Simple Ways To Trim The Bottom Of A Door - WikiHow

Home » How To Trim A Door » Simple Ways To Trim The Bottom Of A Door - WikiHow

Maybe your like

Skip to ContentQuizzes
  • Home
  • Random
  • Browse Articles
  • Quizzes & Games
  • All QuizzesHot
  • Love Quizzes
  • Personality Quizzes
  • Fun Games
  • Dating Simulator
  • Learn Something New
  • Forums
  • Courses
  • Happiness Hub
  • Explore More
  • Support wikiHow
  • About wikiHow
  • Log in / Sign up
Terms of Use wikiHow is where trusted research and expert knowledge come together. Learn why people trust wikiHow How to Trim the Bottom of a Door PDF download Download Article Learn how to safely and accurately trim an oversized door Co-authored by Patrick Johns and Eric McClure

Last Updated: January 30, 2025 References

PDF download Download Article
  • Marking and Removing Your Door
    • |
  • Attaching Your Straight Edge
    • |
  • Cutting Your Door and Reinstalling It
    • |
  • Expert Q&A
    • |
  • Tips
    • |
  • Things You'll Need
|Show more |Show less X

This article was co-authored by Patrick Johns and by wikiHow staff writer, Eric McClure. Patrick Johns is a Home Improvement Specialist and the Owner of CatchAll Handyman Services. With more than 28 years of experience, he has worked on a variety of home improvement projects, such as carpentry, plumbing, and door and window installations in both commercial and residential properties. There are 10 references cited in this article, which can be found at the bottom of the page. This article has been viewed 90,180 times.

If your door is getting stuck or dragging against your flooring, it’s possible that your door is too big for your frame and needs to be trimmed down. To do this, use a 1⁄4–1⁄2 in (0.64–1.27 cm) wood shim to mark your cutting line at the bottom of the door. Then, remove the door and use a straight edge and painter’s tape to set up a perfectly-controlled cut with a circular saw. This is not a particularly difficult process as far as the cutting goes, but you do need to be careful and accurate when applying your painter’s tape and straight edge to make your cut as clean as possible.

Best Way to Shave the Bottom of a Door

  1. Hold a 1⁄4-1⁄2 in (0.64-1.27 cm) wood shim against the bottom of the door. Mark the top twice.
  2. Remove the door’s top, bottom, and middle hinges and set it on two sawhorses.
  3. Run painter’s tape along the marks you made earlier to mark your cut. Use additional tape to protect the finish.
  4. Measure the distance from your circular saw’s blade to the edge of the saw’s base plate.
  5. Clamp a straight edge in place parallel to the cut line using bar clamps.
  6. Wear proper protective gear and use your saw to make the cut.
  7. Remove the tape and brush away sawdust before reinstalling the door.

Steps

Part 1 Part 1 of 3:

Marking and Removing Your Door

PDF download Download Article
  1. Step 1 Grab a 1⁄4–1⁄2 in (0.64–1.27 cm) wood shim based on your desired clearance. 1 Grab a 1⁄4–1⁄2 in (0.64–1.27 cm) wood shim based on your desired clearance. There should be at least 1⁄4 in (0.64 cm) of space between the floor and the bottom of your door. If your door won’t move at all, grab a 1⁄2 in (1.3 cm) wood shim. If the door is moving freely but it’s rubbing against your flooring material at certain locations, pick a 1⁄4 in (0.64 cm) wood shim. Measure the shim 2-3 times at different locations to confirm that it is perfectly even and flat.[1]
    • Check your hinges before doing this. It’s possible that your door is sticking because the hinges are loose.
    • If you want a larger gap between your door and the floor, you can use a larger shim. The 1⁄2 in (1.3 cm) measurement is simply the most common choice.
    • Shims are preferable for this because they’re fabricated with straight edges and they have perfectly-flat bottoms. You can use a standard piece of wood or a book if you prefer, though.
  2. Step 2 Hold the shim against the bottom of the door and mark your cut twice. 2 Hold the shim against the bottom of the door and mark your cut twice. Take your wood shim and put it on the ground against the hinge side of the door. Hold the shim in place and mark the top of the shim on your door with carpentry pencil. Repeat this process on the strike side of the door. Then, repeat this process on the back side of the door. You should have a total of 4 hash marks.[2]
    • If your door is getting caught on a specific part of your floor, pull the door out to the area where it is getting stuck and complete this process there.
    • The strike side of the door refers to the side of the door where your handle is. The hinge side is the side where your door meets the wall.
    • You’re basically using the shim to determine how high you need to cut. You can’t measure this cut independently because the floor may not be perfectly flat. This is also why you can’t use a long length of wood to do this; if you do, the cut may not be straight.
    Advertisement
  3. Step 3 Remove the hinge pins from the top and bottom of the door. 3 Remove the hinge pins from the top and bottom of the door. Grab a flathead screwdriver and a hammer. Stick the head of the screwdriver under the head of the pin at the bottom hinge. Angle the screwdriver at a 45-degree angle, pointing up. Gently tap the back of the screwdriver with a hammer until the pin comes loose. Once it’s sticking up 2–3 inches (5.1–7.6 cm), pull the pin out by hand. Repeat this process for the hinge at the top of the door.[3]
    • Leave the middle hinge for last to keep the weight evenly distributed while you remove the door.
    • You can use a small chisel instead of a screwdriver and a mallet instead of a hammer.
  4. Step 4 Brace the door as you remove the middle hinge pin. 4 Brace the door as you remove the middle hinge pin. This is much easier if you enlist a friend to hold the door for you. Otherwise, slide a book or shim under the door to keep it from falling down when you remove the last pin. Use your screwdriver and hammer to pop the middle hinge pin out 2–3 inches (5.1–7.6 cm). Hold the top of the door with your nondominant hand to brace it and remove the last hinge pin by hand.[4]
  5. Step 5 Lift the door out of the hinges and set it on sawhorses. 5 Lift the door out of the hinges and set it on sawhorses. With all of the hinge pins removed, the door is no longer attached to the frame. Grab the door by its sides and slide it out of the doorway. Set the door flat on top of 2 sawhorses.[5]
  6. Step 6 Use painter’s tape to mark your cut by running it from mark to mark. 6 Use painter’s tape to mark your cut by running it from mark to mark. Pull out a length of painter’s tape that’s slightly longer than the width of your door. Hold the tape over the top of your door and line the left side up with the hash mark you made from your shim. Press the tape down gently and line the other end up with the hash mark on the right. Once your tape is lined up with both marks, press it down and smooth it out with your palms.[6]
    • If there are pleats in the tape or it isn’t laying evenly, pull the tape up and try again. The tape must sit as flat and evenly as possible.
    • If you aren’t sure if the tape is even, use a spirit level to check the straightness of the tape where it marks your cut line.

    Tip: The painter’s tape will serve as the straight edge to mark your cut. You can use a level and carpentry pencil to mark the cut before adding painter’s tape if you prefer, but you need to tape the door anyway to keep the wood from splintering, so there’s no point to outlining it first.

  7. Step 7 Wrap additional layers of painter’s tape above the cut line to protect the finish. 7 Wrap additional layers of painter’s tape above the cut line to protect the finish. To keep shrapnel or sawdust from scratching your finish, wrap 4-5 additional layers of painter’s tape above the cut line. Add additional layers of tape above the cut line until you’ve wrapped the 10–20 inches (25–51 cm) above your cut line.[7]
    • You shouldn’t have any tape underneath the hash marks you made with the wood shim.
    • Basically, you’re just using the tape to keep sawdust from scratching your finish. The tape doesn’t need to be particularly thick or layered on top of itself.
    8. Advertisement
Part 2 Part 2 of 3:

Attaching Your Straight Edge

PDF download Download Article
  1. Step 1 Measure the distance from your saw blade to the edge of the base plate. 1 Measure the distance from your saw blade to the edge of the base plate. Grab your circular saw and a measuring tape or level. Hold the edge of the measuring tape or level against the blade of the saw. Calculate the distance from the saw blade to the edge of the saw’s base plate.[8]
    • Do this outside or in your workshop if possible. If you use your circular saw indoors, you’re going to end up with sawdust flying everywhere.

