How To Use A Trailer Brake Controller - Towing 101

The store will not work correctly when cookies are disabled. Your account has been temporarily locked, so no orders can be placed at this time. Please contact our accounts receivable department at 877-287-8634 or email [email protected]. Menu

• Trailer Hitches
  • Rear Mount Trailer Hitches
    • Class 1 Trailer Hitches
    • Class 2 Trailer Hitches
    • Class 3 Trailer Hitches
    • Class 4 Trailer Hitches
    • Class 5 Xtra Duty Trailer Hitches
    • Class 5 Commercial Duty Trailer Hitches
  • Front Mount Hitches
  • Multi-Fit Trailer Hitches
  • Bumper Mount Trailer Hitches
  • Weld-On Trailer Hitches
  • RV Trailer Hitches
  • ATV Towing
    • ATV Ball Mounts
    • ATV Cargo Carriers
• Flat Towing
  • Tow Bars
  • Base Plates
  • RV Trailer Hitches
  • Flat Tow Brake Systems
  • Dinghy Towing Harnesses
  • Accessories
• 5th Wheel Hitches
  • 5th Wheel Hitches
    • 16K
    • 20K
    • 24K
    • 25K
    • 30K
  • OEM Puck System 5th Wheel Legs and Silders
  • Custom Under-Bed 5th Wheel Brackets
  • Industry-Standard 5th Wheel Base Rails
  • 5th Wheel Pin Boxes
  • Gooseneck Adapters
    • X5 5th Wheel to Gooseneck Adapter Plates
    • 5th Wheel Rail Gooseneck Hitches
  • 5th Wheel Extension Harnesses
  • 5th Wheel Sliders
  • 5th Wheel Accessories
• Gooseneck Hitches
  • OEM Puck System Gooseneck Products
  • Gooseneck Hitches
    • Double Lock EZr
    • OEM-Style
    • Original Double Lock
    • Folding Ball
    • Fixed Ball
  • Gooseneck Balls
  • Gooseneck Installation Brackets
    • Under-Bed Installation Brackets
    • Over-Bed Installation Brackets
  • Gooseneck Couplers
  • 5th Wheel Adapters
    • 5th Wheel Rail Gooseneck Hitches
    • X5 5th Wheel Adapter Plates
  • Gooseneck Extension Harnesses
  • Gooseneck Accessories
• Towing Electrical
  • Brake Controls
    • Electric Trailer Brake Controllers
    • Brake Controller Wiring & Brackets
  • Custom Wiring & T-Connectors
  • Original Equipment Replacement Connectors
  • Extension Harnesses
  • Tailgate Sensors
  • RV Harnesses
  • Taillight Converters
    • 3-to-2-Wire Taillight Converters
    • PWM Taillight Converters
    • Specialized Taillight Converters
    • Powered Converter Wiring Kits
  • Electrical Adapters
    • Factory Harness Electrical Adapters
    • 2-Way Electrical Adapters
    • 4-Way Electrical Adapters
      • 4-Way Flat Electrical Adapters
      • 4-Way Round Electrical Adapters
    • 6-Way Electrical Adapters
    • 7-Way Electrical Adapters
    • Dual-Output Electrical Adapters
  • Breakaway Systems
    • Breakaway Kits
    • Breakaway Components
  • Plugs and Sockets
    • 2-Way Connectors
    • 4-Way Connectors
      • 4-Way Flat Connectors
      • 4-Way Round Connectors
    • 5-Way Connectors
    • 6-Way Connectors
      • 6-Way Round Connectors
      • 6-Way Square Connectors
    • 7-Way Connectors
      • 7-Way RV Blade Connectors
      • 7-Way Round Connectors
    • Brackets and Dust Covers
      • Easy-Mount Connector Brackets
      • Connector Mounting Brackets
      • Dust Covers
  • Electrical Testers
  • Towing Lights
  • Electrical Components
    • Snap Locks and Wire Connectors
    • Terminals
    • Wire Protection
    • Trim Retainers
    • Fuses and Fuse Holders
    • Circuit Breakers
    • Flashers
    • Relays
• Towing Accessories
  • OneControl Auto
  • Rebellion XD Ball Mount and RockerBall
  • Ball Mounts
    • 1-1/4" Ball Mounts
      • Euro Mount Ball Mounts
      • Class 1 Ball Mounts
      • Class 2 Ball Mounts
    • 2" Ball Mounts
      • Class 3 Ball Mounts
      • Class 4 Ball Mounts
      • Xtra Duty Forged Ball Mounts
      • Channel Mounts and Adjustable Ball Mounts
