Linksys Extender Setup

How to reset Linksys extender through the reset button?

Resetting Linksys extender has a lot easier with the help of two methods, that are, web interface and push button. If you want to reset Linksys extender through the web interface, then you can do that via the default web address. The default web address of a Linksys wifi extender is extender.linksys.com. You don’t have to be connected to the internet for Linksys extender reset.

Before you learn how to reset Linksys wifi extender, there are a few things that you need to know. Resetting Linksys extender brings your device back to the default factory settings. Default settings are the original settings of your Linksys wifi extender.

What is Linksys range extender reset?

Resetting the Linksys range extender brings your device back to the default factory settings. In other words, when you make your device restore the factory default settings, all the wireless connections, network logs, passwords, and other configured features get erased. Basically, the device gets back to the original settings with which it was supplied to you.

There are two ways through which you can learn how to reset Linksys range extender. You can easily reset Linksys range extender through the push button and web interface.

If you have been trying to learn how to reset Linksys extender, this is the easiest way to do it. Let us tell you how! All you have to do is just press the button. The button that will help you in resetting Linksys extender generally sits a little inside the frame of the extender.

It is impossible to press the button with your finger. You would require a toothpick or a paperclip to press the reset button of your Linksys extender. The instructions are given in the subsequent section that you need to follow in order to reset Linksys extender to the factory default settings.

Linksys Wifi extender reset

1. To reset Linksys extender to the factory default settings, first, you need to locate the reset button on your device.
2. Once you locate the device, take a toothpick or a pin in your hands.
3. Now, press the reset button of your Linksys extender.
4. Hold the reset button for at least 7 seconds.
5. Now, you will see the lights on your extender blinking.
6. At this time, you need to release the reset button of your wifi range extender.

After that, give your extender a few minutes to restore the factory default settings. It will take approximately 2 minutes for your device to get back to the original settings. You may need to reconfigure your range extender once it restarts. To configure the extender with your router’s network, make sure you refer to the setup instructions.

NOTE - Please make sure you do not turn off the device or unplug it from the power outlet whilst it is in the middle of the reset process. This may cause some permanent issues on your device that will require technical help to fix afterward.

Conclusion

So that was all about the Linksys extender reset instructions. It is super easy to reset Linksys extender to the factory default settings using the push/reset button. We hope you liked this post and it helped you learn how to reset Linksys Wifi extender. In case you encounter any errors or need further assistance, kindly reach out to our support team. Our technical support team of professional networking geeks brings years of expertise in resolving networking issues on various devices.