Shock Pump Vs Regular Pump?? - Mountain Bike Reviews Forum

Maybe your like

Menu Log in Sign up

Home
Forums
MTBR Discussion Forums
Beginner's Corner

REVIEWS DEALS BIKESHOPS TRAILS

Luckyr L Noob question, I've tried searching but didn't see anything that really seemed to explain. What is the difference between a shock pump and a regular pump? I have a Trek Cobia with a RockShox Recon Silver TK 29 w/Solo Air spring and it looks like a regular schrader valve or am I missing something? #1 · Oct 21, 2012 Noob question, I've tried searching but didn't see anything that really seemed to explain. What is the difference between a shock pump and a regular pump? I have a Trek Cobia with a RockShox Recon Silver TK 29 w/Solo Air spring and it looks like a regular schrader valve or am I missing something? Sort by Oldest first Oldest first Newest first Most reactions #2 · Oct 21, 2012 yes it is a schrader valve, but a tire pump is for high volume and a shock pump is for high pressure ... get a shock pump #3 · Oct 21, 2012 A shock pump makes a seal with the valve stem before it actually opens the valve. This prevents air loss when you remove it. Due to the small volume of the air chamber in forks and shocks, the amount of air loss a normal tire pump would allow would be unacceptable. You may also have a difficult time reaching the pressures required using a tire pump. Get a shock pump. #9 · Oct 22, 2012 My fork (g2 revelation) seems to let a bit of air out when I screw my pump on and off. Just a small hiss. Havent actually tried to check it but im not sure it would be accurate anyway if it is indeed releasing pressure. Show more replies 0 Reply #4 · Oct 21, 2012 In addition to the above mentioned points, a shock pump will also have a bleed off valve that you can use to very slowly bleed off small volumes of air to dial in the shock/fork pressure. Very important in small volume/high pressure applications. Can't be done with tire pump. Get a shock pump

#5 · Oct 21, 2012 well the three posters here have summed it up pretty well. You will need a shock pump for a tire pump won't work. oh yeah get a shock pump:thumbsup: #6 · Oct 22, 2012 This all makes sense. But how big of a priority is it for a noob with a finite budget? Is this a must have or next time somebody has one on clearance? #8 · Oct 22, 2012

Luckyr said: ...Is this a must have or next time somebody has one on clearance? Click to expand...

If your fork is close to the correct pressure (something like ~20% sag and doesn't bottom out), it can wait for a short time. A fork should hold it's pressure for a long time. Don't put it off too long or you won't have it when you do need it. And just in case no one has mentioned it yet...get a shock pump. Green Yellow Colorfulness Pattern Amber

1 Reply #7 · Oct 22, 2012 (Edited) Your bike should have come with one. If not, go into the local shop. I'd be willing to bet they'd either give you one or sell you one for $5-10. Yes, you need it. And, the dental bill from doing a header into a rock because your fork compressed wayyyy too much on a descent, because you couldn't be bothered to shell out $10, might be a bit steep. #10 · Oct 22, 2012 That hiss is just the air in the pump's hose leaving. Its not from the fork, the schrader valve closes as soon as you unscrew the hose. #11 · Oct 22, 2012 Makes sense. Thanks. #13 · Oct 22, 2012 (Edited) The problem is that many beginners like myself have encountered that reconnecting the pump DID in fact prove that pressure was lost while disconnecting even after doing it repeatedly. No, I do not turn it gingerly when disconnecting resulting in unnecessary pressure loss. I am using some RockShox brand pump I bought with my bike and it is not cracked or damaged and there is no bulletin board message out noting it is defective. I have read in many threads that people have had experiences like mine and the response is always 'You're doing it wrong', 'It is broken', 'It is normal, don't worry about it', 'your shock valve is leaky', and "Shock pumps work poorly unless you buy one of the few good ones'. Using a pump with an anti-air loss feature proved that in my case it was just my pump and apparently every other pump I have used until then. It is sort of like the Avid Elixir brakes, they just perform at like 70% of what you would expect even when it is working 100%. YMMV, IMO, IMHO, IME, etc. I researched a replacement pump last week and resolved to order this one soon: Amazon.com: Topeak Pocket Shock DXG Bike Pump: Sports & Outdoors It is a good choice because it has a solid reputation, is not overpriced, and has the all important feature of separating hose pressure from shock pressure prior to disconnecting. Rock on fellow bikers. #15 · Oct 22, 2012 I don't get it.You just described the exact thing that gmcttr went to great lengths to point out. Air doesn't typically get removed from the air chamber of the fork or shock when the hose is removed. Unless the pump is cheap or the fitting is defective, the air that escapes when you have fully pumped up your fork is from the hose. Now when you reconnect the pump, of course you are going to loose air, the volume of the hose and pump needs to be filled with air and the only place for air to come from before you start pumping is from the fork's air cavity. Thus, the air pressure is reduced when you connect the hose to the fork/shock. I think what we're all missing is that it doesn't matter if the air pressure goes down when you connect the pump or not. You should write down your air pressure settings and pump to those numbers each time you adjust your air pressure. If you are trying to dial in a different feel, pump the fork to a known pressure (write it down) try it out and adjust from there. Let's say my fork is at 150 psi and it's feeling pretty stiff: I'm going to attach my shock pump, pump it to 150 psi and give it a quick test to make sure that it feels like I was expecting. Then I'm probably going to work in 5 psi increments to try and get the fork to feel softer; I'll attach the shock pump and adjust the pressure to 145 psi (I'll write it down somewhere so I know what my setting is) then I'll give it a try. If it's too hard still, I'll repeat the process if it's too soft, I'll pump it up to whatever pressure I think is best; the point being that it doesn't matter how much air is lost when the pump is connected it only matters that you know what pressure you're trying to reach. 0 Reply #16 · Oct 22, 2012 ART C. Like the others have stated when you reconnect the pump the hose and the pump chamber must fill with air from the shock, thus the pressure reading will be 5psi or so lower than what you pumped it up to before. You are not losing air from the shock. Insert Quotes Post Reply

posts 16M members 536K Since 1990 A forum community dedicated to Mountain Bike owners and enthusiasts. Come join the discussion about bike parts, components, deals, performance, modifications, classifieds, trails, troubleshooting, maintenance, and more! Show Less Full Forum Listing Explore Our Forums General Discussion Downhill - Freeride California - Norcal Shocks and Suspension Passion