Origami Fish For Kids - Easy Crafts For Kids

Instructions

Step 1:

Take a piece of square paper.

Step 2:

Without folding the entire paper in half, mark the paper with creases on 2 open sides (horizontal fold as below)

Step 3:

Now, make the half fold crease points vertically to make it look like 4 squares.

Step 4:

Take any one side and fold it along the half crease (use the half-crease side points as guide) of the square paper, as in the origami picture below.

Step 5:

Fold the other side along the half crease or simply align its edge with the folded part’s edge.

Step 6:

Unfold the last 2 folds and your piece of paper should be evenly divided into 4 horizontal lines.

Step 7:

Similarly, fold and unfold the 2 sides of the intact sides. These creases will leave 12 even square grids around the border of the square sheet as shown.

Step 8:

Join any 2 diagonally opposite corners of the square sheet, without making a fine folding line. Create creases inside the corner grids only.

Step 9:

Unfold the paper.

Step 10:

Similarly, create creases along the 2 other corner grids.

Step 11:

Fold any 2 sides of the paper and align them along the half crease of the square sheet like in the picture below.

Step 12:

Keeping ¾ of the folded paper flattened; open any one side (only the outer grid parts).

Step 13:

Fold along the diagonal creases of the corner grids.

Step 14:

Flatten the corner grids with the rest of the pattern by folding them along the diagonal creases.

Step 15:

Similarly, fold the other side of the pattern. The pattern now has 4 flaps. Consider the flaps that are separated along the middle as group.

Step 16:

Fold out any 2 flaps outside.

Step 17:

Now, align the right side of the remaining right flap along the inner edge of the right top flap (the previously folded out flap).

Step 18:

Now, fold the right flap in half and fold it outside. This is half of the tail fin.

Step 19:

Similarly, fold the left flap and your fish origami should look as below.

Step 20:

Fold the top-right side to 45 degree and align it along the middle of the pattern. This does sound complicated but look at the image below to make sure you have completed this correctly.

Step 21:

Similarly, fold and align the left side.

Step 22:

Turn the pattern to the other side. Draw and cut out an eye from a white paper.

Attach the eye on the square part of the origami fish pattern to complete the craft.