No Display - How To Reseat RAM - Godmode

Home » How To Reseat Ram Pc » No Display - How To Reseat RAM - Godmode

Maybe your like

If you've plugged your Monitor into the correct output on your Graphics card and still aren't receiving signal to your Monitor it's quite likely that reseating the RAM will solve the issue.You might wonder, but this is a new computer or I've never touched the inside of this computer before, how could it be unseated. Sometimes during shipping, although rare, some jolt could have unlocked the memory causing it to slip out of place, or it may have loosened it and over time the natural tension of the RAM sticks eventually allowed it to pop out of place.If you'd rather just watch a video that explains the whole process you can follow the steps in this video instead. How to reseat RAM

Before touching any of the components inside the PC, it's important to cycle the power out of your system. To do this you will first need to remove the power cable then press the power button on top several times to ensure there is no power left in the PC.Once that's done, you can remove the glass side panel and freely touch the components.

 See below for an example of what proper seating looks like.No Display - How to reseat RAM

 

 

maintenance-18.jpg

 

 

To REMOVE a RAM stick:

Follow the steps below to properly remove a RAM stick.

  1. Press the side clips down.
  2. The RAM will be unlocked and can be pulled directly out.(Be careful to pull it out straight and parallel to the slot to avoid damage)

 

 

 

carnage_rmdimm-450.png

 

To INSTALL a RAM Stick:

Follow the steps below to properly install a RAM stick.

  1. Press the slide clips down to ensure they are in the open position
  2. Align the notch (dotted line) on the RAM stick to the slot and gently push down firmly on both ends of the memory stick until the clip closes up vertically to ensure that it is properly locked in place.

carnage_isdimm-450.png

 

How to individually test each RAM stick

In some cases, if you've installed all the RAM and you are still having issues, the culprit could be one specific memory stick that is causing no signal on the Monitor. To potentially help identify if a single RAM stick is having issues, you can check to see if there's a signal to the Monitor with only a single RAM stick at a time.If you're still having issues after reseating the RAM then you can also try to reseat your GPU instead, to do this please follow the steps in this video.If you're still seeing no signal after trying all of the above you can contact me directly at [email protected]

Tag » How To Reseat Ram Pc