      • Loaded Ball Mounts
      • Fusion Ball Mounts
      • Multi-Ball Mounts
      • Specialty Ball Mounts
      • Right-Angle Ball Mounts
      • Dual-Length Ball Mounts
    • 2-1/2" Ball Mounts
      • Commercial Duty Forged Ball Mounts
      • Channel Mounts and Adjustable Ball Mounts
    • 3" Ball Mounts
    • Towing Starter Kits
    • Adapters & Extenders
      • Receiver Tube Adapters
      • Receiver Tube Extenders
    • ATV Ball Mounts
    • Ball Mount Accessories
  • Pintle Hooks & Mounts
    • SecureLatch Pintle Hitches
    • Ball and Pintle Combinations
    • Pintle Hooks
    • Pintle Mounts
    • Lunette Eyes
    • Pintle Accessories
  • Trailer Balls
    • RockerBall Trailer Balls
    • 1-7/8" Trailer Balls
    • 2" Trailer Balls
    • 2-5/16" Trailer Balls
    • 3" Trailer Balls
    • Specialized Trailer Balls
    • Switch Balls
      • Switch Ball Sets
      • Switch Ball Accessories
      • Switch Ball Replacement Parts
    • Trailer Ball Accessories
  • Towing Security
    • Locks
      • Hitch Locks
      • Coupler Locks
      • Trailer Locks
      • Specialty Locks
    • Anti-Rattle Hitch Pins & Clamps
    • Hitch Pins & Clips
      • 1/2 In.
      • 5/8 In.
    • Safety Pins
  • Hitch-Mounted Accessories
  • Hitch Tube Covers
  • Fish Wire
  • Wheel Chocks
  • Tow Hooks & Tow Straps
  • Sway Control
  • Tow Mirrors
  • ATV Towing
    • ATV Ball Mounts
    • ATV Cargo Carriers
  • Fabrication Components
    • Receiver Tubing
    • Hitch Bars
    • Loops & Anchors
• Weight Distribution
  • Weight Distribution Hitches
    • TruTrack Integrated Sway WD Hitches
    • Trunnion Bar WD Hitches
    • Round Bar WD Hitches
    • Weight Distribution Hitches with Sway Control
  • Weight Distribution Components
    • Shanks
    • Replacement Heads
    • Spring Bars
    • Hookup Brackets
    • Hardware
  • Sway Control
• Trailer Parts & Accessories
  • Axle Components
    • Brake Assemblies
    • Hubs
    • Axle Bearing Kits
    • Dust Caps & Grease Seals
    • Equalizers
    • Shock Assemblies
    • Axle Springs
    • Suspension Upgrade Kits
    • Axle Hardware
    • AP Kits
    • Axle Hanger
  • Couplers
    • QuickPin Couplers
    • Straight-Tongue Couplers
    • A-Frame Couplers
    • Channel Mount Couplers
    • Lunette Rings
    • Safety Pins
  • Jacks
    • Electric Trailer Jacks
    • Swivel Jacks
    • Marine Jacks
    • A-Frame Jacks
    • Direct-Weld Square Jacks
    • Jack Accessories
    • Jack Replacement Parts
  • Safety Chains
  • Hooks
    • Certified S-Hooks
    • Snap Hooks
    • Quick Links
    • Clevis Hooks
    • Joining Hooks
  • Winches and Winch Straps
    • Pulling Winches
    • Lifting Winches
  • Wheel Chocks
  • Trailer Straps
  • Trailer Tie-Down Anchors
• Cargo Management
  • Cargo Carriers
    • Tray-Style Cargo Carriers
    • Basket-Style Cargo Carriers
    • Roof Rack Cargo Carriers
    • ATV Cargo Carriers
    • Cargo Carrier Accessories
  • Bike Racks
    • Tray-Style Bike Racks
    • Standard Bike Racks
    • Premium Bike Racks
    • Clamp-On Bike Racks
    • Bike Rack Accessories
  • Roof Rack Accessories
  • Adapters & Extenders
    • Receiver Tube Adapters
    • Receiver Tube Extenders
  • Anti-Rattle Pins & Clamps
  • Cargo Straps
  • Tie-Down Anchors
  • Seat Covers

Settings

• Home
• Understanding Towing
• How to Use a Trailer Brake Controller - Chapter 8

How to Use a Trailer Brake Controller

Brake Controller User Guide & How to Make Adjustments

Using a brake controller while towing a trailer involves setting up the controller, adjusting trailer brake gain, adjusting braking sensitivity, manually activating the trailer brakes and possibly choosing a few personal settings.

