How To Thread A Ratchet Strap - AGM Container Controls

How To Thread a Ratchet Strap March 13, 2017

Step 1

To thread ratchet strap, place webbing THROUGH slot in center rotating spool of closedratchet.

Step 2

Pull webbing through, leaving some slack.

Step 3

Start ratcheting (raising and lowering handle).

Step 4

Webbing will wind itself and be locked in place so that further ratcheting will rapidly increase tension instrap.

Ratchet Strap Release Instructions

Step 1

To release webbing, pull and hold release tab on top assembly to override ratcheting function. . .

Step 2

. . .and open ratchet until both assemblies are in-line and top assembly clicks into detent.

Step 3

Grab webbing from non-fixed side and pull to release webbing.

Video Transcript

First, thread the ratchet fastener by feeding one end of the strap through the take-up spool.

Then, continue pulling the strap to remove unnecessary slack.

Once the slack has been reasonably removed, begin ratcheting the fastener up and down until the strap is suitably tight.

To release tension on the strap, slightly lift the fastener up and press the release lever. Then, pull the strap out of the take-up spool.

Looking for custom Kevlok Tie Down Straps?

We manufacture our straps here in the United States and have over 40 years of experience.

Build a Custom Strap

Talk to a professional

Related Blog Posts

March 13, 2017

Selecting the Right Desiccant

March 13, 2017

How Much Desiccant Do I Need? A Guide to Quickly Estimating Desiccant Amounts

Calculating how much desiccant you need is really tricky. To get started, use AGM's guide for quickly estimating desiccant amounts. March 13, 2017

What’s the Difference Between Orange and Blue Indicating Silica Gel?

My Quote You do not have any products added to your quote. Go To Products

Trouble finding a product? Contact us.