your griddle cooking again in no time!

Materials

Flaxseed oil
Paper towels

Tools

Metal scraper
Grill stone
Heat-resistant gloves
Steel wool (optional)

Instructions

Scrape all of the debris that you can off of the surface with your steel bench scraper.
Turn on the griddle and heat over high heat for 15-20 minutes. Turn the heat down to medium to medium-low, put on the heat-proof gloves, and continue scraping until all of the rust and debris is gone.
Drizzle a couple of tablespoons of oil onto the grill, and hit it with the steel wool pads to continue removing discoloration and rust that couldn't be scraped off. If you don't have steel wool and went with just grill bricks, you can use that here.
Use the bench scraper and scrape off as much of the gunk that's left there as you can.
Wipe the griddle clean with the paper towels. You're going to be using a lot of them. Don't be shy.
Next, some more oil to the griddle and hit it hard with your grill stone. This is going to continue removing layers of junk off of the surface of the griddle. The idea is for the paper towels to eventually wipe away clean and have the surface be clean as well.
Repeat with the steel wool and grill stone and scraper routine until nothing else will come up.
Once the paper towels wipe away clean, turn the griddle back on to high heat.
While the griddle is heating, pour some more oil on the surface and carefully smooth it around evenly on the griddle. You want only a VERY thin layer.
Let the griddle heat over high heat for 15-20 minutes, or until the smoking stops.
Turn the griddle off and let it cool completely.
Once it is cool, place another layer of oil on, crank up the heat to high, and repeat the smoke-off/cool down/re-oil process until you've been through it 4 times.
Pat yourself on the back! You now have a seasoned griddle!