In this guide we will walk through how a trailer brake controller works and the steps involved in how to use a brake controller while towing with trailer brakes.

If you need to adjust your trailer brakes, check out our guide!

How to Use Trailer Brake Controller Video

Shop Brake Controllers Now

What Is a Brake Controller?

A brake controller is an electronic device that regulates the electric trailer brakes. It allows the driver to activate and monitor trailer brake activity from the cab of the vehicle.

A brake controller mounts in the cab of the vehicle and generally has a few different controls, such as an interface to view braking information and buttons to control the output and manual activation. Trailer brake controllers come in many different styles and capacities.

Need help installing your brake controller?

How Does a Brake Controller Work?

Time Delay vs Proportional

There are two basic types of brake controllers: time-delay and proportional or inertia-based. Each type is classified by the method of activation the brake controller uses.

Time-Delay Operation

A time-delay brake controller operates on very simple electrical principles. As soon as the driver presses the brake pedal, the time-based brake controller activates the trailer brakes, applying an increasing amount of power, fixed over time. This is called gain.

The gain setting of a time-delay brake controller can be adjusted by the driver to accommodate each specific trailer. However, the time-delay approach is not as precise as the proportional method.

Proportional Operation

A proportional or inertia-based brake controller uses an electrical circuit called an accelerometer to sense changes in momentum. When the driver presses the brake pedal, the brake controller applies power to the trailer brakes in proportion to the vehicle's momentum.

Proportional brake controllers provide smooth stops and efficient braking. This is especially apparent when braking on a hill. If traveling up a hill, the controller applies less power, and if traveling down, it applies more power.

Proportional Brake Controller Automatic Adjustment

Find a Brake Controller

How to Adjust Trailer Brake Controller: 6 Steps

Step 1: Plug in the Trailer Wiring Harness

With your trailer coupled to your vehicle, the first step when towing with a brake controller is to make sure the trailer wiring harness is plugged into your vehicle. A brake controller requires power from the vehicle and a connection to the trailer brakes for proper towing.

During setup, make sure your vehicle and trailer are parked on a level surface. Also, make sure you are in a safe, open area with plenty of stopping distance and no other traffic around.

Step 2: Allow the Brake Controller to Calibrate

With the trailer plugged in, the brake controller may need to be calibrated. Most brake controllers are self-calibrating. Others do not require calibration at all.

Typically, self-calibrating brake controllers will flash a light or signal to indicate when the unit is calibrating and when calibration is complete.

Step 3: Select Personal Settings

Some brake controllers come with personal settings that can be adjusted to your preference, such as the angle of the interface, the brightness of the screen and even the location of the brake controller itself.

Be sure to adjust all of these settings before driving.

Step 4: Set the Maximum Output

Maximum output is the maximum amount of power the brake controller will apply to the trailer brakes. You will need to set this level and adjust it depending on the load size.

To adjust your brake controller output, press and hold the vehicle brake pedal. Set the output to the starting value specified in the instructions.

Then, in an open area, test the trailer brakes by driving forward at about 25 mph and applying the brakes. If the vehicle stops too slowly, increase the maximum output. If it stops too abruptly or locks up, reduce the output.

Step 5: Adjust the Sensitivity Level

Sensitivity is how aggressively your brake controller will apply the brakes. You can set sensitivity by testing the trailer brakes again.

Drive forward at about 25 mph and press the brake pedal. If the vehicle stops too slowly, increase the sensitivity setting. If it stops too abruptly, lower the sensitivity.

As operation becomes more comfortable, you can test braking at various speeds to ensure smooth stops in any conditions.

Step 6: Manually Activate Brakes as Needed

Most trailer brake controllers come with a manual activation button. This allows you to activate the trailer brakes whenever desired, without applying the vehicle brakes.

Manual trailer brake activation can be useful for correcting minor trailer sway and gradually slowing down on a steep hill or before stops.

