How To Remove 5 Gallon Bucket Lids - HomeSteady

×

Video Hub

Cleaning

Interior

HVAC

Electrical

DIY

Exterior

Maintenance

Paint

Laundry

Home - Diy How to Remove 5 Gallon Bucket Lids By Dawn Rivera Updated July 21, 2017

Opening a 5 gallon bucket lid for the first time is a frustrating experience, but the right tools can make the job easy. The force needed to remove the lid varies depending on your choice of tools. Some require a bit more strength to manage the task, but overall it’s a quick job.

Things You Will Need

+

• Paint bucket opener
• Large flat screwdriver
• Pliers
• Utility knife

Opening a 5 gallon bucket lid for the first time is a frustrating experience, but the right tools can make the job easy. The force needed to remove the lid varies depending on your choice of tools. Some require a bit more strength to manage the task, but overall it’s a quick job. Things like cake icing and dill pickles also come in 5 gallon buckets, but most of us will only be dealing with paint or household maintenance items.

Removing the Lid

1. Place the bucket on a stable protected surface before you open it. A full 5 gallon pail weighs about 50 pounds and jockeying it into position is easier if the container is closed. Place the 5 gallon pail close to where you will need to use it for easy access.



2. Use a paint bucket opener, if possible. It is a hard plastic tool shaped like a “C” with a handle available at paint and hardware stores. Hook the top part of the “C” over the top edge and the lower part of the "C" under the rim of the lid.



3. Pry upward with the handle at intervals around the lid. If the can has flanges, or tabs with a slit between them, pry at the center of a tab. Work around the lid a couple of times, if necessary, to loosen it completely. When the lid is loosened, gently pry it up and grasp the edge to remove it.



4. If a bucket opener is not available, use a screwdriver and pliers. It is easier to pry up the flanges if they are first cut apart at the slit. Carefully cut downward using the utility knife.



5. Place the screwdriver under flanges or lid rim and pry up gently. Use pliers to pull the flanges up further. Work around the bucket until the lid is loose enough to be removed with pliers or fingers. Try not to damage the edge of the bucket with the screwdriver. Levering too hard can break down the bucket edge making it difficult to replace the lid.



6. Keep the lid clean and available for closing the bucket. When replacing it, use a cloth over the top to catch paint squirts and gently tap around the rim with a mallet or hammer. Wipe off wet paint drips.

Writer Bio

Based in central Florida, Dawn Rivera began writing professionally in the 1970s. She served as a contributing columnist for the “Sanford Herald” newspaper and was the editor of “PCO,” a magazine for the Florida pest control industry. Rivera holds a Bachelor of Science in business administration from Florida Southern College.

Photo Credits

• Pamela Follett/Demand Media
• Pamela Follett/Demand Media
• Pamela Follett/Demand Media
• Pamela Follett/Demand Media
• Pamela Follett/Demand Media
• Pamela Follett/Demand Media
• Pamela Follett/Demand Media
• Pamela Follett/Demand Media

More Articles

• How to Remove Door Handles on a Whirlpool Refrigerator
• How to Troubleshoot a Frigidaire Dehumidifier Not Continuously Draining
• Tips on Easily Removing the Pins From Door Hinges
• How to Use the Can Opener on a Multitool
• How to Make a 5-Gallon Bucket Seat
• How to Take Rolls off Paint Rollers

People are reading

1. How to Open a Rusted Jar
2. How to Make a Spin Dryer
3. How to Open a Sani-Fresh Soap Dispenser

You may also like

1. How to Clean a Plastic Bucket
2. How to Open a 2 Gallon Bucket Lid
3. How to Tape & Paint in the Tight Spaces Above Kitchen Cabinets

Copyright © 2025 TechnologyAdvice, All Rights Reserved.

• About Us
• Advertise
• Contact Us
• Careers
• Terms of Use
• Privacy Policy
• CA Do Not Sell My Personal Information