Paint Correction — Northeast Auto Salon

Home Paint Correction Xpel Paint Protection CQuartz ceramic coatings NEW VEHICLE SERVICES accessories Portfolio Scroll Paint correction

Automotive Surface Refinishing and Refinement.

Our paint correction process

1. MULTI-STEP HAND WASH

• Pre-rinse to remove heavy debris and road grime.

• Pre-foam and let sit to loosen bonded contamination.

• Wheels, tires and fender wells safety degreased and cleaned with various wheel brushes.

• Engine bay thoroughly degreased and clean. Steam cleaning if necessary.

• Door jams, trunk jams, fuel fill area cleaned.

• Two bucket hand wash using premium microfiber wash mitt for a swirl free finish.

2. PAINT DECONTAMINATION

• Paint, glass and wheels are soaked with IronX to remove embedded iron.

• Clay bar is used to remove bonded contamination from paint, glass and lenses.

3. SURFACE PREPARATION AND INSPECTION

• Water is blown dry with heated air and soft microfiber towels

• Surface is wiped down with isopropal alcohol to remove claying lubricate, waxes and sealants to exposed bare paint.

• Vehicle is inspected thoroughly under our specialized paint refinement room using various LED lights.

• Rubber trim, emblems, vents etc are masked off to prevent damage and debris from polishing.

• Paint is measured using a paint depth gauge.

4. SURFACE REFINISHING AND REFINEMENT.

• Paintwork is corrected through one of our level of correction service.

5. FINAL PROCESS

• We apply a silica(Si02) paint sealant lasting up to 4-6 months.

• Wheels wiped and protected with a Silica sealant.

• Window cleaned interior/exterior.

• Door jams wiped and protected.

• Tires protected with a water-based, none sling solution.

• Final walk-around with our inspection light to ensure quality service.

level 1 paint correction

Cost: $400 - extra for larger vehicles

This is for those who are looking to restore gloss and remove light swirl marks and hazing. This service is a good entry level correction over the entire paintwork. After the correction process is carried out we apply a Silica(Si02) sealant that will last 4-6 months depending on storage, mileage driven and weather.

level 2 paint correction

Cost: $600 - Extra for larger vehicles

One of our most popular correction service. 2 steps of correcting to remove heavier defects that our level 1 service can't remove. Recommended for vehicles with moderate swirl marks, light wash scratches, micro marring, holograms and light water etching. After the correction process is carried out we apply a wax or sealant that will last 4-6 months depending on storage, mileage driven and weather.

Paired with C.Quartz C.Quartz Professional Ceramic Coating for $1299Add C.Quartz Finest Reserve Ceramic Coating for $1499

level 3 paint correction

Cost: $900 - Extra for larger vehicles

Paired with C.Quartz C.Quartz Professional Ceramic Coating for $1599Add C.Quartz Finest Reserve Ceramic Coating for $1499Ceramic coating recommend for this service

This service is for neglected vehicles. 2 - 3 stages of correction and spot wet sanding to remove all severe swirl marks, light to medium scratches, holograms and buffer trails and light water etching. In the end, you will be left with a perfectly scratch free finish with deep brilliant gloss. After the correction process is carried out, we recommend adding our CQuartz coating to lock in the results. This will also provide a harder layer of protection over the factory clear coat for scratch resistance and easier washing.

level 4 paint correction

Cost: Vehicle Evaluation Required.

Ceramic coating recommend for this service

If you’re looking for the ultimate paint correction we have to offer, this is it! This service includes up to 7 stages of paintwork correction including wet sanding (color sanding) to remove the texture in your vehicles paint, also known as "orange peel". After the correction process is carried out, we recommend adding our CQuartz coating to lock in the results. This will also provide a harder layer of protection over the factory clear coat for scratch resistance and easier washing.

what is paint correction

Paint correction is a process that removes a safe amount of clear coat or paint through mechanical abrasion using various types of machine polishers. In most cases, scratches, swirl marks, buffer marks, micro-marring, cob webbing and hologram effects can be totally removed from all types of paintwork, including scratch-resistant ceramic clear coats. We do not use any fillers or glazes in our paint correction services. All imperfections are permanently removed safely.

View fullsize View fullsize View fullsize View fullsize

Paint Correction New Page What is Paint Correction New Page