How To Tie Dye Step By Step - Easy Tie Dying For Beginners

Share it Now, Make it Later!

This tutorial will show you how to tie dye step by step so you can make t-shirts, socks, hoodies, and a whole wardrobe if you wish! Learning tie-dying is a little messy but really fun. The end result is never right or wrong, and every dye-dye shirt or design you make will be one of a kind. Once you have the suitable materials, the process is so easy.

Tie-dye is a fabric dyeing process that involves tying up different parts of the fabric so the dye penetrates unevenly, giving many different effects according to the tying process used. You will start with folding and tying fabric with rubber bands before applying dye with bottles. Once the bands are cut, the tied areas will remain white and the rest will be a colorful creation.

Table of Contents (Click to Expand)

Toggle

• How to Tie Dye Tutorial
• Best Materials for Tie Dye
• How to Tie Dye Shirts Video Tutorial
• How to Tie Dye, Step by Step With Pictures
• Tie Dyeing in a Bucket
• Types of Tie Dye Techniques for Folding
• Upcycle Ideas
• Common Tie Dye Mistakes and How to Fix Them
• Taking Care of Tie Dye
• Tie Dye Frequently Asked Questions
• Conclusion
• Easy Tie Dye Instructions

How to Tie Dye Tutorial

In this tie dye tutorial, I will show you all the basic tie dye instructions including preparation, tying the fabric, and dyeing. Once you have the basics, I'll give you 6 easy types of tie dye techniques including a spiral, circles, stripes and hearts. In case you still have questions, the article ends with some of the frequently asked tie dye questions.

To summarize the steps of how to tie dye a shirt or fabric:

1. Tie the fabric with rubber bands
2. Immerse in dye or apply dye with a squeeze bottle.
3. Rinse the dye from the fabric
4. Dry the item

You can combine tie-dye with fabric paint and other mediums to create one-of-a-kind pieces for your wardrobe. Often when we think of tie dye, we think of bright colors, but you can use pastels, earthy tones, or anything that takes your fancy. This tutorial will show you traditional tie dye techniques but you can also get a modern look tie dyeing using bleach.

Best Materials for Tie Dye

Here are the supplies you will need for tie-dye. Besides the dye, most of these you should already have.

• DYE POWDER - Get a few colors in a tie dye kit.
• FABRIC - Think shirts, t-shirts, socks, bags or hoodies
• BUCKETS - Plan on having one bucket for each color.
• WATER - Don't use plastic sinks as they may stain with the dye.
• STIRRERS - Wooden spoon or dowel rods to stir fabrics.
• BANDS - Rubber bands or twine to tie the fabric.
• GLOVES - Rubber gloves to stop your hands from getting stained.
• MARBLES - Marbles are a great object to wrap into the fabric and tie.
• TOOLS - Scissors and metal tongs.
• OPTIONAL - Soda Ash - Some type of dyes will need this to properly clean the fabric ready for the tie-dyeing.

Best Fabrics to Tie Dye

You will need a piece of fabric or a clothing item to dye. It must be 100% cotton, rayon, or natural fibers such as silk for the best results. You can experiment with fabric blends but do try them out first, as they may not take the dye as well.

Most dye packets will make enough color to do several articles, so finding a few articles to dye together is best. You could use the same colors but create different patterns on each article of clothing.

Rummage through your wardrobe for the following items for dyeing:

• Women's shirts, men's shirts, kids shirts
• Hoodies
• Socks (these make the best presents!)
• Cotton tote bags
• Aprons

Best Dye for Tie Dye

Commercial tie dye colors are best. Consider purchasing tie dye kits with several colors in smaller quantities for smaller quantities. Most kits come with applicator bottles filled with a powder dye that you add water to.

One Step Dyes: When people ask this question, they usually seek the easiest option. Dyes labeled one-step are usually the easiest, as all you need to do is add water. Choose fiber reactive dyes that are brighter and longer lasting.

Tulip is a great brand that creates vibrant one-step dyes specially designed to tie dye. You can buy these in kits of several colors, and they come with applicator bottles to make your job even easier. The contain soda ash already, eliminating an extra step at the beginning. I also found a kit at Kmart for just $9. It just had 3 colors, but it was a great starter kit.

