How To Use Infusible Ink Pens With The Cricut Mug Press

Instructions

Designing a Mug Project for Infusible Ink Pens

Open the Drawn Mug template in Cricut Design space and choose your mug size. Insert any imagery or text you wish to appear on the mug.

Be sure to select the image and choose "draw" with pen, not "cut" under Operation in the top toolbar. Your Cricut will know to use the pen function instead of the cutting function for your project.

Hide or delete the guidelines, then select all the images and in your project along with the template. Click "Attach" in the bottom right hand corner. This ensures that the images will be places where you desire and the wrap template positioned correctly.

Cutting your Infusible Ink Pen Design

Nothing complicated here...just be sure to have your Infusible Ink pen loaded in the machine (or ready to swap out) and MIRROR the image before you send it to cut and press that blinking C. Peel the wrapper off the mat when you're done.

if you've got an image like the one here, you'll see a little space between the two lines. Spend a few minutes filling that in by hand. While you could use the Infusible Ink sheets for an image like this, I find it a little more difficult to work with than I'd like when the lines are so thin. Also, I otherwise have a pack of pens sitting here going to waste!

Preparing the Mug for the Cricut Mug Press

Prepping the mugs using the Infusible Ink Pens has a few more steps than the Infusible Ink Sheet mug project, but it's not hard!

First, turn on your Mug Press. I discovered it took me about as long to do all the prep work with wrapping up the mug as it did for the Cricut Mug Press to heat up.

Prepare yourself three rectangular sheets of butcher paper that fit around the mug. I haven't been bothering to actually cut three sheets, rather, I make an accordion fold with three layers to save a bit of time. Make sure your paper is at least 11" wide. These sheets will protect your mug press from any errant ink that bleeds through in the transfer. They aren't reusable--I did try once and ended up with some ghost images from my last project.

Take the wrapper that has your drawn transfer on it and wrap it around the the mug with the tabs starting and ending by the handle. Put a piece of heat resistant tape on it to secure. I also like to tape the paper to the top of the mug to keep the image from shifting around and to make sure the top of the image gets a full transfer. You DO want to use heat resistant tape here; anything else is going to melt and ruin your project and/or Mug Press.

Now wrap the three layers of butcher paper around your mug, securing with more heat resistant tape. You don't need to do any taping of the top this time.

Put your Mug in the Mug Press

Once the green light appears on the Mug Press, you're ready to put the mug in! Slide it gently between the heat plates then press down the lever on top. When it beeps, it's done. Nothing more to think about!

VERY IMPORTANT: Take your mug out of the heat press and put it on a heat-safe pad or a few towels, as it will be blazing hot.

ALSO VERY IMPORTANT: You're desperately going to want to tear off all that wrapping and see how your project came out. Restrain yourself. Let it cool completely--first, to save yourself a few second degree burns and more that you want to let all the ink to settle down in place in its most vibrant place.

Once completely cool, unwrap your project and gaze in amazement at your pro-level project!