Want to use your smartphone as a brake controller? Check out Echo®

Shop Brake Controllers

How to Use a Proportional Brake Controller Video

Do I Need a Trailer Brake Controller?

If you're asking yourself: Do electric trailer brakes work without a controller? The answer is, no. Electric trailer brakes do not work without a brake controller. If your trailer is equipped with electric brakes, you will need a brake controller to tow.

However, some trailers are equipped with surge brakes. These are a hydraulic braking system that uses the trailer's own weight and momentum to actuate the brakes. Unlike electric trailer brakes, they do not require a brake controller or even an electrical connection to the vehicle.

Need help adjusting your trailer brakes?

Towing Tip!

If you have a trailer shop adjust your brakes, have them lubricate your wheel bearings, check your wheel nuts and inspect your tires and valve stems at the same time.

FAQs

How does a trailer brake controller work?

A trailer brake controller uses electricity from the tow vehicle to apply a specific amount of power to the trailer brakes. It uses electrical circuits and trailer gain settings to regulate the amount of braking power. Some brake controllers have circuits that respond to the vehicle's momentum while towing. Others apply power on a fixed increasing scale and level off at a maximum output, based on parameters set by the driver.

How to Adjust Trailer Brake Controller

With your trailer coupled to your vehicle, the first step when towing with a brake controller is to make sure the trailer wiring harness is plugged into your vehicle.

Note: During setup, make sure your vehicle and trailer are parked on a level surface. Also, make sure you are in a safe, open area with plenty of stopping distance and no other traffic around.

The next step is allowing the brake controller to calibrate. With the trailer plugged in, the brake controller may need to be calibrated. Most brake controllers are self-calibrating. Others do not require calibration at all. Next, you should select and adjust personal settings, such as angle of the interface, brightness of the screen, etc. before driving. The next thing you should do is set the maximum output. To do so, press and hold the vehicle brake pedal. Set the output to the starting value specified in the instructions. Then, in an open area, test the trailer brakes by driving forward at about 25 mph and applying the brakes. If the vehicle stops too slowly, increase the maximum output. If it stops too abruptly or locks up, reduce the output.

The following step is to adjust the sensitivity level. You can do so by driving forward at about 25 mph and pressing the brake pedal. If the vehicle stops too slowly, increase the sensitivity setting. If it stops too abruptly, lower the sensitivity. The final step for adjusting the brake controller is to manually activate the brakes as needed. Most trailer brake controllers come with a manual activation button. This allows you to activate the trailer brakes whenever desired, without applying the vehicle brakes.

How do you calibrate a trailer brake controller?

To calibrate a brake controller, make sure the vehicle is parked on a level surface. Then, plug your trailer into your tow vehicle. The brake controller will then calibrate. Most brake controllers are self-calibrating. After calibration, some adjustment may be required to best fit the vehicle, trailer and load size.

What is the best setting for trailer brake controller?

The best setting for a brake controller is one that will match the trailer and load size. Begin by selecting the gain level and sensitivity recommended by the manufacturer. Then, test the brake controller and brakes. If more gain or sensitivity is needed, adjust accordingly.

What is trailer gain?

Trailer gain is the amount of power a brake controller applies to the trailer brakes. It is equal to the maximum amount of stopping force for the trailer. As the vehicle brake pedal is applied, the gain tells the brake controller how much electrical power to apply to the trailer brake electromagnets.

What should my trailer gain be set at?

Trailer gain should be set based on the trailer and load size. For larger trailers, use a higher gain setting. For smaller trailers, a lower gain setting should be used to avoid brake lockup.

How to set trailer brake gain

To set trailer brake gain, start with the values specified by the manufacturer. Test your trailer brakes at 25mph. If the vehicle stops slowly, increase the trailer brake gain. If the brakes lock up, decrease the gain.

Towing 101 Table of Contents

Chapter 1: Intro - Where do I start?Chapter 2: What do I need for towing?Chapter 3: What types of hitches are there?Chapter 4: What's my towing capacity?Chapter 5: How do I select a hitch?Chapter 6: How do I install a hitch?Chapter 7: How do I install trailer wiring?Chapter 8: How do I use a brake controller?Chapter 9: How do I hook up my trailer?Chapter 10: What do I need to dinghy tow?

Looking for more?

Discover more great tips and how-tos on the Lippert blog -- your destination for all things RVing, towing, boating and beyond!