Other Dye Sets: Several other brands make suitable dyes, but you may have to perform an additional step to wash your fabric in soda ash before dying. Procion MX tie dye kits by Jacquard are also popular as they are fixed with cold water. For most tie dye projects, all purpose dyes like Rit or Dylon are not recommended. You can also use bleach to tie dye for a reverse effect.

This isn't a hassle since you have to pre-wash your fabric anyway. All-purpose fabric dyes can be used for tie-dye, but you will end up with paler colors that don't last as long.

How to Tie Dye Shirts Video Tutorial

Check out the Youtube video I made on how to tie dye for beginners! It really is easy to tie dye.

How to Tie Dye, Step by Step With Pictures

Here are the 6 steps for making tie dye fabric:

Step 1 - Preparation (Mix Dye & Wash Fabric)

Get the workspace area ready for a messy event. Cover tables with plastic, and if you feel it is necessary, the floor as well. Working outside gives you more freedom, especially if you decide to make this a family affair.

Prepare the dye mixture according to the instructions on the packet. One-step dyes such as Tulip brand usually just need water added to the applicator bottles. If you are using larger dye packets, you can use one of your buckets or containers to mix and contain the dye.

Wet or wash your fabric. All new clothing items, particularly shirts, should be prewashed in case they have starch or chemicals that may prevent the dye from penetrating. Using fabrics or shirts, you plan to upcycle will not require pre-washing but should simply be wet.

TIP: Most dyes work best if your fabric is wet already. The fabric should be wrung as much as possible so it is damp rather than sopping wet. Check the dye instruction leaflet to confirm.

Step 2 - Fold and Tie the Fabric with Bands

When your working surface is prepared, you can start creating a tie dye pattern. There are several methods you can use but it is best to start simple and be happy with the outcome.

Choose a tying method. Rubber bands work well in most instances. Otherwise, tie with twine. The idea with tie-dye is the tied-up parts with bands or strings will not absorb the dye. This technique creates the patterns and swirls associated with tie dye. Rubbing some candle wax on the twine will make it extra resistant to the dye.

I will go through 6 basic tye dye pattern techniques in the next section. By far the easiest way to tie dye a shirt with rubber bands is to just scrunch your fabric all together and randomly put rubber bands over it. This is called the scrunch method.

Step 3 - Apply the Dye

This is the fun part and also the messy part! You will add dye to your fabric.

To contain the mess, I used a cooking rack over a large glass oven dish. Using a cooking rack means the fabric doesn't sit in the excess dye that runs off. This will give you better color definition and make cleaning up really easy.

Greater control of where your color is applied can be obtained by putting dye in plastic applicator bottles and squeezing it where you need it. You could also put different colors in bowls and paint the dye where you want it. The excess dye can be quickly absorbed by paper towels.

Don't forget that if you overlap colors, they will mix and create a new color. For example, if you put blue on top of yellow, you'll get green. It is up to you whether you want the colors wholly separate or with some overlap. While green is nice, if you get a muddy brown in the overlapped sections it mightn't be what you want. Here is a white cotton shirt I have tied up and put the dye in different sections between the bands.

After using an applicator or brush, place the item in a plastic bag so the dye can penetrate. The time it sits in the bag will depend on the intensity you desire. Most one-step dyes recommend 6-8 hours, but you can leave it longer if you want even more vibrant colors.

Step 4 - Rinse Out

When you are satisfied with the color, remove the item from the plastic bag and rinse it in cold water. Keep going until the water runs clear.

Should I rinse tie-dye in hot or cold water? You should always rinse dye in cold water to prevent excess removal of the dye. In addition, hot water tends to shrink cotton fabrics so you may end up with a shirt that is too small. If you must use some heat, try luke warm water.

Step 5 - Repeat for New Colors

If you plan on using different or overlapping colors, repeat the dying process with other colors. Using different colors requires careful planning because colors change when they are dyed together. If you unwrap and re-tie the dyed fabric before dying the next color, the white parts take on the new color while the first color changes according to a color mixing chart.

Step 6 - Remove Bands, Wash & Dry

Remove the rubber bands once the rinsing is done and the water is running clear. Cutting them off it the easiest. Unwinding takes forever and is hard on your hands. Look at how bright my newly-washed shirt is!

You can wash the dyed fabric items normally by hand or machine. There may still be small amounts of dye that come out, so you must wash the fabric separately. Use cold or lukewarm water to keep your tie dye shirt looking bright. You can then hang it out to dry and give your fabric a good iron.

