Simple Guide For Measuring V-Belts | The Poultry Site

Share by Facebook Share by Twitter Share by LinkedIn Share by Email Equipment & innovation Hardware Company/products Simple guide for measuring V-Belts Replacing the belts on fans every year is a smart investment to ensure they are delivering their maximum performance. Worn fan belts can cause as much as 20% loss of cfm output. calendar icon 4 October 2018 clock icon 1 minute read North America

Ordering the correct replacement fan belt is as easy taking a few simple measurements.

First, to determine what type of belt is on your fan, measure the width of the belt. Most fan belts are A type belts with a measurement of 1/2″. If the fan belt measures 5/8″ it is classified as type B belt. You may see a belt described as type AX. The X means it has a cogged design or notches in the belt. The cogged profile increases the power transfer and typically used for only industrial applications because of their higher cost.

Next, you need to measure the length of the belt. Use a cloth measuring tape (not a steel one) and wrap it around the outside of the belt. You also use a thin string to take this measurement and place it on a steel tape to get the correct length.

Next, for “A” Belts (1/2” width) subtract two-inches from the outside measurement to select the correct V-belt. For example, if the outer measurement is 48-inches and you subtract two inches, then HSA46 would be the right belt for your fan.

For “B” Belts (5/8” width) subtract 3” from the outside measurement to select the correct V-Belt. For example, if the outer measurement is 48-inches and you subtract three inches, then HSB45 would be the right belt for your fan.

Hog Slat’s line of GroBelts offers producers a top quality V-belts at a great price. GroBelts feature wear resistant, high modulus compression rubber embedded with polyester cords to reduce stretch. To order go to GroBelts.

Also, see our Laser Pully Alignment Kit. It’s a great tool to accurately check the alignment of the drive pulleys while you are changing the fan belts.

Sponsored Article

Georgia Poultry

Our Partners

World Poultry Science Association Congress Poultry Science Association Targan dsm-firmenich Lallemand Lanxess BioZyme Hy-Line International

More News

View all

Egg Farmers of Canada named top employer again

Company News calendar icon 4 March 2026 clock icon 1 minute read

US farm sentiment edges higher in February

Markets & policy Market trends calendar icon 4 March 2026 clock icon 2 minute read

Producers cite better conditions but remain cautious on outlook

European Committee of Regions warn CAP reform could weaken rural policy

Markets & policy Policy and regulation calendar icon 4 March 2026 clock icon 3 minute read

Leaders call for safeguards as EU debates post-2027 CAP changes

Sponsored Article

Georgia Poultry

Our Partners

World Poultry Science Association Congress Poultry Science Association Targan dsm-firmenich Lallemand Lanxess BioZyme Hy-Line International No Advert Set © 2000 - 2026 - Global Ag Media. All Rights Reserved | No part of this site may be reproduced without permission.
  • Our Sites
    • The Poultry Site
    • The Pig Site
    • The Cattle Site
    • The Dairy Site
    • The Beef Site
    • El Sitio Avicola
    • El Sitio Porcino
  • Tag » How To Measure V Belt