    Tip: The base plate refers to the flat platform that wraps around your saw blade. It is designed to keep the blade flat and stable as you cut. Since the edge of the plate runs parallel to the saw blade, you are going to use the plate and a straight edge to make a perfectly straight cut.

  2. Step 2 Set a straight edge parallel to your cut line based on your measurement. 2 Set a straight edge parallel to your cut line based on your measurement. Grab a level or wood dowel to use as a straight edge. Put it on top of your door above the cut line. Use your level or measuring tape to transfer the measurement of the saw and plate to the door so that the straight edge rests where the edge of the plate will sit.[9]
    • For example, if the distance between the edge of the saw’s base plate and the saw blade is 2.5 inches (6.4 cm), set your straight edge 2.5 inches (6.4 cm) above the line where the painter’s tape meets the bottom of the door.
  3. Step 3 Clamp the straight edge in place using bar clamps on each end of the cut line. 3 Clamp the straight edge in place using bar clamps on each end of the cut line. Get a pair of bar clamps. Hold your first clamp vertically around the straight edge and door. Pull the trigger to close the clamps and hold it in place against your door. Repeat this process on the other side with your second set of bar clamps. Re-measure the distance from the cutting line to the straight edge to confirm that it matches the distance from the base plate to your saw blade.[10]
    • You many need to make minor adjustments once you clamp the straight edge to your door since it may move around a little as you’re clamping it in place.
    • Take your time on this step. The more accurate your straight edge is, the cleaner your cut will be.
    4. Advertisement
Part 3 Part 3 of 3:

Cutting Your Door and Reinstalling It

PDF download Download Article
  1. Step 1 Put on protective eyewear, a dust mask, and gloves. 1 Put on protective eyewear, a dust mask, and gloves. To keep your hands, eyes, and lungs safe from the sawdust, take the proper safety precautions. Wear a pair of thick, comfortable gloves. Put on a dust mask or respirator. Wear a pair of protective glasses or goggles. Wear hearing protection if you have a high-powered saw.
    • Do not operate a circular saw without wearing your safety gear.
    • Any saw blade designed for cutting wood will work for making this cut.
  2. Step 2 Hold your saw against the straight edge and inspect your cut line. 2 Hold your saw against the straight edge and inspect your cut line. Take your circular saw and put the plate against the side of your straight edge. Inspect the straight edge to ensure that your base plate is flush. Then, learn forward a little and inspect the guide line on the front of your saw to ensure that it lines up with the edge of your painter’s tape.[11]
    • If the saw blade lines up with the tape and your base plate is flush against the straight edge, your cut will be perfect.

    Tip: If the saw blade doesn’t line up with your painter’s tape, you either miscalculated the distance between the edge of the blade and the edge of the base plate, or you made a mistake when attaching your straight edge.

