Subwoofer Box Calculator And Subwoofer Box Design

Sub Box

• Volume Calculator
• Sign Up
• Log In
• RU

Subwoofer Box Calculator

Subwoofer Box Design

Make a Subwoofer Box Design

Car Subwoofer Boxes & Enclosures

You can choose a suitable enclosure from the existing ones, or make your own subwoofer box design.

Subwoofer Box JBL CS1214

Subwoofer Box Apocalypse DB-SA2715D1

Subwoofer Box Skar Audio MA-8

Subwoofer Box Skar Audio DDX-15

Subwoofer Box Pioneer TS-A250D4

Subwoofer Box Alpine SWR-1542D

Subwoofer Box Rockford Fosgate Power 12" T1

Subwoofer Box Pioneer TS-W304R

Subwoofer Box Machete M15 v2 Sport

More Subwoofer Box DesignsSkip and make your own design

3D Subwoofer Enclosure Design

Car subwoofers can cover all demands on deep bass reproduction when fitted into a suitable enclosure.

Build a Subwoofer Box

New Subwoofer Enclosure Designs

Anyone can make and publish a subwoofer box design. Published enclosures appear in the catalog.

Subwoofer Box Kicker Box #1

Subwoofer Box Hifonics BRZ15D4 port 13.98x8.52x22.5

Subwoofer Box Hifonics brz15d4 2 tubos de 4" x 13.5"

Subwoofer Box Bass Warrior SPL 10

Subwoofer Box Ground Zero GZAW 15‑2.5K‑D2

Subwoofer Box DB Drive Euphoria : EW5

Subwoofer Box Eminence embassy 12 inch 20 hz

Subwoofer Box For-X XW-2412D4

Subwoofer Box xw 515 tofaş

Subwoofer Box xw 12 xmax 12

Subwoofer Box KICX Par Kicker Solo-Baric L7 S15L72

Subwoofer Box Dayton Audio UMII8-22 ~ 27Hz Slotted

Show More

How To Build A Subwoofer Enclosure At Home With No Special Tools

In this video we go over a way to make a quick subwoofer enclosure in just a few hours with no special tools. This is not the only way to build enclosures, in fact its not how I build most enclosures. However, most anyone can build these enclosures at home with this method. Don't settle for a prefab enclosure when you can build one cheap!

Trevor Moon Subscribe

241880 views 3694 likes

Make your own Subwoofer Box Design. It's very easy!

We can provide you with comprehensive Subwoofer Box Design Software for creating a high performance bass box. Build a ported box, sealed box for your low-frequency speaker. Make a subwoofer enclosure plan. Calculate speaker box volume, port length and other parameters without getting confused in formulas.

8 inch Subwoofer Box | Ported | Pipe on the Right Panel

10 inch Subwoofer Box | Ported | Pipe on the Right Panel

12 inch Subwoofer Box | Ported | Pipe on the Right Panel

15 inch Subwoofer Box | Ported | Pipe on the Right Panel

8 inch Subwoofer Box | Ported | Slot on the Front Panel

10 inch Subwoofer Box | Ported | Slot on the Front Panel

12 inch Subwoofer Box | Ported | Slot on the Front Panel

15 inch Subwoofer Box | Ported | Slot on the Front Panel

8 inch Subwoofer Box | Ported | Slot on the Right Panel

10 inch Subwoofer Box | Ported | Slot on the Right Panel

12 inch Subwoofer Box | Ported | Slot on the Right Panel

15 inch Subwoofer Box | Ported | Slot on the Right Panel

8 inch Subwoofer Box | Sealed

10 inch Subwoofer Box | Sealed

12 inch Subwoofer Box | Sealed

15 inch Subwoofer Box | Sealed

What is the Subwoofer Box for?

Everyone understands that the box is an indispensable part for the proper operation of the low-frequency speaker, which is designed to work in a certain volume, without it, the subwoofer speaker will simply chase the air, while the efficiency will decrease several tens of times.

Without a box, due to the lack of the necessary damper, the speaker is very easy to pull out of the stroke, this is when the coil starts to come out of the magnetic gap, it is at this point that any slight distortion of the diffuser can lead to a coil's impact on the core (cylindrical magnetic core in the center of the coil), which leads to the detachment of the winding from the coil frame.

Of course there are exceptions, for example, as Free Air subwoofers, which are designed to work in an open volume, but the efficiency of these subwoofers is very small, it is recommended to install them only as a last resort.

Start Subwoofer Box Design

Online Tone Generator for Loudspeaker Test

How Much Time is Needed to Make a Subwoofer Box Design?

Imagine how much time you will need to calculate the length of a port by its area and the net volume of a box, then calculate the occupied volume by the port, add it to the net internal volume of a box, and only after that, calculate the dimensions of a box, taking into account the material thickness.

You only need to enter the enclosure required dimensions and subwoofer parameters, then the online calculator will make a subwoofer box plan, 3D model, and other calculations in about 0.025 seconds - we think it's convincing.

• subwoofer box calculator
• 8 inch subwoofer box
• speaker box volume calculator
• ported subwoofer box design
• box design software
• 12 inch subwoofer box
• sub box
• box builder
• subwoofer calculator
• cubic feet sub box calculator
• 10 inch subwoofer box
• 15 inch subwoofer box
• subwoofer port calculator
• subwoofer enclosure
• best subwoofer box design for deep bass
• sub box volume calculator
• building a subwoofer box
• 3d box builder
• subwoofer boxes
• thiele small parameters