How To Replace Electrical Outlets Using QuickWire (Push-In ...
Maybe your like
What is New? 
Recipes Travel Tips/Tricks Index 
When I made over the baby’s nursery I painted the area on the wall below the chair rail white. Therefore the ratty old off white outlets looked horrible. 
Back when I was actually finishing the room what I decided to do was just replace out the switch plate covers and then hide the outlets behind the furniture. (#KeepingItRealwithKimSix) but today I finally got off my horse and decided to suck it up and replace the outlets themselves. I have to admit they were REALLY bad.. I am pretty sure drunken monkies painted the room or something since they had about 4 layers of paint on them. 
Now there are 10,000 tutorials out there on how to replace your electrical outlets. My personal favorite is from my favorite DIY-guru Brittany. (In fact, I suggest you read HER post and THIS post because knowing more is always better.) Now, the thing about almost all those tutorials (including Pretty Handy Girl’s) is that they tell you how to use the traditional side screws for hooking up your new outlets. And that is a perfectly reasonable way of doing it, but I am too lazy for that. So today I’m showing you the shortcut using the push-in holes (also known as “QuickWire” connectors.) **Before undertaking this tutorial I am giving you a HUGE warning. If you are not comfortable working with electricity, or if you are AT ALL unsure of what you are going, please call a professional. Seriously.. I don’t want you to zap yourself to save $50. If the wiring looks strange or if you aren’t sure if something is right, don’t assume it will be okay if you just guess. I’m not responsible if you burn your house down! Also, be sure to check your local building code. In some jurisdictions, this type of electrical work may require a permit.** 
I always stick the voltage tester in the outlet (to make sure it is working) then go and turn off the power and check it again. You can also use a lamp or radio or whatever. 
If you successfully remove the wires you can probably use them ‘as is’ without stripping any additional insulation off. If you can’t get them out, you can cut them off with a wire cutter and then strip them yourself. To know just how much insulation you should take off, use the strip gage on the back of the outlet. T 
Now here is where you save a bunch of time. Instead of screwing them to the side you can poke the exposed wires into the small holes on the back of the outlet. It is as simple as that. That is why it is called “QuickWire." There is a little clip inside the outlet that will catch the wire and won’t let it pull back out. 
This is another place where the strip gage comes in handy. If you have stripped the connect length of wire, you will know you have the wire pushed in far enough when hardly any exposed wire is showing. Once you have the hot and neutral wires inserted, you need to add the ground. Create a ‘hook’ shape in the wire and wrap it CLOCKWISE around the (typically green) screw. You want it to go clockwise so when you tighten the screw you are also tightening the loop of the wire. 
You don’t need to use them on interior walls. 
Now that I’ve finished and see how good they look I want to replace the rest of the off white outlets and switches! The total cost for this project was under $6 (I had to replace 5 outlets and they are about $1 each!)
- Appetizers/Snacks
- Drinks
- Poultry
- Pork
- Beef
- Soups/Stews
- Slow Cooker
- Breads
- Vegetables/Sides
- Fruit
- Sweets
- Party Food/Cakes
- Desserts
- All Travel
- Disney
How to replace electrical outlets using QuickWire (Push-In) Connectors
When I made over the baby’s nursery I painted the area on the wall below the chair rail white. Therefore the ratty old off white outlets looked horrible. Back when I was actually finishing the room what I decided to do was just replace out the switch plate covers and then hide the outlets behind the furniture. (#KeepingItRealwithKimSix) but today I finally got off my horse and decided to suck it up and replace the outlets themselves. I have to admit they were REALLY bad.. I am pretty sure drunken monkies painted the room or something since they had about 4 layers of paint on them. Now there are 10,000 tutorials out there on how to replace your electrical outlets. My personal favorite is from my favorite DIY-guru Brittany. (In fact, I suggest you read HER post and THIS post because knowing more is always better.) Now, the thing about almost all those tutorials (including Pretty Handy Girl’s) is that they tell you how to use the traditional side screws for hooking up your new outlets. And that is a perfectly reasonable way of doing it, but I am too lazy for that. So today I’m showing you the shortcut using the push-in holes (also known as “QuickWire” connectors.) **Before undertaking this tutorial I am giving you a HUGE warning. If you are not comfortable working with electricity, or if you are AT ALL unsure of what you are going, please call a professional. Seriously.. I don’t want you to zap yourself to save $50. If the wiring looks strange or if you aren’t sure if something is right, don’t assume it will be okay if you just guess. I’m not responsible if you burn your house down! Also, be sure to check your local building code. In some jurisdictions, this type of electrical work may require a permit.** How to Replace Electrical Outlets:
Step 1: Turn off the power. DUH!
