How To Sew Sheets - Flat & Fitted Easy Tutorial - Treasurie Blog

Share it Now, Make it Later!

Learn how to sew sheets! This tutorial will give you a fitted sheet pattern and flat sheet pattern. Sheets for beds, whether flat or fitted, all serve the same purpose, a good night’s sleep, and comfortable bedding. Deciding to sew your own sheets means you will need some guidelines and knowledge about the sizes, the fitting, and the quality of cotton you plan to invest in. The real end product is a good night’s sleep, under the best quality sheets.

How to Sew Sheets
How to Sew Sheets

How to Sew Sheets Tutorial

The decision to make bedding could depend on different factors, but usually, a new mattress and the need for new sheets would be the reason. Most people will agree that a flat sheet paired with a fitted sheet is preferable. A fitted sheet fits the mattress, and making up beds with them far outweighs the old-fashioned style of creating hospital corners.

The principle of sewing a fitted sheet is the same regardless of the size. Sizing will depend on the mattress size and height. A flat sheet is also easy to make if you feel you need both a flat sheet and a fitted sheet.

Supplies

Here are the supplies you will need when learning how to make bed sheets:

  • FABRIC – Natural fabric such as cotton or quilting cotton.
  • ELASTIC – 1/4 inch (6mm) wide elastic for the fitted sheet corners
  • SEWING SUPPLIES – Tape measure or ruler, sewing machine, scissors, thread, universal needles and stretch needles for sewing the elastic. Cutting such large pieces of fabric may be easier with a rotary cutter.

Best Fabric for Making Sheets

Fabric choice is important too. Look out for a higher thread count. Cotton sheets can be 100% cotton or poly-cotton. Winter sheets in a cozy flannelette make those winter nights warmer. Silk and satin sheets have the ultimate feel of luxury. Whatever your choice, the making of the sheets is the same.

Look for sheeting fabric that is extra wide.

Standard Sheet Sizes

Before you start here are some suggested finished measurements for a flat sheet. There are no standard sizes in the US, and a large variation between manufacturers and brands. If possible pull your favorite sheet from the cupboard and measure it up.

Type of Sheet:Finished Measurements: (WxL)
Single (Twin)75×100″ (190.5x254cm)
Double (Full)90×100″ (228.5x254cm)
Queen100×105″ (254x267cm)
King110×115″(280x292cm)
Flat Sheet Sizes

These are roughly the standard sheet sizes. There are other bigger and longer sizes of mattresses and their sheets will all have their own measurements. Getting XL (Extra Long) and bigger bed sizes may prompt you to want to make your own bed sheets.

how to make a pillowcase

Make Pillowcases

  • How to Make a Pillowcase (with a border)
  • French Seam Pillowcase

How to Sew a Flat Sheet (Free Sheet Pattern)

Steps to cut and sew a flat sheet:

Step1 – Cut the Fabric

Cut the fabric according to the sheet size (not mattress size) required for the bed you are making the flat sheet for.

  1. Work out your desired finished sheet size. You can use the table above or measure one from your cupboard.
  2. Add an extra 2” (5cm) in the width and 7” (18cm) in length to allow for the hems.
  3. Remember your width and length needs to include the depth of the mattress because you need to be able to tuck in the sheet.
How to Sew Sheets - Flat Sheet Cutting Instructions
How to Sew Sheets – Flat Sheet Cutting Instructions

Based on the previously mentioned finished sizes of flat sheets, here are some cutting suggestions.

Type of Sheet:Cutting Measurements: (WxL)
Single (Twin)77×107″ (190.5x254cm)
Double (Full)92×107″ (228.5x254cm)
Queen1002×112″ (254x267cm)
King112×122″(280x292cm)
Flat Sheet Sizes

Step 2 – Sew the Side Hems

  1. On the wrong side of the fabric, press the fabric on the sides by ½” (12mm).
  2. Press the sides by a further ½” (12mm) to form a double fold hem.
  3. Stitch the hems with a straight stitch using a matching thread.
 How to Sew Sheets - Sides
How to Sew Sheets – Sides

Step 3 – Sew the Bottom Hem

  1. On the wrong side, press up the bottom edge by 1/4″ (6mm).
  2. Press it up again by 3/4″ (2cm)
  3. Stitch across the hem making sure you backstitch at the ends.
  How to Sew Sheets - Bottom
How to Sew Sheets – Bottom

Step 4 – Sew the Top Hem

  1. Press over the top raw edge on the wrong side by 1-inch (2.5cm).
  2. Press it over again by 5 inches (13cm).
  3. Stitch across the hem, ensuring you backstitch at the ends.
   How to Sew Sheets - Top
How to Sew Sheets – Top

Your flat sheet is ready to put on your bed. The deeper hem is at the top of the sheet and the narrower hem is at the bottom.

How to Sew a Fitted Sheet (Free Fitted Sheet Pattern)

How to make your own bottom sheet:

Step 1 – Cut the Fitted Bed Sheet Fabric

Measure the length, width and depth of the mattress.

Cut a rectangle:

  • WIDTH = mattress width + (depth x 2) + 4″
  • LENGTH = mattress length + (depth x 2) + 4″

The addition of the 4-inches (10cm) measurements is for the seam allowances and a bit of overlap to the underside of the mattress.

