Minimum Distance Definition | Law Insider

Minimum distance definitionMinimum distance. ’ means the least in any direction whether vertical or horizontal from the outer surface of the nearest package.View SourceBased on 7 documents7Draft with AISplit ViewAI-Powered Contracts

Draft, Review & Redline at the Speed of AI

Get StartedSchedule a DemoMinimum distance means the distance worked out in accordance with clause 2;View SourceBased on 2 documents2Draft with AIMinimum distance. A minimum of 100 km per day of patrolling is required in every district.View SourceBased on 1 documents1Draft with AI

Examples of Minimum distance in a sentence

• Lithotripsy - procedure cum operating room (without need for anaesthesia) 24 ▇▇.▇▇ Minimum distance between centres of two ICU beds 3.5 mt.

• Minimum distance to the centerline of the nearest track shall be eleven feet (11') unless otherwise specifically agreed in writing by Railroad.

• Minimum distance of hydrant to wall or building shall be 3 feet for the hydrant operating wrench clearance.

• Minimum distance permitted between new skid trails will be 120 feet measured along the surface of the ground unless specifically waived in each case by the Sale Officer.

• Item Clearance at the gate Visual aid implications Taxiway on bridges ICAO SARPS and ADM Minimum distance between a/c and obstacle = 7.5m but special circumstances on nose-in stands may permit reduction a) between terminal (including fixed pax bridge) and a/c nose and b) over any portion of stand provided with azimuth guidance by a visual docking guidance system.

• Minimum distance between earth electrodes shall be two times the driven depth of the electrode.

• Minimum distance classification used the mean vectors of the spectral signatures obtained from the three training sets, and calculated the Euclidean distance from each unknown pixel to the mean vector for each of the three classes.

• Such orders should instructions on minimum C.P.A. (Closest Point of Approach) to be maintained, Minimum visibility at which the Master shall be called, Minimum distance from the land, or any other special instruction and / or requirement he may have.

• Others - REGISTER Partner/s ATERSA Author/s ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ PV ANALYSIS OF PRELIMINARY DESIGN General notes for every design: - Minimum distance between strings: 14 mm.

• These conditions are summarized in the following table: Maximum 50-year wind (average 10 minutes)* 38.5 m/s Maximum 50-year gust (average 5 s)* 57.4 m/s Maximum average annual speed 6.2 m/s Maximum intensity of turbulence 20% Minimum distance between WETs 5 rotor diameters in the main direction of the wind * at hub level Customer is responsible for ascertaining that the planned location of the WETs meets above parameters.

More Definitions of Minimum distance

Minimum distance means the required minimum horizontal distance between any wall of building (1) and the nearest wall of building (2) or the vertical prolongation of either.View SourceBased on 1 documents1Draft with AIMinimum distance means the required minimum horizontal distance between any wall of a building and the nearest area side or rear lot line of the development area.View SourceBased on 1 documents1Draft with AIMinimum distance means the distance from the motor vehicle’s rearmost axle to the trailer’s foremost axle.View SourceBased on 1 documents1Draft with AIMinimum distance. No monument sign shall be located within one hundred feet (100') of another monument or freestanding sign on the same side of the street, whether on the same parcel or on an adjacent parcel.View SourceBased on 1 documents1Draft with AI

Related to Minimum distance

• Minimum DSCR means, with respect to a Supplemental Loan, (i) if the Senior Indebtedness bears interest at a fixed rate, 1.25:1, or (ii) if the Senior Indebtedness bears interest at a floating rate, 1.10:1.

• Minimum Disbursement Amount means Twenty-Five Thousand and No/100 Dollars ($25,000).

• Minimum Level (ML) means the concentration at which the entire analytical system must give a recognizable signal and an acceptable calibration point. The ML is the concentration in a sample that is equivalent to the concentration of the lowest calibration standard analyzed by a specific analytical procedure, assuming that all the method-specified sample weights, volumes and processing steps have been followed.

• Minimum Term means the minimum initial period of service for each Service as shown on the Service Agreement and Order Schedule, such period to start on the date on which the relevant Service is first made available to you for use. For the avoidance of doubt, unless otherwise agreed the minimum term will be 12 months from your contract commencement date or other such date as may be notified to you in accordance with paragraph 19.2.

• total allowable catch (TAC) means:

Filter & Search

Definition: Minimum distanceContract TypeJurisdictionCountryInclude KeywordsExclude Keywords

Additional filters are available in search

Open Search

Related Definitions

• Minimum DSCR
• Minimum Disbursement Amount
• Minimum Level (ML)
• Minimum Term
• total allowable catch