Need To Reset Airbag Module On A 2011 Ford F350. Please Help

• MHH Auto™
• Guest
  • Hello There, Guest! Login Register
• Donate
• Rules
• Members
  • Forum Team
  • Online Members
  • Open Buddy List
• Posts
  • Mark All Forums Read

Welcome to world's most trustworthy automotive forum To obtain your registration code, please send an email to [email protected] MHH AUTO MHH AUTO FORUMS. Automotive Airbag, Dash, ECU, IMMO. 1 … 4705 4706 4707 4708 4709 4710 4711 4712 4713 4714 4715 4716 4717 4718 4719 4720 4721 4722 4723 4724 4725 4726 4727 4728 4729 … 6107 Need to reset airbag module on a 2011 Ford F350. Please help Need to reset airbag module on a 2011 Ford F350. Please help proedge Location OfflineJunior Member Reputation: 3 Thanks Given: 55 Thanks Received: 10 (8 Posts) Posts: 94 Threads: 10 Joined: Feb 2016 1 06-11-2017, 10:28 AM (This post was last modified: 06-11-2017, 10:29 AM by proedge.) bought a salvage title F350 with an airbag light on. I scanned the code, it's coming up as B0001 Driver Frontal Stage 1 Deployment Control: Circuit Short to Ground. I tried clearing the code, but it won't clear. I don't know if the airbag went off as a result of the accident or not. According to the seller, it did not. I'm not sure if there's a sensor somewhere that's unplugged or the module needs to be reset? I don't really want to spend $500 on a new module if I don't have to. I read that CARPROG could be used to reset the module? Not sure what I can do at this point. Please help me with any info you can. Thanks given by: Reply dingchavaz Location OfflineJunior Member Reputation: 16 Thanks Given: 204 Thanks Received: 66 (30 Posts) Posts: 129 Threads: 17 Joined: Jan 2012 2 06-11-2017, 07:07 PM this fault code means driver air bag 1 has a disconnection to the air bag. first check horn working? normally this can be broken wire in the steering wheel spiral cable or loose connector at steering wheel airbag. i think it can be the reason 2 after do the repair clear the fault code with ignition on and try here to share and care! Dont forget to rep+ and thanks! Thanks given by: hatemdiag Reply cougar89 Location OfflineJunior Member Reputation: 2 Thanks Given: 101 Thanks Received: 13 (9 Posts) Posts: 28 Threads: 0 Joined: Oct 2012 3 06-11-2017, 07:24 PM Hello, If the SRS module not showing crash event,then no need to reset it,just double check the Driver AirBag connection goodluck Thanks given by: Reply proedge Location OfflineJunior Member Reputation: 3 Thanks Given: 55 Thanks Received: 10 (8 Posts) Posts: 94 Threads: 10 Joined: Feb 2016 4 06-11-2017, 08:59 PM I took the driver side airbag off the wheel, unclipped and clipped all the connections back in. tried resetting the code, still comes back. After I start the truck the light goes off then comes back on a few seconds later. Looking at the code again, it says it has something to do with the deployment control. Would that have anything to do with a sensor in the bumper perhaps? Thanks given by: Reply proedge Location OfflineJunior Member Reputation: 3 Thanks Given: 55 Thanks Received: 10 (8 Posts) Posts: 94 Threads: 10 Joined: Feb 2016 5 06-13-2017, 02:35 AM well i ordered a Ford IDS system, should hopefully get it from China this week. Once I figure out the problem, I'll post the solution for others to use if anyone else runs into this issue Thanks given by: Reply proedge Location OfflineJunior Member Reputation: 3 Thanks Given: 55 Thanks Received: 10 (8 Posts) Posts: 94 Threads: 10 Joined: Feb 2016 6 06-19-2017, 01:35 AM (This post was last modified: 06-19-2017, 01:36 AM by proedge.) Ok I finally got the VCM II working. I followed the airbag trouble shooting guide from Ford. It says to read the Deploy_00_R PID, it's supposed to read between 2 and 3.68 Ohms. Mine shows 65.35 ohms, so it looks like it's an open circuit. I read the error code again and it's actually B0001:13, which is an open circuit code. I'm starting to think that it could Be an issue with the clock spring. I've noticed that the steering wheel buttons don't respond as they should sometimes. I've read on other forums that a failing clockspring would typically cause that. Is there any way for me to confirm the clockspring failure before replacing it? The Ford guide talks about testing the connectors at the RCM module, but it's buried under the center console and the carpet, I don't want to have to take half the truck apart to get to It. Thanks given by: Reply

Possibly Related Threads…

I need crash reset for multipla 51759726 Author: carmineck Replies: 0 Views: 13 Last Post by carmineck 7 hours ago Renault Rlink2 LANR16 need virgin/reset antitheft protection Author: jdmservice Replies: 3 Views: 460 Last Post by lordfrederiks 10 hours ago Audi q7 airbag module 4m0959655e adaptation procedure Author: trumnica Replies: 3 Views: 110 Last Post by trumnica Yesterday, 12:30 AM Users browsing this thread: 1 Guest(s)

Useful Links

• Lite (Archive) Mode
• RSS Syndication