LED Blinking Red In Trend Micro Home Network Security Station

You’re offline. This is a read only version of the page. Looking for business support?

• Support
• TMKA-19627

Print Trend Micro Home Network Security is flashing red Views:

You notice the LED light of your Home Network Security Station keeps blinking red if you have Version 1 , and white if you have Version 2.

Why did this happen?

Your Home Network Security Station is either initializing or performing an update.

What should I do next?

Check the condition of your Home Network Security Station

Analyze if your Trend Micro Home Network Security Station is in good physical condition.

1. Check if its physical components are intact.

   

   

2. Ensure it is turned ON:
   1. Connect the adapter to the outlet and the Station.
   2. Make sure power on the outlet is turned ON.
   3. Change outlets to ensure power is ON.
3. Make sure you have a stable Internet connection:
   1. Disconnect your Home Network Security from the router.
   2. Check if the Internet line is connected to the router's WAN port.
      1. If there is no Internet connection:
         • Reboot your router.
         • Check the network status from your Internet Service Provider.
         • Check your router settings.
      2. If you can connect to the Internet, reconnect your Home Network Security Station to the router.
4. Check the connection between the router and the Station:
   1. Use the Ethernet cable provided to connect the Home Network Security Station to any available LAN ports of your router.

   2. Check if the two LED lights of the LAN port are turned on. LED lights should look like this:

      

      • One port should be blinking green.
      • The other port should be steady green or yellow.
   3. If the LED lights do not light up as mentioned, move the Ethernet cable to another router LAN port. Once the LED lights become normal, your Home Network Security Station should be connected to the network.

Wait depending on the frequency of the LED light

Wait for the specified amount of time depending on the frequency of the LED.

• For SLOW blinking red light, wait for about an hour for the Station to perform the update.
• For FAST blinking red light, wait for about 5 minutes for the Station to initialize.

If the station LED is still blinking red after the specified time, contact Trend Micro Support for assistance.

Keywords: blinking red,red,Router is flashing red,blinking red Comments (0) Add a comment Name Email Comment ×

Modal header

One fine body…

Dismiss Save

• Home

LAST UPDATED: NOV 14, 2024

You notice the LED light of your Home Network Security Station keeps blinking red if you have Version 1 , and white if you have Version 2.

Why did this happen?

Your Home Network Security Station is either initializing or performing an update.

What should I do next?

Check the condition of your Home Network Security Station

Analyze if your Trend Micro Home Network Security Station is in good physical condition.

1. Check if its physical components are intact.

   

   

2. Ensure it is turned ON:
   1. Connect the adapter to the outlet and the Station.
   2. Make sure power on the outlet is turned ON.
   3. Change outlets to ensure power is ON.
3. Make sure you have a stable Internet connection:
   1. Disconnect your Home Network Security from the router.
   2. Check if the Internet line is connected to the router's WAN port.
      1. If there is no Internet connection:
         • Reboot your router.
         • Check the network status from your Internet Service Provider.
         • Check your router settings.
      2. If you can connect to the Internet, reconnect your Home Network Security Station to the router.
4. Check the connection between the router and the Station:
   1. Use the Ethernet cable provided to connect the Home Network Security Station to any available LAN ports of your router.

   2. Check if the two LED lights of the LAN port are turned on. LED lights should look like this:

      

      • One port should be blinking green.
      • The other port should be steady green or yellow.
   3. If the LED lights do not light up as mentioned, move the Ethernet cable to another router LAN port. Once the LED lights become normal, your Home Network Security Station should be connected to the network.

Wait depending on the frequency of the LED light

Wait for the specified amount of time depending on the frequency of the LED.

• For SLOW blinking red light, wait for about an hour for the Station to perform the update.
• For FAST blinking red light, wait for about 5 minutes for the Station to initialize.

If the station LED is still blinking red after the specified time, contact Trend Micro Support for assistance.

Was this article helpful?

thumb_up Yes thumb_down No

Thank you for your feedback!

Feedback entity isn't available at the moment. Try again later.

We’d love to hear your thoughts. Let us know what you think about this article. (You can choose more than one option.) I followed the steps, but it didn’t solve my problem. The information wasn’t accurate. It was confusing and hard to follow. I couldn’t find the information I needed. I’m not happy with the product or the issues I'm having. Others (Please specify below:)

• *This form is for feedback purposes only. If you have any questions, kindly chat with our Trend Companion.
• *Do not include any personal information.

Submit Feedback

STAY SAFE FROM SCAMS!

Get smarter protection from scam texts, spam calls, and deepfakes with Trend Micro ScamCheck. Scan the QR code to install it now.