Page: Brew Guide - Chemex - Stumptown Coffee

Maybe your like

Skip to content Accessibility Statement

Free shipping on all orders over $45

Save 15% on your first 5 subscription shipments with code 15OFF5

Free shipping on all orders over $45

Save 15% on your first 5 subscription shipments with code 15OFF5

Toggle autoplay Chemex

How to Brew Using a Chemex Coffee Brewer

The Chemex Brewer, an iconic design invented in 1941 and housed in the MOMA permanent design collection, is as beautiful as it is functional. Easy to use and effortless on the eyes, it brews a clean cup while preserving body and balanced floral notes. This guide will show you how to get the most from your Chemex

Let's Get Brewing

Brew Time About 4 Minutes.

What You Need

8-cup Chemex

Chemex Filters

Grinder

42g (6 Tablespoons) of Stumptown coffee

Hot water just off the boil (about 205°F)

Scale

Timer

Stumptown Diner Mug

Brewing Instructions

Simple guidance for a great cup.

Brew Along With Us

Follow along step by step and see how it comes together.

Prep and preheat

Fill your kettle with filtered water and heat to just off-the-boil. Place a Chemex filter in the brewer with a single sheet away from the spout and multiple sheets lined up against the spout. Rinse the filter with hot water. This preheats the brewer and gets rid of any papery flavor from the filter. Discard the rinse water.

Weigh and grind coffee

Measure out 42g (about 6 Tablespoons) of your favorite Stumptown coffee and grind it medium-coarse like Kosher salt. Add the coffee to the filter, shaking it gently to level the grounds. Zero your scale if using.

Saturate grounds

Start a count-up timer when you add the hot water. Pour 150g of water or until all the grounds are saturated and allow it to bloom. Stir to make sure there are no dry grounds.

Add more water

At 0:45, start the second pour, making sure to reintegrate the coffee and water. Pour with a wiggling motion, then a gentle spiral up to 450g of water or until the volume reaches close to the top of the rim. Pour over the dark spots and avoid the light ones.

Fill to the top

At 1:45, pour water to 700g or until the slurry is roughly flush to the top of the Chemex.

Wait for it to brew

At 4:00, you should be pretty close to your target volume. Look for the glass bubble on the side of the brewer, which indicates 20 ounces. Carefully lift the filter. It’s okay to hover for a couple of seconds to make sure you have enough volume. Then pull the filter out completely and let it drain into the sink.

Serve and enjoy

Swirl the Chemex around a little and serve!