Tie Dyeing in a Bucket

Alternatively, you can tie-dye in a bucket. When you have tied the fabric, get ready to swirl it in the bucket of dye. Pick it up with the tongs to check the color. If you are not happy with the intensity of the color, continue to leave the fabric in the dye for longer. Check the instructions on the packet for times and amounts of water.

Finally, wrap the dyed fabric while wet into a plastic bag to allow the colors to set further. Check the instructions on the commercial dye for the time allocation for this.

Types of Tie Dye Techniques for Folding

There are many different ways to tie and fold the fabric. You can create effects by either random tying or aiming for a more controlled look with some suggested patterns. There will never be two tie dyeddesigns exactly the same, which is part of its charm.

1. Scrunching (Crumple Tie-Dye)

Just scrunch and crumple the shirt up into a ball and wrap the rubber bands around to tie up the folds in a random scrunched effect. The blue and pink in the photos below can be created by immersing in one color of dye. For a multicolor effect, use squeeze bottles to randomly put different colors on the fabric.

2. Small Circles

Use marbles or stones to create a small circular tie dye pattern. Push a marble under the fabric and fold the fabric over the marble. Twist the fabric slightly and then tie underneath with elastic bands or twine. Leave spaces in between each marble to allow the dye to penetrate the fabric.

If you don't have marbles, you can get a similar effect by just pinching the fabric and applying a band. The main difference is that marbles give a more consistent size to your tie dye circles.

3. Stripes

Fold the fabric like a fan or pleats. Make the folds as narrow or wide as you like. Then put rubber bands over the folds at different intervals. Twine will also give the tie dye effect, and the tighter the twine is tied, the less dye seeps into the folds, and the more white or plain spaces are evident.

4. Mirror Images

Fold the fabric or the item of clothing in half and insert a marble to tie into a double layer of the fabric. Tie them in exactly the same way, but the two pieces of the fabric will be together.

Dye in the normal way, and when you open up your fabric, there should be two ‘mirror’ images on the fabric. In tie dye there will never be exactly two images the same, but there will be a definite similarity.

5. Rainbow Spiral Shape

To create the rainbow spiral, you need to use your wooden spoon handle or dowel stick to turn the fabric into a spiral. This technique works best with adult sized t-shirts. When testing, I tried some kid's shirts, and they were harder to twist.

How to tie dye spirals: Start by laying the fabric flat and placing the stick into the center of the fabric. Then twist the stick round and round to form a circle of fabric. It will look like a pie shape. You can also just pinch the center and then twist. When the circle is complete, remove it gently from the table and put the elastic bands around to secure the spiral.

Imagine your colors are going to be in thirds or quarters around the pie/circle of the spiral. Use yellow, turquoise, and red for your basic colors. Add other rainbow colors if you wish. Paint the dye on to be more controlled with your colors. Use a sponge applicator for easy painting of the dye.

6. How to Tie Dye a Heart

First, draw a heart shape on your fabric. For perfectly symmetrical hearts fold the fabric in half. Using a large running stitch (up and down), stitch around the heart and then pull the stitches really tight so the heart gathers up.

Put a rubber band on top of the stitching. A lot of tutorials just say to gather up the fabric in a heart shape but I think using the running stitch to gather it all up gives a more accurate shape. When your fabric is dry, you can remove the stitching.

Upcycle Ideas

Here are some suggestions of interesting items to ‘upcycle’ with Tie Dye:

• T-shirts, especially white ones.
• Scarves
• Headbands and hair scrunches
• Bags, fabric tote bags
• Caftans and beach wraps
• Aprons and oven gloves....in fact, anything you fancy needs a bit of zing and zest!

Common Tie Dye Mistakes and How to Fix Them

Some of the common tie-dye mistakes result in faded colors or irregular patterns. These are not ideal, but they are easy to fix if you know how to do so.

One of the common mistakes is not prewashing the fabric, which may have some chemicals or starch on the surface which will repel the dye absorption. Fabric should always be washed and then thoroughly re-dampened before applying dyes.

One more problem is that you over-saturate the fabric with dye, and the colors blend into a muddy mess. To prevent this, squeeze out excessive moisture from the fabric and apply less dye for defined patterns.

