Sharp MX3100N Error Codes

Home » Code C4-00 Sharp » Sharp MX3100N Error Codes

Maybe your like

Search Error Codes
  • Manufacturers
    • Brother
    • Canon
    • Duplo
    • Epson
    • HP
    • KIP
    • Konica
    • Konica-Minolta
    • Kyocera
    • Lexmark
    • Mimaki
    • Minolta
    • Mutoh
    • OKI
    • Panasonic
    • Ricoh
    • Riso
    • Roland
    • Samsung
    • Sanyo
    • Sharp
    • Toshiba
    • Xerox
    • Zebra
  • Other Tools
    • Scan To Email Tester
    • Auto Installer
  • Contact
  • Go Back

Sharp MX3100N Error Codes

List Of Machines Search All Codes

Sharp MX3100N Error Code C4-00

Error Code: C4-00
Description: PTC trouble
Causes: The PTC unit is not properly installed. PTC unit trouble. Secondary transfer PWB trouble. PCU PWB trouble. Connector, harness connection trouble.
Remedy: Replace the PTC unit. Replace the secondary transfer PWB. Replace the PCU PWB. Check connection of the connector and the harness. NOTE: When the PTC unit is broken down and repair cannot be made because of no replacement part: To use the machine
Previous Page 1 10 11 12 154 Next❯

Sharp MX3100N Top Searches

These results are ranked by popularity.

Error
U2-00Description: MFP EEPROM read/write error
H3-00Description: Fusing section high temperature trouble (TH_UM)
F2-23Description: Discharge lamp trouble (C) A trouble is detected when the discharge lamp open sensor is open for 1 sec after turning ON the discharge lamp.
E7-55Description: PWB information sum error (Engine detection) PCU EEPROM PWB information sum error
L1-00Description: Scanner feed trouble

Sharp MX3100N Common Errors

The most common error codes.

Error
U2-00Description: MFP EEPROM read/write error
H3-00Description: Fusing section high temperature trouble (TH_UM)
F2-23Description: Discharge lamp trouble (C) A trouble is detected when the discharge lamp open sensor is open for 1 sec after turning ON the discharge lamp.
E7-55Description: PWB information sum error (Engine detection) PCU EEPROM PWB information sum error
L1-00Description: Scanner feed trouble
U2-00Description: MFP EEPROM read/write error
H3-00Description: Fusing section high temperature trouble (TH_UM)
F2-23Description: Discharge lamp trouble (C) A trouble is detected when the discharge lamp open sensor is open for 1 sec after turning ON the discharge lamp.
E7-55Description: PWB information sum error (Engine detection) PCU EEPROM PWB information sum error
L1-00Description: Scanner feed trouble

Tag » Code C4-00 Sharp