Sy (Square Yards) Calculator

Enter the length and width of an area and select the units to calculate the equivalent square yards.

Square Yards Calculator

Square Yards Carpet & Flooring Sod/Turf

Enter any 2 values to calculate the missing variable

Length Yards (yd) Feet (ft) Inches (in) Meters (m) Width Yards (yd) Feet (ft) Inches (in) Meters (m) Square Yards Square Yards (sq yd) Square Feet (sq ft) Square Meters (sq m) Square Inches (sq in)

Estimate square yards and linear yards for broadloom carpet.

Room Length Feet (ft) Yards (yd) Inches (in) Meters (m) Room Width Feet (ft) Yards (yd) Inches (in) Meters (m) Carpet Roll Width 12 ft (standard residential) 13 ft 6 in (13.5 ft) 15 ft (wide) Waste Allowance (%)

Estimate pallets of sod based on area and pallet coverage.

Lawn Length Feet (ft) Yards (yd) Inches (in) Meters (m) Lawn Width Feet (ft) Yards (yd) Inches (in) Meters (m) Pallet Coverage Preset 400 sq ft (small) 450 sq ft (standard) 500 sq ft (standard) 600 sq ft (large) 700 sq ft (large) Waste Allowance (%) Calculate Reset

• All Unit Converters
• Cost Per Square Foot Calculator
• Floor to Area Ratio Calculator
• Area of a semi circle calculator
• Package Girth Calculator
• Shiplap Calculator
• Inches to Square Inches Calculator
• Cost Per Square Inch Calculator
• Cost Per Square Cm Calculator

Square Yards Formula

The following formula is used to calculate the square yards of an area.

SY = L * W

• Where SY is the square yards (yd^2)
• L is the length of the area in yards
• W is the width of the area in yards

To calculate the square yards, multiply the length in yards by the width in yards.

What does SY stand for?

SY is most often used to described square yards which is a unit of measure of area, denoted yd^2.

Example Problem

How to calculate square yards?

1. First, determine the length of the area.

   In this example, the length of the area is measured to be 50 ft.

2. Next, determine the width of the area.

   For this problem, the width is measured to be 100 ft.

3. Next, multiply the length by the width to get the square area.

   The square area is calculated to be 50*100 = 5000 ft^2.

4. Finally, convert the area units into square yards.

   In this example, we need to convert square feet to square yards. This is done by dividing the result from above by 9. SY = 500 / 9 SY = 555.55 square yards (yd^2)