How To Sew A Hem | 5 Types Of Hems For Beginners - Treasurie Blog

Share it Now, Make it Later!

Here I shall show you 5 ways how to sew a hem with a sewing machine. Different methods suit different fabrics and hem shapes, so keep reading to choose the best types of hems for your project.

How to Sew a Hem - 5 Types of Hems Tutorial

Nearly all clothing items will need a hem and most of the time the type will be determined by the pattern instructions. You can of course always substitute the hem type to better suit your fabric or personal tastes.

What is a Hem in Sewing?

A sewing hem is a method of finishing the edges of clothing or fabric items so it does not fray. It is usually created by folding the fabric edge and then sewing it in place.

The main 5 types of hems are:

1. Double fold hem
2. Narrow hem
3. Bias tape hem
4. Blind hem
5. Single fold hem - Zig-zag or overlocked hem

This article deals with machine hems. If you are looking for a hand-sewn hem, read how to sew catch stitch. Catch stitch is a common method to sew hems by hand. The article also shows you a couple of alternative hand stitches.

1. Double Fold Hem

This is one of the most commonly used hems in the majority of sewing patterns. It is easy to do and gives a nice professional finish to most items. A double fold hem is best for straight hems as curved hems tend to wrinkle and pucker.

1. Step 1: First, press or fold the raw edge over by the seam allowance. The most common in Treasurie sewing patterns is ½ inch (12mm) or ¾ inch (2cm).
2. Step 2: Press the hem over a second time by the hem seam allowance.
3. Step 3: Stitch close to the open folded edge with a matching bobbin. Because the bobbin thread will show on the right side of the garment, check the bobbin sewing machine tension is correct before you start.
4. Step 4: Press

2. Narrow Rolled Hem

A narrow or rolled hem is typically used for lightweight fabrics, particularly on blouses. It is also great for hemming curved edges such as those found on circular skirts. Although the method is very similar to the double folded hem, the hem is much narrower.

With a Regular Presser Foot

1. Step 1: On the wrong side, press up the raw hem edge by ⅜" (9mm). Stitch close to the bottom fold.
2. Step 2: Trim close to the stitches.
3. Step 3: Fold the hem again to create a ⅛" (3mm) hem. Stitch over the original row of stitches.
4. Step 4 - Press

Using a Rolled Hem Foot

If you find turning such a small edge difficult, you can also get machine feet that will automatically turn up the edge by ⅛ inch (3mm) or ¼ inch (6mm). They are called a rolled hem foot or a hemmer foot and are available for most makes of machine, either individually or in a kit.

See how the channel in the front of the foot rolls the fabric before sewing so there is no need to press the hem before sewing. This foot does save a lot of time but is best suited to straight hems.

Further Reading:

• How to use a rolled hem foot
• Sewing narrow hems without a rolled hem foot.
• How to sew a narrow hem

3. Bias Tape Hem

Using bias tape for a hem is great for thick fabrics where creating a rolled hem or double hem would be too bulky. This photo shows the wrong side of the hem. On the right side, you just see a single line of stitches.

There are a lot of types of bias tape but the most common one used for hems is ½ inch (12mm) single-fold bias. This can be shop-bought or you can make your own.

1. Step 1: Open one side of the bias tape and pin it to the right side of your garment. (Right sides together) Stitch in the crease of the tape which will be ¼ inch (6mm) from the raw edge.
2. Step 2: Press the bias to the wrong side. The seam will now be on the very edge of the garment.
3. Step 3: Stitch the top edge of the bias tape to the inside of the garment either by hand or machine.
4. Step 4: If you wish to have a wider hem, you can place the bias tape further up.

Further Reading:

• How to sew single fold bias tape
• How to make bias tape

4. Blind Hem

A blind hem is invisible (or almost invisible) from the right side of the fabric. You often see it on the bottom of slacks or skirts and it is normally used for wider straight hems. You can sew this with a blind hem stitch on most sewing machines with or without a special foot.

I have a full tutorial on how to stitch a blind hem with your machine.

5. Zig-zag or Overlocked Hem

A popular way how to sew a hem is using a combination of your serger and regular machine. You will see these types of hems in many store-bought clothing items. A zig-zag or overlocked hem is great for most fabrics and particularly bulky or hard-to-press fabrics. It is also great for sewing curved edges. This is called a single fold hem.

1. Step 1: Zig-zag or serger (overlock) the raw edge and then press it up once by the hem allowance.
2. Step 2: Stitch across on top of the finished edge.

How to Sew a Hem - More Types

You now know the basics of how to sew a hem so it is now time to expand your skills with decorative and creative hems. Here are a few more methods you can use.

Decorative Hem Ideas

The 5 ways how to sew a hem outlined above, create a traditional invisible or inconspicuous hem. But hems can also be used to add interest to an otherwise simple garment.

ADD TRIM - Have a bit of fun and add lace trim, ric-rac or even pom-pom trim to the edge of your clothing.

CONTRASTING BIAS - Another idea is to use the bias tape method but to put a contrast colored bias tape which shows on the outside. I quite like this method for dresses with a circle skirt.

Knit Hems

Knit hems are created completely differently to woven hems since the fabric does not fray and the hems need to retain their stretch so the stitches don't break.

You can create professional-looking knit hems with a simple zig-zag stitch and some hemming tape. Knit hems can also be sewn with a twin needle to produce a double row of stitching similar to those on most of your store-bought t-shirts.

Read the full tutorials:

• How to sew knit hems
• Sewing wiht a twin needle

Knit fabric hems can be transformed by using the lettuce hem technique. This technique creates a wavy hem with a stretched out zig-zag.

Frayed Hems

If neatly constructed hems are not your style, then the last one I have for you is a frayed hem. Frayed hems are best suited to open weave heavier fabrics and particularly denim.

Read the full tutorials:

• How to Fray Hems (4 different methods of fraying)

How to Sew a Hem by Hand

There are numerous stitches you can use to sew a hem by hand. Some of the more popular include the slip stitch, catch stitch, and running stitch. Read the full article on hand hemming stitches.

How to Sew a Hem - In Conclusion

Thanks for reading this article on how to sew a hem. Do you have any other hemming methods or types of hems you like to use? Please share below.

More Hem Articles

1. GENERAL HEMS – How to Sew a Hem
2. NARROW HEMS – How to sew a narrow hem
3. ROLLED HEM FOOT – How to use a rolled hem foot
4. WIDE HEMS – How to sew wide hems
5. CIRCULAR HEMS – How to sew circular hems
6. BLIND HEMS – How to sew a blind hem | blind hem foot
7. RUFFLED HEMS – Lettuce hems
8. KNIT FABRIC HEMS – How to hem knit fabric and twin needles
9. KNIT HEMS – Twin Needle
10. SQUARE HEMS – How to Sew Mitered Corners
11. HAND HEMS - How to sew catch Stitch and Hemming stitch
12. SCALLOPED HEMS - Sewing scallops
13. DOUBLE HEMS - Double fold hems
14. SINGLE HEMS - Single fold hems
15. HAND HEMS - Hemming Stitch

4.9/5 - (36 votes)