  3. Step 3 Pull the trigger and run your saw blade through your cut. 3 Pull the trigger and run your saw blade through your cut. Pull the trigger on the saw on and wait 3-5 seconds to give the blade time to get up to speed. Then, push the saw forward until the teeth hit the side of your door. Let the blade pull your saw through the cut and gently guide the base plate along the straight edge. At the end of the cut, drive the saw all through the edge of the door before releasing the trigger.[12]
    • Keep both of your hands on top of the saw’s handle to steady it as you cut.
  4. Step 4 Brush away the sawdust and remove the painter’s tape. 4 Brush away the sawdust and remove the painter’s tape. Set your saw aside and unplug it. Brush the sawdust away with a dry cloth or paint brush. Then, unravel all of the painter’s tape, starting with the lengths of tape closer to the center of your door. Work your way down to the cut line and remove all of your tape before discarding it.[13]
    • If there are any pieces of splintered wood sticking out from your cut line, gently brush them away. The painter’s tape should prevent this from happening, though.
    • You can use compressed air instead of a brush if you prefer.
  5. Step 5 Hang your door on the hinges the same way you took it off. 5 Hang your door on the hinges the same way you took it off. With your door trimmed, re-hang the door on your hinges. Put a book under the door to stabilize it and raise it up, or enlist a friend to hold it for you. Slide the middle hinge pin through the middle hinge and use a hammer or mallet to gently tap it back into place. With your middle hinge installed, repeat this process for the top and bottom hinge.[14]
    • Your door will now have a 1⁄2 in (1.3 cm) of clearance at the bottom!
    6. Advertisement

Expert Q&A

Search Add New Question
  • Question How do you trim the bottom of a door without it splintering? Patrick Johns Patrick Johns Home Improvement Specialist Patrick Johns is a Home Improvement Specialist and the Owner of CatchAll Handyman Services. With more than 28 years of experience, he has worked on a variety of home improvement projects, such as carpentry, plumbing, and door and window installations in both commercial and residential properties. Patrick Johns Patrick Johns Home Improvement Specialist Expert Answer Always set the depth of your cut before you get started. You definitely don't want to start trimming with your saw set for full depth! Thanks! We're glad this was helpful. Thank you for your feedback. If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow Yes No Not Helpful 1 Helpful 7
Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

Tips

  • If possible, use a combo type blade or a finished blade that has the teeth closer together and not so spread apart.[15] Thanks Helpful 0 Not Helpful 1
  • When cross cutting, you'll inevitably end up going across the grain, which can cause splintering. In these cases, make sure your blade has the teeth closer together, as you'll get a better cut and less splintering.[16] Thanks Helpful 0 Not Helpful 0
  • Before removing your door and trimming it, check your hinges. Your door drags against the floor because the hinges are loose and the door is tilting away from the frame. You may only need to tighten your hinges with a screwdriver. Thanks Helpful 1 Not Helpful 1
Submit a Tip All tip submissions are carefully reviewed before being published Name Please provide your name and last initial Submit Thanks for submitting a tip for review! Advertisement

Things You’ll Need

  • Wood shim (1⁄4–1⁄2 in (0.64–1.27 cm) thick)
  • Painter’s tape
  • Measuring tape
  • Carpentry pencil
  • Hammer
  • Flathead screwdriver
  • Level
  • Straight edge
  • Protective eyewear
  • Gloves
  • Dust mask
  • Circular saw
  • Sawhorses
  • Bar clamps

You Might Also Like

Hang an Interior DoorHow toHang an Interior Door Fix a Rubbing DoorHow toFix a Rubbing Door Level a DoorHow toLevel a Door Fit a DoorHow toFit a Door Install a Door JambExpert Advice on How to Build and Install Door Jambs Hang a Prehung DoorHow toHang a Prehung Door Hang a DoorHow toHang a Door Adjust Door HingesHow toAdjust Door Hinges Trim a Door FrameHow to Cut Door Trim and Attach It to a Door Frame Install a PVC DoorHow toInstall a PVC Door Install an Exterior DoorHow toInstall an Exterior Door Install a DoorHow to Install Interior Doors All by Yourself Install an Interior DoorHow to Install an Interior Door: 6 Simple Steps Plane a DoorHow toPlane a Door Advertisement

