Interfacing MAX6675 Thermocouple Module With Arduino

Home » Arduino Multiple K Type Thermocouple » Interfacing MAX6675 Thermocouple Module With Arduino

Maybe your like

Contents

  • Sensors
Interfacing MAX6675 Thermocouple Module with Arduino

Overview

Are you looking for a reliable temperature sensor? The MAX6675 Thermocouple Module is just what you need. With its exceptional features and seamless integration with Arduino, this module is perfect for measuring temperature accurately. In this article, we will explain the key features of the MAX6675 Thermocouple Module, provide step-by-step instructions for Arduino interfacing, and offer helpful tips for successful installation.

MAX6675 Thermocouple Module Features

This module is a temperature sensor with a resolution of 0.25°C that can measure temperature from -20°C to +80°C. This module includes a Type K thermocouple, a driver and a MAX6675 amplifier. The MAX6675 output is 3 signals with SPI communication protocol to report the measured temperature.

This thermocouple module is designed with user convenience in mind. Its straightforward setup and operation make it suitable for beginners and experts alike. Additionally, it can handle high-temperature environments, allowing for versatile applications in industries such as manufacturing, research, and more.

MAX6675 K Type Thermocouple Module

You can download the datasheet of this module here.  

Icon

MAX6675 K Type Thermocouple Module Datasheet

1 file(s) 130.05 KB Download

MAX6675 Thermocouple Module Pinout

This sensor has 7 pins:

  • VCC: Module power supply 3 to 5.5 V
  • GND: Ground
  • SCK: Clock pin
  • CS: Chip Select
  • SO: Serial output
  • TH-: Negative side input
  • TH+: Positive side input

You can see the pinout of this module in the image below.

MAX6675 K Type Module Pinout

Required Materials

Hardware Components

Arduino UNO R3 × 1
MAX6675 Thermocouple × 1
Male to Male jumper wire × 1

Software Apps

Arduino IDE

Interfacing MAX6675 Thermocouple Module with Arduino

To integrate the MAX6675 Thermocouple Module with Arduino, follow these simple steps:

Step 1: Circuit

Create the circuit by connecting the Arduino to the MAX6675 Thermocouple module. Ensure the wires are connected properly according to the provided pinout.

MAX6675 Module Arduino circuit

Step 2: Library Installation

Go to Library manager in Arduino, search for the MAX6675 library, and install it. This library is essential for utilizing the module’s features effectively.

Tip

If you need more help with installing a library on Arduino, read this tutorial: How to Install an Arduino Library

Step 3: Code

Upload the following code to your Arduino:

/* MAX6675-K-Type-Thermocouple Modified on 31 oct 2020 by Amir Mohammad Shojaee @ Electropeak
Home
based on MAX6675 Arduino Library Examples */ #include "max6675.h" // max6675.h file is part of the library that you should download from Robojax.com int soPin = 4;// SO=Serial Out int csPin = 5;// CS = chip select CS pin int sckPin = 6;// SCK = Serial Clock pin MAX6675 Module(sckPin, csPin, soPin);// create instance object of MAX6675 void setup() { Serial.begin(9600);// initialize serial monitor with 9600 baud Serial.println("MAX6675"); } void loop() { // basic readout test, just print the current temp Serial.print("C = "); Serial.println(Module.readCelsius()); delay(1000); }

First, the MAX6675 library is inculded. Next, 3 output pins are defined and connected to pins 4, 5, and 6 of the Arduino. Finally, the temperature is displayed in degrees Celsius.

As you can see in the image below, first the thermocouple is in the open space and shows the ambient temperature. Immediately immerse it in warm water. The Serial Monitor output measures the water temperature at approximately 70°C.

By following these instructions, you can harness the capabilities of the MAX6675 Thermocouple Module and integrate it into your Arduino projects. Enjoy accurate temperature measurements and unlock endless possibilities in various applications.

Don’t miss out on this exceptional temperature sensor. Get your MAX6675 Thermocouple Module today and experience accurate and reliable temperature measurements like never before!

Liked What You See?​ Get Updates And Learn From The Best​ Subscribe

Comments (12)

  • faramarz Reply

    thanks bro… mamnun dadash kheyli be dard khord its so useful…

    October 4, 2021 at 11:46 pm
    • Mehran Maleki Reply

      You’re quite welcome!:)

      October 6, 2021 at 5:33 am
  • vinay Reply

    hello, great work, It is very useful for beginners. but I have 5 temperature sensors I am not getting how to read all.

    February 2, 2022 at 10:16 am
    • Mehran Maleki Reply

      Hi. You’re quite welcome! You can use the same process explained in this tutorial. As you can see in the circuit, you need 3 pins for each MAX6675, so, you need 15 pins for your 5 sensors which are available in an Arduino Uno board -You can use digital pins 0-13 and also analog pins A0-A5 for this purpose-. Then, you can easily define them in your code and read the output of your sensors.

      February 5, 2022 at 5:56 am
      • dan Reply

        Hi. I think you do not need 15 pins to connect 5 sensors. My count stops at 7 :-). You need to connect SO pins from all sensors to one arduino pin. Same for SCK. Only CS pin from each sensor needs to be connected to separate arduino pin.

        http://www.learningaboutelectronics.com/Articles/Multiple-SPI-devices-to-an-arduino-microcontroller.php

        May 13, 2022 at 2:15 pm
        • Mehran Maleki Reply

          Well, I guess you’re right! Only the CS pin needs to be unique for each sensor. Thank you for your attention!

          May 14, 2022 at 7:12 pm
  • phay ratanak Reply

    can we use it to collect data into graphic?

    June 17, 2022 at 1:34 am
    • Mehran Maleki Reply

      Hi, What do you mean by “collect data into graphic”? Actually, you can use it to collect data and you can almost anything you want with it.

      June 19, 2022 at 6:47 pm
  • Thierno Hamidou DIAW Reply

    j’ai des soucis pour un programme qui parle sur le niveau d’un détecteur de température connu sous le nom Thermocouple max6675. Mais en saisissant il me demande toujours d’utiliser un bibliothèque qui correspond à ce programme ,raison pour laquelle je voudrai l’installer.

    January 24, 2023 at 12:10 pm
    • Ali Abdolmaleki Reply

      Hi. please use the instruction in this link

      February 19, 2023 at 1:00 pm
  • Thierno Hmidou DIAW Reply

    j’ai un problème mon code, car il demande toujours d’installer un bibliothèque .

    January 24, 2023 at 12:31 pm
    • Ali Abdolmaleki Reply

      Salut vous devez donc installer la bibliothèque MAX6675 en 3 étapes Esquisse -> inclure la bibliothèque -> gérer la bibliothèque

      February 19, 2023 at 12:55 pm

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Comment *

Name *

Email *

Website

Save my name, email, and website in this browser for the next time I comment.

Δ

Be The First To Know Subscribe Subscribe to receive monthly life-changing updates

Tag » Arduino Multiple K Type Thermocouple