Shift Lights - MPS Racing

Shift Lights

MPS Featherweight Shift Lite

It features 4 super bright red LEDs for visibility in the daytime. This small, lightweight, low cost shift lite measures just 1.0” wide x 2.2” long x 1.94” high. The Featherweight Shift Lite is constructed of durable ABS plastic and weighs only 50 grams. It comes with Velcro to mount it to any flat surface. The mounting base has 2 mounting holes for screw down mounting also. Housings are available in Black, Blue, Red, Green, White, Yellow, Purple and Orange. Black are in stock, while colors may take an extra day or two.

Part Number	Description	Racer Price
1-0709	MPS Featherweight Shift Lite (please specify color)	$40.95

Daytona Sensors Shift Light and Data Logger

• Ultra high brightness red/green/blue LED display that can be panel mounted or attached to a tach with a supplied bracket. The LED display features full spectrum color capability including white with user selected colors for each function and automatic dimming under low light conditions.
• Launch and multi-stage shift light capability. A launch RPM and up to five shift RPM levels can be defined to support up to six gear transmissions. " Gear detection is based on vehicle speed (if a vehicle speed sensor is available) or RPM drop during shift. Vehicle speed based gear detection allows use in applications other than drag racing as it allows correct gear sensing after downshifts.
• Launch detection is based on vehicle speed (if a vehicle speed sensor is available) or a signal from a line lock solenoid.
• Two independent programmable alarm functions for analog inputs. Additional programmable alarm and general purpose control output functions are described in the software section.
• Flexible RPM input compatible with high voltage coil drive (vehicles with coil packs or distributor ignition), standard 12 volt tach signal, or low level logic drive (newer vehicles with coil-on-plug).
• Built-in data logging. Ideal as basic vehicle data logger during dyno tuning or on the track. Logs data whenever system is armed. Stores last 5 minutes of data at 10 samples/second.
• Data logged includes throttle position, RPM, vehicle speed, status of all inputs and outputs, and two 0-5 volt analog inputs.
• 0-5 Volt analog inputs are compatible with Daytona Sensors single or dual channel WEGO II systems for logging wide-band air/fuel ratio data. General purpose input/output (GPIO) terminal. The output can be used to trigger a nitrous system or activate high gear retard.
• Heavy duty industrial grade clamping terminal blocks allow easy and reliable hookup without soldering or crimping.
• Compact size: 3.3"L x 2.4"W x 1.1"H (not including mounting feet and terminal block).
• USB interface to laptop or PC. Powerful Windows software for programming controller and downloading logged data.
• Click here for more information and screen shots

Part Number	Description	Racer Price
64-sl-1	Daytona Sensor Shift Light & Datalogger	$284.75

MSD Digital LED Shift Light

• Installs with distributors, coil packs or coil-on-plug systems ranging from single to 12-cylinders
• Programmable from 100 - 16,000 rpm down to 10 rpm increments
• Six bright LEDs are easy to view in daylight and can be dimmed at night
• Supplied with an easy to install GMR pickup

The most universal and easy to use shift light available! MSD's new compact digital shift light can be installed on all types of motorcycle and ATV applications. The tiny digital controller inside the compact housing gives you the ability to program the rpm activation point through the easy to view LED panel and two programming buttons. This shift light is programmable from 100-16,000 rpm in 10 rpm increments. Six bright LED’s are easy to view in daylight and can be dimmed at night.

NOTE: Supplied with the new GMR pickup. This makes installation even easier on diesels, points, coil-on-plug and most any other application!

MSD LED MC-4 & SB6 Shift Light

• Adjustable Intensity
• Must be used with an MC-4 Ignition or an SB6 (SB6 installation requires some wiring modification)

The most universal and easy to use shift light available! Our new compact Digital shift light can be installed on all types of motorcycle applications using the MC-4 Ignition. The tiny digital controller inside the compact housing gives you the ability to program the rpm activation point through the easy to view LED panel and two programming buttons. This shift light is programmable from 100-16,000 rpm in 10 rpm increments. Six bright LED’s are easy to view in daylight and can be dimmed at night. The 2-7542 adjustable intensity shift light replaces the obsolete 2-7552 non-adjustable light.

Part Number	Description	Racer Price
2-89631	MSD Digital Led Shift Light	$338.95
2-8963	MSD Digital Led Shift Light 5 Speed	$338.95
2-7542	MSD Shift Light for MC4, Adjustable Intensity	$145.00

Dyna Shift Minder Systems

• Small Size
• Dip Switch Settings
• Night Cover
• Easy To Install

The Dyna Shift Minder System is the ultimate in racing shift light products. The Shift Minder System consists of an attractive billet aluminum Shift Light and the Shift Minder Control Module.

The Shift Minder also has a built in bulb test feature, when power is first applied to the Shift Minder, an attached Shift Light will turn on momentarily indicating bulb connection.

Newly added for 2004, the High RPM versions of our Shift Minders are designed to work with the higher revving engines in the latest sport bikes. The DSM-2H is designed to work with the tach signal on most new 2 and 4 cylinder sport bikes, or with the coil signal on high revving 2 cylinders. The DSM-4H is designed to work on the same applications that the DSM-4 works on, but works in a higher RPM range.

MPS Tach Adapter 4 Coil The MPS tach adapter is used to adapt a Dyna 5-DSM-4 to early model (99-01) 16 bit processor Hayabusas. Will flash at 1/2 of set RPM as well as the desired RPM if used with O2 & up (32 bit processors) Hayabusas. The 5-DSM-2H is the best option for the Hayabusa.	MPS LED Replacement Bulb When that original bulb burns out from vibration you will want to replace it with a Lifetime Warranted MPS LED Bulb.

Note: All 4 cylinder fuel injected sport bikes use the 5-DSMS-2H

Part Number	Description	Racer Price
5-DSMS-2H	Shift Minder System W/Shift Light, 2 Cylinder High RPM (8,000 to 15,875 RPM	$379.99
5-DSM-2H	Shift Minder Control Module, 2 Cylinder High RPM (8,000 to 15,875 RPM)	$244.43
5-DSMS-4H	Shift Minder System W/Shift Light, 4 Cylinder High RPM (8,000 to 15,875 RPM	$379.99
5-DSM-4H	Shift Minder Control Module, 4 Cylinder High RPM (8,000 to 15,875 RPM)	$194.43
5-DSMS-4	Dyna Shift Minder System w/ Shift Light,, 4 Cyl (6,000-13,875rpm)	$379.99
5-DSM-4	Dyna Shift Minder Control Module, 4 Cyl (6,000-13,875rpm)	$244.43
5-DSMS-2	Dyna Shift Minder System w/ Shift Light,, 2 Cyl (4,000-11,875 rpm)	$379.99
5-DSM-2	Dyna Shift Minder Control Module, 2 Cyl (4,000-11,875 rpm)	$244.43
5-DSL-1	Dyna Shift Light Only	$155.54
1-0271	MPS Tach Adapter 4 Coil	$17.32
1-0106	MPS Tach Adapter	$11.55
1-0273	MPS LED Shift Light Conversion	$33.49

All parts sold by MPS are for off road closed course use. They are not intended for use on public streets or highways.

As hard as we try, the prices on website are NOT guaranteed. Please check with MPS for the most accurate pricing.

MPS Racing 1264 Cain Mill Road - Russellville, TN 37860 Phone: (321) 972-8282 Hours: 9:30am - 5:30pm, Monday - Friday Sales E-Mail: [email protected]

©1995-2025 Motorcycle Performance Specialties. All rights reserved. | Privacy Policy