Improper binding of the rubber bands may also result in uneven results. Tighten up your rubber bands or twine to create distinct sections where the dye can't penetrate.

Finally, rinsing with hot water too early can cause some colors to fade. Rinse first with cold water to let the dye set, then after dyeing for several hours, wash it with lukewarm water. Do this, and you will get vibrant, long-lasting designs.

Taking Care of Tie Dye

When learning how to do tie dye, the important thing to remember is that they should be washed on their own. If you throw them in the washing machine with other colors or whites, then you will probably have some dye transfer and ruin some of your clothing. Read more about washing tie dye.

Tie Dye Frequently Asked Questions

Should your shirt be wet or dry for tie dye?

Most fabric dyes take better if they are wet to start with as the dye can better and more evenly penetrate the fabric. It is however still possible to tie dye dry fabrics. The object of tie dying is not necessarily to get an even dye job!

How long should you leave the dye for tie dying?

This depends on your dye instructions but as a general rule, the longer you leave the dye on your fabric the stronger and longer-lasting the colors will be. 6-8 hours is normal.

Can you tie dye with food coloring?

Food coloring can be used instead of commercial dyes on some fabrics such as polyester. Mix the food coloring with a small amount of water and pour it into an application bottle. Washing your fabric after dying with white vinegar will help set the dye. Use food coloring on natural fabrics like cotton, it tends to give more subtle results. But if you like pastels, then this might work well for you!

Can you tie dye socks?

Socks can be tie dyed using any of the methods above. The main thing to keep in mind is that as they are smaller items, you will need to cut down on the number of bands you use. Tie the socks together if you want them to match. The scrunching method is one of the easiest for socks. Socks sometimes have elastane to make them stretch, but this may stop the dye from penetrating. Check the label for the fiber content before you start.

How do you tie dye a hoodie?

DIY tie dye hoodies are super trendy at the moment, especially scrunched or rainbow designs. Carefully fold the hoodie in half along the center zipper if you want the 2 sides to match. Otherwise, do a freestyle design using a simple scrunching method. Make sure your hoodie is 100% cotton for the best results. If you find a matching pair of sweatpants you can have a whole set!

How to remove dye?

If you accidentally get dye on your clothing, then the only solution is to use a commercial stain or dye remover. Rub your hands can be rubbed with soap and water. It may take a few days to fade completely.

Conclusion

Tie dying was a popular fabric trend in the ’60s, a symbol of free expression and the happy, hippie era. The tie-dying technique makes a comeback every so often, and it never loses its symbolic free-spirited individuality through tie-dye’s unique designs. Today, you'll see tie dye worn by celebrities, proving it is never really out of style.

Easy Tie Dye Instructions

Learn how to tie dye with this easy tutorial. 4.8/5 - (168 votes) Print Pin Difficulty: Easy BeginnerKeyword: Craft Total Time: 1 hour hour

Difficulty

Tools

• Rubber Bands
• Rubber Gloves
• Plastic Bags
• Metal Baking Tray

Materials

• Fabric to Dye White 100% cotton is best
• Fabric Dye Commercial dyes made for tie-dye are best. Look for one step dyes that come with applicator bottles.

Instructions

• Pre-wash your fabric and leave it damp. Mix the dye with water according to the manufacturer's instructions. One-step dyes generally just need water added to the applicator bottles.
• Tie the fabric with the rubber bands. Different designs can be achieved with different tying techniques.
• Put the tied fabric on a baking tray over a sink or large container that will catch the dye. Using the applicator bottles, squeeze dye in your desired areas.
• Place the item in a plastic bag for 6-8 hours.
• Remove from the bag and rinse in cold water until clear. Cut the rubber bands, and hang to dry.

Notes

See the full tutorial at https://blog.treasurie.com/how-to-tie-dye/ 4.8/5 - (168 votes)

learn to embroider Fast

Like paint-by-numbers—but with thread. This course gives you everything you need to learn embroidery the fun and frustration-free way.

Yes! WANT TO LEARN

More Tie Dye Crafts and Techniques

• How to Wash Tie Dye - Prep The Right Way
• How To Bleach Tie Dye EASILY (Reverse Tie Dye)
• How to Tie Dye Socks, The Beginner-Friendly Way!
• Best Tie Dye Patterns, Easy Designs Step by Step