KonicaMinolta C554 Error Codes

Home » Codigo C0210 Konica Minolta » KonicaMinolta C554 Error Codes

Maybe your like

Search Error Codes
  • Manufacturers
    • Brother
    • Canon
    • Duplo
    • Epson
    • HP
    • KIP
    • Konica
    • Konica-Minolta
    • Kyocera
    • Lexmark
    • Mimaki
    • Minolta
    • Mutoh
    • OKI
    • Panasonic
    • Ricoh
    • Riso
    • Roland
    • Samsung
    • Sanyo
    • Sharp
    • Toshiba
    • Xerox
    • Zebra
  • Other Tools
    • Scan To Email Tester
    • Auto Installer
  • Contact
  • Go Back

KonicaMinolta C554 Error Codes

List Of Machines Search All Codes

Konica-Minolta C554 Error Code C0210

Error Code: C0210
Description: LCT lift failure • The main tray upper limit sensor (PS136) is not blocked even after the set period of time has elapsed after the paper lift-up operation for the drawer began. • The shifter stop / lower limit position sensor (PS138) is not
Remedy: 1 Check the connector between M134-PCCB CN10 for proper connection and correct as necessary. 2 Check the connector of M134 for proper drive coupling and correct as necessary. 3 Check the connector between PS136-relay CN1- PCCB CN4 for proper conn
Previous Page 1 9 10 11 226 Next❯

Konica-Minolta C554 Top Searches

These results are ranked by popularity.

Error
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after starting the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2563Description: Yellow TCR sensor failure TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
CDF51, CDF71, CDFA1Description: ASIC image version failure (back side) ASIC image access failure (back side) ASIC image error (back side). Communication error is detected between the MFP board (MFPB) and the dual scan image processing board (DSIPB).
C1197Description: Tri-folding guide motor’s malfunction The tri-folding gate home sensor (PS11) is not blocked or unblocked even after the set period of time has elapsed while the tri-folding guide motor (M6) is energized.
CC170...CC186Description: Dynamic link error during starting (AP0) Dynamic link error during starting (AP1) Dynamic link error during starting (AP2) Dynamic link error during starting (AP3) Dynamic link error during starting (AP4) Dynamic link error during starting (

Konica-Minolta C554 Common Errors

The most common error codes.

Error
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after starting the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2563Description: Yellow TCR sensor failure TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
CDF51, CDF71, CDFA1Description: ASIC image version failure (back side) ASIC image access failure (back side) ASIC image error (back side). Communication error is detected between the MFP board (MFPB) and the dual scan image processing board (DSIPB).
C1197Description: Tri-folding guide motor’s malfunction The tri-folding gate home sensor (PS11) is not blocked or unblocked even after the set period of time has elapsed while the tri-folding guide motor (M6) is energized.
CC170...CC186Description: Dynamic link error during starting (AP0) Dynamic link error during starting (AP1) Dynamic link error during starting (AP2) Dynamic link error during starting (AP3) Dynamic link error during starting (AP4) Dynamic link error during starting (
C4501Description: Laser malfunction • SOS signal is not detected even after the lapse of a given period of time after starting the laser output. • SOS signal is not detected for a given period of time during printing or IDC sensor adjustment.
C2563Description: Yellow TCR sensor failure TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
CDF51, CDF71, CDFA1Description: ASIC image version failure (back side) ASIC image access failure (back side) ASIC image error (back side). Communication error is detected between the MFP board (MFPB) and the dual scan image processing board (DSIPB).
C1197Description: Tri-folding guide motor’s malfunction The tri-folding gate home sensor (PS11) is not blocked or unblocked even after the set period of time has elapsed while the tri-folding guide motor (M6) is energized.
CC170...CC186Description: Dynamic link error during starting (AP0) Dynamic link error during starting (AP1) Dynamic link error during starting (AP2) Dynamic link error during starting (AP3) Dynamic link error during starting (AP4) Dynamic link error during starting (

Tag » Codigo C0210 Konica Minolta