How To Use A Socket With A Ratchet Wrench? - Wonkee Donkee Tools

Our other sites:

Read more

• What Is A Socket?
• A Brief History Of The Socket
• What Are Sockets Used For?
• What Are The Parts Of A Socket?
• How Does A Socket Work?
• What Are The Different Types Of Socket?
• What Are Sockets Made Of?
• What Are Sockets Coated With?
• How Are Sockets Manufactured?
• How Are Sockets Measured?
• What Socket Sizes Are Available?
• Why Is A Socket's Length Important?
• What Socket Accessories Are Available?
• What Is A Hex Socket?
• What Is An Impact Socket?
• What Is A Socket Bit?
• What Are The Different Types Of Socket Bits?
• What Is A Spark Plug Socket?
• What Is An Oil Filter Socket?
• What Is A Universal Socket?
• What Is An Insulated Socket?
• Which Turning Tools Can Be Used With Sockets?
• How To Choose A Socket Set?
• How To Use A Socket With A Ratchet Wrench?
• How To Use An Adaptor With A Socket And Ratchet?
• How To Use An Extension Bar With A Ratchet And Socket?
• How To Remove Wheel Or Lug Nuts Using A Pneumatic Impact Wrench?
• How To Separate A Socket That Is Stuck To A Ratchet?
• What Are The Different Types Of Socket Storage Cases?
• What Are The Different Ways Of Organising Sockets?
• Socket Maintenance And Care
• Sockets Glossary Of Terms
• Best Socket Sets Review

Home » sockets-and-socket-sets » How to use a socket with a ratchet wrench? How to use a socket with a ratchet wrench? Chris 11th August 2021 How to use a socket with a ratchet wrench?

Learning how to use a socket with a ratchet with a is one of those things that we all have a good idea on how to do it. However, this guide provides you with a few extra pointers before you start, making it a lot of easier to use effectively and get the most out of your tools.

If you want to learn more about other sockets visit: What are the different types of socket?

Step 1 – Select a Socket

You should always use the correct size socket for the fastener you want to turn. Using the wrong size risks damaging both the fastener and the socket.

If you know what size socket the fastener will require, then selecting it is simply a matter of finding the socket marked with the correct size.

If you are unsure of what the correct socket size for the fastener is, take the socket that looks closest to the size you require and place it on the fastener you are looking to turn. You do not need to attach the socket to the ratchet at this stage. 

If the socket appears too loose on the fastener or is too small to fit onto the fastener, try the next size up or down until you reach one that has a close fit on the fastener.

You will need to use a socket with a drive socket size that corresponds to the drive square size of your ratchet. 13mm socket with 1/2″ drive, 13mm socket with 1/4″ drive, Ratchets with different size drive squares.

See Latest Prices

Step 2 – Attach the Socket to the Ratchet

To attach the socket to the ratchet wrench, the drive square of your socket must be the same size as the drive square of your ratchet. If this is not the case, you will need to use an adapter.

Once you have selected the correct socket, line the drive socket up with the drive square of the ratchet. If the socket has a drive socket side hole instead of an internal notch or groove within the drive socket, then this should also be lined up with the ball bearing on the drive square of the turning tool.

Some ratchets have a button on the back of the ratchet head that releases the ball bearing on the drive square. This may have to be pressed in order to attach the socket to the drive square on these ratchets. 

Once lined up, press the socket onto the drive square of the ratchet. You should hear the ball bearing of the ratchet drive square snap into place on the drive socket side hole or internal notch. After you have done this, the socket should be firmly attached to the ratchet.

Latest prices of Socket Sets

Step 3 – Check Turning Direction

Make sure that you are turning the socket in the right direction. To check which direction the ratchet is turning, take hold of the socket in your left hand, and, with your right hand, move the handle of the ratchet left and right.

When looking down on the head of the ratchet, it should turn the socket clockwise to tighten a fastener, and anti-clockwise to loosen it. If the ratchet is turning the socket in the wrong direction, move the lever or dial switch on the back of the ratchet head into the other position.

Step 4 – Place the Socket onto the Fastener

Line the socket head up with the fastener head or nut you wish to turn. You may have to rotate the socket slightly in order to do this. Once lined up correctly, place the socket head on the fastener head or nut you wish to turn.

Step 5 – Turn Fastener

Rotate the handle of the ratchet in the direction you wish to turn the fastener. When there is no more room to swing the ratchet handle, or you reach what is comfortable whilst holding the ratchet, rotate the ratchet handle back in the opposite direction.

 

As you do this, the ratchet mechanism will not turn the socket or fastener, allowing the handle to be repositioned to the start point again, ready to once again turn the socket and fastener.

Step 6 – Continue to Turn

Repeat step 5, swinging the ratchet handle back and forth, until the fastener is tightened or the nut is removed.

Step 7 – Remove the Socket from the Ratchet

How you remove the socket from the ratchet will depend on the ratchet you have. With some less expensive ratchets, you simply pull the socket off from the ratchet drive square.

 

This may require a little force to overcome the spring-loaded ball bearing in the ratchet drive square.

 

Other ratchets have a button on the back of the ratchet head. When this is pressed, it releases the spring from the ball bearing inside the ratchet drive square, which will then allow the socket to fall off the ratchet drive square.

 

Once you have completed this step you now know how to use a socket with a ratchet wrench.

Latest prices of Socket Sets Previous

How to choose a socket set?

Next

How to use an adaptor with a socket and ratchet?

Amazon Associate Partners

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Email: [email protected]

• About Us

• Terms & Conditions

• Privacy Policy

• Contact Us