ROLLING MACHINE INSTRUCTIONS - How To Roll Your Own

Time needed: 2 minutes

These instructions detail how to use a joint roller. They apply to the Raw Rolling Machine, the Zig Zag Joint Rolling Machine, Juicy Jay’s Jumbo Blunt Rolling Machine, or any other roller of similar design. There are just a few easy steps to follow and you’ll be rolling your own, lickity split…

  1. INSERT FILTER

    Roll up a small strip of heavy paper to use as a filter (like an index card). Open up the rollers, drop in the filter, and slide it to one side. This step is optional, but smoking with a filter is so much nicer, you should do it!Step 1: Insert filter into rolling machine

  2. LOAD MATERIAL

    Put in a big pinch of whatever you’re smoking. You might want to do this over a sheet of paper or a magazine, there could be some spilage.Step 2: Load material into joint roller

  3. ROLL

    Close the rollers back up. Pick up the joint roller and turn both rollers toward you. Use your fingers to keep the plastic taut around the inside so that the material inside gets nice and tight.Step 3: Roll the rollers toward you.

  4. INSERT PAPER

    Insert a sheet of rolling paper between the rollers, with the gummed side facing up and towards you. It might require a little shimmying. Don’t be scared.Step 4: Insert paper.

  5. ROLL AGAIN

    Roll the paper in by continuing to roll the rollers towards you. Stop before rolling it all the way in – you’ll want to leave a little sticking out so that you can lick it.Step 5: Roll again, leaving a little bit of paper hanging out.

  6. SEAL AND FINISH

    Lick the paper, then roll it in the rest of the way, giving it a few more rolls.Now open er up, and BOOM! You just rolled yourself a joint! Step 6: Seal your joint by licking the gummed strip of rolling paper sticking out of the top.

  7. SMOKE IT!

    Congrats, you did it! You earned one joint, now smoke it.You can roll the perfect joint with this rolling machine.

Tag » How To Use Joint Roller