References

  1. ↑ https://youtu.be/Y_OLx6nzD4U?t=3
  2. ↑ https://youtu.be/Y_OLx6nzD4U?t=13
  3. ↑ https://www.architecturaldigest.com/story/small-space-hack-remove-doors
  4. ↑ https://www.architecturaldigest.com/story/small-space-hack-remove-doors
  5. ↑ https://www.architecturaldigest.com/story/small-space-hack-remove-doors
  6. ↑ https://youtu.be/Y_OLx6nzD4U?t=111
  7. ↑ https://www.bobvila.com/articles/343-how-to-install-a-new-door/
  8. ↑ https://youtu.be/Y_OLx6nzD4U?t=130
  9. ↑ https://youtu.be/Y_OLx6nzD4U?t=133
More References (7)
  1. ↑ https://www.bobvila.com/articles/343-how-to-install-a-new-door/
  2. ↑ https://youtu.be/Y_OLx6nzD4U?t=162
  3. ↑ https://youtu.be/Y_OLx6nzD4U?t=162
  4. ↑ https://youtu.be/Y_OLx6nzD4U?t=195
  5. ↑ https://www.architecturaldigest.com/story/small-space-hack-remove-doors
  6. ↑ Patrick Johns. Home Improvement Specialist. Expert Interview
  7. ↑ Patrick Johns. Home Improvement Specialist. Expert Interview

About This Article

Patrick Johns Co-authored by: Patrick Johns Home Improvement Specialist This article was co-authored by Patrick Johns and by wikiHow staff writer, Eric McClure. Patrick Johns is a Home Improvement Specialist and the Owner of CatchAll Handyman Services. With more than 28 years of experience, he has worked on a variety of home improvement projects, such as carpentry, plumbing, and door and window installations in both commercial and residential properties. This article has been viewed 90,180 times. 9 votes - 91% Co-authors: 5 Updated: January 30, 2025 Views: 90,180 Categories: Door Repairs
  • Print
  • Send fan mail to authors
Thanks to all authors for creating a page that has been read 90,180 times.

Did this article help you?

Yes No Advertisement Cookies make wikiHow better. By continuing to use our site, you agree to our cookie policy. Patrick Johns Co-authored by: Patrick Johns Home Improvement Specialist Co-authors: 5 Updated: January 30, 2025 Views: 90,180 91% of readers found this article helpful. 9 votes - 91% Click a star to add your vote

Quizzes & Games

Finish the Phrase QuizFinish the Phrase QuizTake QuizCan We Guess How Tall You Are QuizCan We Guess How Tall You Are QuizTake QuizDo I Have Common Sense QuizDo I Have Common Sense QuizTake QuizWhat Is My Face Shape QuizWhat Is My Face Shape QuizTake QuizWhat's My Hair Type QuizWhat's My Hair Type QuizTake QuizThe Impossible QuizThe Impossible QuizTake Quiz

You Might Also Like

Hang an Interior DoorHow toHang an Interior DoorFix a Rubbing DoorHow toFix a Rubbing DoorLevel a DoorHow toLevel a DoorFit a DoorHow toFit a Door

Featured Articles

15 Signs Your Ex Misses You (and What to Do About It)15 Signs Your Ex Misses You (and What to Do About It) Observe Hanukkah (From Candle Lighting to Latke Frying)How to Observe Hanukkah (From Candle Lighting to Latke Frying)165+ "You Are Special" Quotes For Friends, Family, Partners & More165+ "You Are Special" Quotes For Friends, Family, Partners & More115+ Brain Teasers For Adults & Kids (With Answers!)115+ Brain Teasers For Adults & Kids (With Answers!)When Will I Get My First Kiss QuizWhen Will I Get My First Kiss Quiz17 Believable Excuses to Miss Class At the Last Minute17 Believable Excuses to Miss Class At the Last Minute

Trending Articles

Let Us Rate You 1-10: Attractiveness Scale QuizLet Us Rate You 1-10: Attractiveness Scale QuizHow Much Do I Mog QuizHow Much Do I Mog QuizAm I Annoying QuizAm I Annoying QuizCollege Grad Intelligence Test: Can You Score An A+?College Grad Intelligence Test: Can You Score An A+?How Nonchalant Am I QuizHow Nonchalant Am I QuizHow Weird Am I QuizHow Weird Am I Quiz