I use a voltage tester to check outlets. You want to check EVERY SINGLE OUTLET you are planning on working on. Outlets can run on different circuits in the same room. Also check the circuits with the light switch ON and OFF (if your room has a switch) because you don’t want to assume and outlet is off because the power is off and then have someone flip the switch on you. Lastly check the top and bottom outlet (they can actually be independently wired.) I always stick the voltage tester in the outlet (to make sure it is working) then go and turn off the power and check it again. You can also use a lamp or radio or whatever. Step 2: Remove outlet from wall
After removing the switch plate cover, unscrew the attachment screws at the top and bottom of the outlet and pull out the outlet. The wires are usually stiffer than you expect so you have to pull pretty hard.. but don’t “yank” them since you risk snapping a wire. Step 3: Keep track of where the wires are in the current outlet
Modern wiring is made up of three parts. A hot (black wrapped) wire, a neutral (white wrapped) wire and a ground (unwrapped copper) wire. If you are missing a ground wire you should consult an electrician since that is no longer legal under most residential building codes. Some outlets may have more than one incoming hot wire, especially if the circuit has a switch . You want your outlet to work correctly after you replace it so you need to wire it the same way. In my example I am using the simplest wiring setup you can get: Step 4: Remove wires from old outlet
If your wires are screwed onto the outlet you can unscrew them to remove them. If you are replacing a push-in style outlet (like I was) you need to release the wires from the connector. Push a screwdriver (or if the hole is smaller than screwdriver head, I like to use a nail) to release the wire. You have to push pretty dang hard. If you successfully remove the wires you can probably use them ‘as is’ without stripping any additional insulation off. If you can’t get them out, you can cut them off with a wire cutter and then strip them yourself. To know just how much insulation you should take off, use the strip gage on the back of the outlet. T Step 5: Hook up wires to new outlet
The nice part of this upgrade (besides the color) is that I am using tamper resistant outlets (they require you to push a plug into the three holes of an outlet at once. It won’t let you stick something into a single hole. ) Which is great for the baby's room. But ALL outlets are labeled with either “Hot” “White” or both. (You can see in the previous photo and the one below.) Some are harder to read than others, but look closely and you will find it. When reattaching the wires you want to make sure you put them on the correct side. Now here is where you save a bunch of time. Instead of screwing them to the side you can poke the exposed wires into the small holes on the back of the outlet. It is as simple as that. That is why it is called “QuickWire." There is a little clip inside the outlet that will catch the wire and won’t let it pull back out. This is another place where the strip gage comes in handy. If you have stripped the connect length of wire, you will know you have the wire pushed in far enough when hardly any exposed wire is showing. Once you have the hot and neutral wires inserted, you need to add the ground. Create a ‘hook’ shape in the wire and wrap it CLOCKWISE around the (typically green) screw. You want it to go clockwise so when you tighten the screw you are also tightening the loop of the wire. Step 6: Replace outlet in wall.
Carefully fold the wires back into the outlet receptacle and reattach the upper and lower screws.Step 7: (OPTIONAL: Exterior Walls Only)
If you’re outlet is in an exterior wall, you will want to add a little insulation gasket behind the switch plate. This keeps drafts out.You don’t need to use them on interior walls. Step 8: Replace Switch plate and turn on power.
