Scrubbers - Air Pollution Control - Britannica

Electrostatic precipitators

Electrostatic precipitation is a commonly used method for removing fine particulates from airstreams. In an electrostatic precipitator, particles suspended in the airstream are given an electric charge as they enter the unit and are then removed by the influence of an electric field. The precipitation unit comprises baffles for distributing airflow, discharge and collection electrodes, a dust clean-out system, and collection hoppers. A high voltage of direct current (DC), as much as 100,000 volts, is applied to the discharge electrodes to charge the particles, which then are attracted to oppositely charged collection electrodes, on which they become trapped.

In a typical unit the collection electrodes comprise a group of large rectangular metal plates suspended vertically and parallel to each other inside a boxlike structure. There are often hundreds of plates having a combined surface area of tens of thousands of square metres. Rows of discharge electrode wires hang between the collection plates. The wires are given a negative electric charge, whereas the plates are grounded and thus become positively charged.

Particles that stick to the collection plates are removed periodically when the plates are shaken, or “rapped.” Rapping is a mechanical technique for separating the trapped particles from the plates, which typically become covered with a 6-mm (0.2-inch) layer of dust. Rappers are either of the impulse (single-blow) or vibrating type. The dislodged particles are collected in a hopper at the bottom of the unit and removed for disposal. An electrostatic precipitator can remove particulates as small as 1 μm with an efficiency exceeding 99 percent. The effectiveness of electrostatic precipitators in removing fly ash from the combustion gases of fossil-fuel furnaces accounts for their high frequency of use at power stations.