Sub Zero 500 And 600 Series Panel Removal | How To Guide

Skip to main content E-mail This Answer

E-MAIL THIS ANSWER

×

Sub Zero 500 and 600 Series Panel Removal | How to Guide

This field is required.

Please enter a valid email address.

This field is required.

Send Answer Sub-Zero 500 and 600 Series Panel Removal

Topics:

• How is the handle and trim molding strip removed on a 500 or 600 Series model for panel removal?
• How to take off an L-shaped handle that runs the length of the door or drawer?
• How to remove a framed panel from a 500 or 600 Series model
• How to remove a full length door handle
• Framed drawer or door panel removal instructions
• Instruction sheet part number 3755320

Answer:

Note: External dispenser models may have trim panels that need to be removed.

• Refer to 590, 680, 690 Handle and Glasswell Trim Panels for more information on removing panels on external dispenser models.

To remove door panel or full-length framed door handle:

1. Open the door and press a sticky piece of tape to center of magnetic trim strip.
   • Using anything other than tape to pry could scratch the molding.
2. Pull tape so that trim strip bows away from door, disengaging both ends of trim strip from the end caps.
3. With mounting screws exposed, remove the screws, then pull handle (or handle-side trim) from door.
4. With handle or trim removed, slide the door panel all the way out to remove.
   • On overlay models, the removal of this handle side door trim will allow the panel to slide out of the frame.
   • See also, Framed Door Panel Installation Instructions.
5. To install the handle, reverse the above steps.

Refer to the product Installation Guide for further installation information, including panel mounting and alignment.

See also:

• Framed Handle Is Loose
• Loose Handle on Sub-Zero Custom Panel
• 600 Series Grille Hardware
• Refrigeration Door Removal
• 700 Series Panel Removal

Related Questions

DID THIS ANSWER YOUR QUESTION?

YES NO

DID THIS ANSWER YOUR QUESTION?

× Please share your feedback with us. (*Optional) Send Feedback

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

First name*

First Name is required.

Last name*

Last Name is required.

Phone*

Please enter a valid 10-digit phone number.

Submit Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820

Customer Care and Support

Friendly reminder: This website utilizes cookies and other tracking technologies to track and tailor your online experience. We use and make such information available to third parties for purposes such as analytics, security, and advertising. By using this website, you are accepting our Terms of Use. You may change your cookie settings in your web browser at any time. Cookie Policy

Acknowledge