Ta-dah! You did it! Isn’t she a thing of beauty? Now that I’ve finished and see how good they look I want to replace the rest of the off white outlets and switches! The total cost for this project was under $6 (I had to replace 5 outlets and they are about $1 each!) Share this:
I recently removed Disqus comments and converted to the Facebook commenting system. Thank you for your understanding.SIMILAR ARTICLES
Newer Post Older Post HomeWhat's Hot Right Now!
-
10 Christmas Eve Gift Ideas For Kids
-
How to Crop An Image In Cricut Design Space
-
How to replace electrical outlets using QuickWire (Push-In) Connectors
Blog Archive
Blog Archive March 2022 (2) October 2019 (1) September 2019 (9) August 2019 (4) July 2019 (1) June 2019 (2) May 2019 (9) April 2019 (4) February 2019 (4) January 2019 (1) December 2018 (1) November 2018 (13) October 2018 (3) September 2018 (4) August 2018 (3) July 2018 (5) June 2018 (6) May 2018 (4) April 2018 (10) March 2018 (8) February 2018 (12) January 2018 (8) December 2017 (4) November 2017 (4) October 2017 (7) September 2017 (8) August 2017 (6) July 2017 (5) June 2017 (7) May 2017 (8) April 2017 (14) March 2017 (11) February 2017 (12) January 2017 (16) December 2016 (15) November 2016 (12) October 2016 (16) September 2016 (14) August 2016 (10) July 2016 (12) June 2016 (11) May 2016 (12) April 2016 (7) March 2016 (13) February 2016 (11) January 2016 (16) December 2015 (20) November 2015 (12) October 2015 (14) September 2015 (10) August 2015 (8) July 2015 (8) June 2015 (6) May 2015 (12) April 2015 (10) March 2015 (12) February 2015 (10) January 2015 (10) December 2014 (15) November 2014 (13) October 2014 (13) September 2014 (16) August 2014 (12) July 2014 (11) June 2014 (13) May 2014 (16) April 2014 (14) March 2014 (16) February 2014 (14) January 2014 (13) December 2013 (12) November 2013 (12) October 2013 (17) September 2013 (12) August 2013 (9) July 2013 (7) June 2013 (5) April 2013 (1) March 2013 (4) February 2013 (7) January 2013 (12) December 2012 (9) November 2012 (8) October 2012 (10) September 2012 (14) August 2012 (16) July 2012 (11) June 2012 (13) May 2012 (14) April 2012 (13) March 2012 (17) February 2012 (7) January 2012 (16) December 2011 (4) September 2011 (4) August 2011 (3) May 2011 (7) April 2011 (15) March 2011 (1) February 2011 (2) January 2011 (2) August 2010 (1) July 2010 (2) January 2010 (5) December 2009 (1)Featured Projects
Copyright © 2017 The Kim Six Fix. Proudly Blogging on BloggerTag » How To Replace An Electrical Outlet
-
How To Replace An Electrical Outlet - The Home Depot
-
Replace Burnt Out Electrical Outlet And Old Damaged Socket
-
How To Replace An Electrical Outlet - YouTube
-
How To Replace An Electrical Outlet. Seriously, YOU Can Do This.
-
How To Replace A Standard 120-Volt Outlet Receptacle - The Spruce
-
How To Replace An Outlet - Dixon Leasing
-
How To Replace An Electrical Outlet: A Step-by-Step Guide
-
How To Replace An Electrical Outlet: 10 Simple Steps
-
How To Replace An Electrical Outlet
-
How To Replace An Outlet - Mr. Electric
-
How To Replace An Electrical Outlet : 6 Steps - Instructables
-
How Long Do Electrical Outlets Last & 10 Signs You Need To ...
-
How To Replace An Electrical Outlet?
-
Electric Outlet Cover Replacement - IFixit Repair Guide