How To Release A Stuck Parking Brake - It Still Runs

Maybe your like

How to Release a Stuck Parking Brake by Maxfield Carroll itstillruns article image

Car Brake image by Joelyn Pullano from Fotolia.com

In many vehicles, the parking brake can get stuck if left engaged for a long period of time, or if subjected to overzealous application. If you feel the unmistakable drag of a seized parking brake when you're in your vehicle, try to determine the location and cause of the jam. There may be rust or corrosion, and problems can occur in the cable, the lever or the brake assembly.

Step 1

Agitate the brakes physically by applying and releasing the brake a number of times. Or shift alternately into drive and reverse to lurch the vehicle back and forth. Or bounce the car up and down near the seized wheel.

Step 2

Support the car securely on a jackstand. Remove the wheel to gain access to the seized brake. Take care not to damage any parts as you tap the brake assembly with a hammer to free the pads from the disc or drum.

Step 3

Test the parking brake cable to see if it is broken or stuck. Release the cable from the rear passenger side brake caliper and try to free up the cable movement with a penetrating rust remover, or if necessary, replace the cable.

Step 4

Maneuver two screwdrivers through the access port on the drum brake backing plate to loosen the tension adjuster screw. Remove the drum and replace the brake cable, brake shoes and return spring, as necessary. Refer to your vehicle service manual to find the detailed procedures for your specific model. Reassemble the brakes, lower the jack, and test the brakes.

References

If It Jams, Fix It: Stuck Parking Brake

Things You'll Need

Jack
Hammer
Penetrating rust remover
Screwdrivers
Wrenches

Writer Bio

Maxfield Carroll is a writer and artist whose work has appeared on various websites and in newspapers. He holds a Bachelor of Arts in communications and journalism.