Switch On And Off Galaxy Tab Active3 And Take Screenshots

1. Wingtra Knowledge Base
2. 2. Flying and Data Acquisition
3. Flight Preparation

• 1. Getting Started with Wingtra
  • Quickstart guide (EN)
  • Get started with other Wingtra resources
  • Product specification
• 2. Flying and Data Acquisition
  • Safety Guidelines
  • Regulations overview
  • Payloads and Their Settings
  • Charging of WingtraOne
  • Flight Preparation
  • Flight planning
  • Advanced flight planning
  • Flying
  • Workflow with Specialty Cameras
  • LIDAR
• 3. Geotag your Data
  • WingtraOne Non-PPK workflow
  • WingtraOne PPK workflow
• 4. Process Your Data
  • Photogrammetry processing
  • RGB Imagery Processing
  • Multispectral Data Processing
• Troubleshooting
  • Advanced Troubleshooting

Switch on and off Galaxy Tab Active3 and take screenshots

Turning the device on and off

Turning the device on

Press and hold the Side key for a few seconds to turn on the device.

Turning the device off or restarting

1. To turn off the device, press and hold the Side key and the Volume down key simultaneously.
2. Tap Power off.
3. To restart the device, tap Restart.

Alternatively, open the notification panel (slide down twice) and tap .

You can set the device to turn off when you press and hold the Side key. Launch the Settings app, tap the Advanced features → Side key, and then tap Power off menu under Press and hold.

Forcing restart

If your device is frozen and unresponsive, press and hold the Side key and the Volume Down key simultaneously for more than 7 seconds to restart it.

Taking a screenshot

To take a screenshot you have to press and immediately release the Volume down and Side key. Wait until you hear the characteristic sound and see the screen flashes.

You can find the screenshot photo in the Gallery app.

If you need further assistance, you can find the official manual on the following link: Samsung Tab Active3 manual.