Featured Articles

Speed Up Your Slow-Performing Mobile DataHow to Speed Up Your Slow-Performing Mobile Data Get a Nice BodyHow to Get a Nice BodyIce Cream Personality TestIce Cream Personality TestDress for WinterHow toDress for WinterNicknames for Your Girlfriend: 125+ Funny, Sweet & Clever IdeasNicknames for Your Girlfriend: 125+ Funny, Sweet & Clever Ideas Give Someone a Great GiftHow to Give Someone a Great Gift

Featured Articles

What Would My Life At Camp Half-Blood Be Like QuizWhat Would My Life At Camp Half-Blood Be Like QuizThe Best Hairstyles for Guys with Big ForeheadsThe Best Hairstyles for Guys with Big Foreheads22 Best Ideas for Scary (and Funny) Pranks22 Best Ideas for Scary (and Funny) Pranks Text Yourself: Fake Text Messages, Reminders, and MoreHow to Text Yourself: Fake Text Messages, Reminders, and MoreAccurate Omegaverse Quiz: 100% GuaranteeAccurate Omegaverse Quiz: 100% GuaranteeThe Hardest & Most Difficult Riddles for AdultsThe Hardest & Most Difficult Riddles for Adults

Watch Articles

Marinate Chicken: 4 Recipes and a Step-By-Step GuideHow to Marinate Chicken: 4 Recipes and a Step-By-Step GuideClean Shower TileHow toClean Shower TileDo Oblique CrunchesHow toDo Oblique CrunchesSimple Ways to Riffle Shuffle and Bridge Playing CardsSimple Ways to Riffle Shuffle and Bridge Playing CardsMake Black CoffeeHow toMake Black CoffeePlant a Seed in a PotHow toPlant a Seed in a Pot

Trending Articles

Can We Guess How Tall You Are QuizCan We Guess How Tall You Are QuizHow Would My Fandom See Me If I Were a Fictional Character QuizHow Would My Fandom See Me If I Were a Fictional Character QuizGet Claimed by Your Godly Parent (Percy Jackson Quiz)Get Claimed by Your Godly Parent (Percy Jackson Quiz)Am I a Furry QuizAm I a Furry Quiz170+ Deep, Heartfelt & Passionate Love Messages to Send Your Guy170+ Deep, Heartfelt & Passionate Love Messages to Send Your GuyThe World's Hardest Riddles (for Kids & Adults)The World's Hardest Riddles (for Kids & Adults)

Quizzes & Games

Would I Survive a Horror Movie QuizWould I Survive a Horror Movie QuizTake QuizWould I Be a Good Super Spy QuizWould I Be a Good Super Spy QuizTake QuizWhat Age Is My Brain QuizWhat Age Is My Brain QuizTake QuizBedroom Aesthetic QuizBedroom Aesthetic QuizTake QuizAm I Annoying QuizAm I Annoying QuizTake QuizWhy Can't I Sleep QuizWhy Can't I Sleep QuizTake Quiz wikiHow
  • Categories
  • Home and Garden
  • Home Maintenance
  • Doors and Windows
  • Door Repairs
wikiHow Newsletter You're all set! Helpful how-tos delivered toyour inbox every week! Sign me up! By signing up you are agreeing to receive emails according to our privacy policy.
  • Home
  • About wikiHow
  • Experts
  • Jobs
  • Contact Us
  • Site Map
  • Terms of Use
  • Privacy Policy
  • Do Not Sell or Share My Info
  • Not Selling Info
  • Contribute

Follow Us

×

wikiHow Tech Help Pro:

Develop the tech skills you need for work and life

Let's do this! X --821

Tag » How To Trim A Door