EXAMPLE – For a 60×80″ mattress with a depth of 10″

  • WIDTH = 60 + (10×2) +4 = 84″
  • LENGTH = 80 + (10×2) + 4 = 104″
    How to Sew Fitted Sheets - Cutting
How to Sew Fitted Sheets – Cutting

Here are some standard mattress sizes. Depths can vary enormously between 6 to 12 inches so I haven’t included them in this table. Once again these can vary between brands and even countries.

SIZEMATTRESS SIZE
Single (Twin)38×75″ (96.5×190.5cm)
Double (Full)54×75″ (137x1905cm)
Queen60×80″ (152.5x203cm)
King76×80″ (193x203cm)
Mattress Sizes

Step 3 – Cut the Corners

Fold the fabric into quarters with the four corners one on top of the other. This is to enable you to cut out the corner accurately to make each fitted corner. Cut out a square of cardboard to make a template that will be the mattress depth plus 1 inch. Use the template to cut all four corners the same size.

    How to Sew Fitted Sheets - Cutting
How to Sew Fitted Sheets – Cutting

Step 2 – Hem the Edges

  1. On the wrong side, press over the top, bottom and sides by 1/2 inch (12mm). (Ignore the corners)
  2. Press over again by 1/2 inch (12mm) to form a double hem.
  3. Stitch the hems.
     How to Sew Sheets - Hems
How to Sew Fitted Sheets – Hems

Step 4 – Sew the Corners of the Sheet

  1. Pin the two cut edges right sides together.
  2. Sew the cut edges together using a ½’’ (12mm) seam allowance.
      How to Sew Sheets - Corners
How to Sew Fitted Sheets – Corners

Step 5 – Sew the Elastic

  1. Measure your piece of elastic to stretch gently around the mattress size. Generally, measure the distance to be elasticated and cut the elastic to about 1/2 to 1/3rd of the length you have measured.

Some fitted sheets are elasticated all around the perimeter of the sheet while others are just elasticated at the four corners.

  1. Sew the elastic straight onto the sheet edge using a zig-zag stitch. Try a width of 5.0 and a stitch length of 2.0.
  2. Stretch needles will prevent stitches from skipping. You can see a few skipped stitches in my sample as I forgot to change the needle.
  3. Pull the elastic as you sew to have an evenly spaced stretch of elastic for the garment.
  4. Backstitch the elastic at the ends.
       How to Sew Sheets - Elastic
How to Sew Sheets – Elastic

How to Turn a Flat Sheet into a Fitted Sheet

Did you know that it is easy to turn a flat sheet into a fitted sheet? Flat sheets are generally cheaper than fitted sheets. A budget option would be to buy flat sheets and use the above method to turn them into fitted sheets.

How to Store Sheets

Now you need to fold it and store the fitted sheet in your linen cupboard. Here are four easy steps to take to fold a fitted sheet and ways to store your sheets.

  1. Lay the fitted sheet on a table with the elasticated sides facing upwards.
  2. Fold the sheet into thirds by bringing the long side to the middle.
  3. Do this for both sides and then fold the fabric in half with the sides coming into the middle.
  4. Fold again.
  5. Fold the fitted sheet in half width wise and roll the sheet up. This rolled up sheet should resemble a cylinder.
  6. Store your newly made fitted sheets in a basket or container upright in the linen cupboard.

How to Make a Sheet – In Conclusion

Now you can proudly look at the fitted sheets you have made and access them neatly from the cupboard. Another useful storage recommendation is to put your fitted sheet, duvet cover, and matching pillow slips all into an old pillowcase. Mark the case accordingly, and you will never find yourself scratching in your linen cupboard for a set of matching sheets. Don’t forget to make some matching pillowcases.

More Home Decor Tutorials

  • How to Make Cushion Covers
  • DIY Coasters
  • How to Make a Tablecloth
  • Making Table Runners
  • How to Make Napkins
  • Hand Towel Pattern
  • How to Make a Fleece Blanket
  • DIY Tea Towels
How to Make Sheets

How to Make Fitted Bed Sheets

Learn how to make a fitted sheet for beginners. 5/5 – (1 vote) Print Pin Difficulty: Easy BeginnerKeyword: Sewing Patterns Total Time: 1 hour

Difficulty

Tools

  • Sewing Basics
  • Elastic

Materials

  • Sheeting Fabric

Instructions

  • Cut a rectangle. WIDTH = mattress width + (depth x 2) + 4" LENGTH = mattress length + (depth x 2)  + 4". Cut out a square in each corner that will be the mattress depth plus 1 inch.How to Sew Sheets
  • On the wrong side, press over the top, bottom and sides by ½ inch (12mm). (Ignore the corners) Press over again by ½ inch (12mm) to form a double hem. Stitch the hems.How to Sew Sheets
  • Pin the two cut edges right sides together. Sew the cut edges together using a ½’’ (12mm) seam allowance. How to Sew Sheets
  • Measure your piece of elastic to stretch gently around the mattress size. Sew the elastic straight onto the sheet edge using a zig-zag stitch. How to Sew Sheets
5/5 - (1 vote) Share it Now, Make it Later!

Author - Luisa Clare

Luisa Clare is the founder of Treasurie and a sewing educator with over 15 years of experience in dressmaking, pattern design, crochet, and craft education. She creates clear, beginner-friendly tutorials and printable patterns that home sewists and crocheters worldwide use to build skills and confidence. Learn more about Luisa and Treasurie.

Tag » How To Make A Fitted Sheet