I2c LCD Arduino Tutorial And Example Code

Home » Arduino Liquidcrystal_i2c Tutorial » I2c LCD Arduino Tutorial And Example Code

Maybe your like

English Español
  • Home
  • Tutorials
  • Q&A forum
  • Electronics
  • 3D printing
  • About
  • About me
  • History
  • Let's learn
  • Contact us
  • Arduino tutorials
  • Circuits tutorials
  • Robotics tutorials
  • Q&A
  • Blog
  • Arduino
  • Circuits
  • Robotics
  • Modules
  • Gadgets
  • Printers
  • Materials
  • 3D objects
  • 3D edit
  • Donate
  • Reviews
  • Advertising
PCBWAY PCB service PCBWAY PCB service PCBONLINE PCB service i2c comunication with an LCD What do we need?

All the prices are low due to China purchase. It's up to you wait or not. 1. One Arduino NANo or pro mini (small size) (2€-3€) LINK eBay 2. One i2c module (1€-2€) LINK eBay 3. One LCD 16x2 module (2€-3€) LINK eBay 4. Serial TTL/FTDI FT232RL module (Just in an Arduino pro mini case) (2€-3€) LINK eBay 5. 9V battery (2€) 6. Wires, conectors, solder, soldering iron... (0€)

Intro!

Since the use of an LCD requires many microcontroller pins, we will reduce that number using serial communication, which is basically sending "packages" of data one after another, using only two pins of our microcontroller , pins SDA and SCL which are the analog pins A4 and A5 of the Arduino NANO or pro mini.

Schematic! Connections!

First of all we connect i2c pins module as shown in the schematic. Power the LCD module to 5 volts and connect the ground as well. The SDA pin of the i2c module conected to arduinio A5 and the SCL pin to A4. We connect the arduino to USB and we are ready to program. In order to make the LCD work we need to inport the LCD library for arduino.

You can download the LiquidCrystal library here: To install it we just go to Program -> inport library and we open the .zip file that we've just downloaded. Code!

/* http://www.electronoobs.com */ /*-----( Inport library )-----*/ #include <Wire.h> #include <LiquidCrystal_I2C.h> //i2c pins LiquidCrystal_I2C lcd(0x27, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE); // void setup() { //WE define our LCD 16 columns and 2 rows lcd.begin(16,2); lcd.backlight();//Power on the back light //lcd.backlight(); Power off the back light } void loop() { //Write your text: lcd.setCursor(0,0); //we start writing from the first row first column lcd.print(" ELECTRONOOBS"); //16 characters poer line delay(1000);//Delay used to give a dinamic effect lcd.setCursor(0,1); lcd.print("Thanks, share"); delay(8000); lcd.clear();//Clean the screen lcd.setCursor(0,0); lcd.print(" How r U?"); lcd.setCursor(0,1); lcd.print(" ELECTRONOOBS"); delay(8000); }

See other tutorial here:

TUTORIALS

Arduino Circuits Robotics Arduino Course Blogs

SUPPORT

Terms and Conditions Privacy Policy Contact me Forum

ADVERTISERS

Donate Reviews Advertising ELECTRONOOBS Copyright ©2023, All rights reserved | Terms and Conditions | Privacy Policy

Tag » Arduino Liquidcrystal_i2c Tutorial