The Proper Torque For Wheel Nuts - It Still Runs

Maybe your like

The Proper Torque for Wheel Nuts by Jin MachinaUpdated June 12, 2023 itstillruns article image

wheel image by apeschi from Fotolia.com

Lug nuts are manufactured to meet the thread size of the studs on cars and are often tapered for wheel security. Torquing your car's lug nuts to the proper specification is very important for your safety and the function of your car.

Check Your Manual

Your car owner's manual may have the manufacturer's specification for torquing the lug nuts. Always go with this specification, if you have it. If not, ask a dealer that sells your car's brand or contact an auto shop for the information.

Torquing Patterns

You should torque your car's lug nuts in as much of a star pattern as you can, that is, bottom right, top left, etc. This helps to secure the wheel onto the car, preventing wheel tilting.

Torquing

Lug nut torquing is expressed in foot-pounds. Use torque sticks with an air gun or a torque wrench to get the correct torque. If your studs or lug nuts are sized between 12 X 1.25mm to 1.5mm or are 7/16-inch, torque the nuts to 70 to 80 foot-lbs; 14 X 1.25mm to 1.5mm, to 85 or 90; 1/2=inch 75 to 85; and 9/16-inch 135 to 145.

References

"Automotive Chassis Systems"; James D. Halderman; 2010
Tire Track: Wheel Tech Information - Wheel Lug Torquing

Writer Bio

Jin Machina began writing professionally in 2010. His main writing interests are film, literature, boxing and martial arts, automotive and performing arts. Machina has a Bachelor of Arts from the University of Washington, where he completed two majors: anthropology and comparative history of ideas, a discipline focused on culture, literature and the self.