TP-Link Archer D50 V1 Router Firmware 170223 Download

Maybe your like

TP-Link Archer D50 v1 Router Firmware 170223 Download

Posted at January 27, 2026 by PCI-DB Team

Install Driver Automatically

Device Name	TP-Link Archer D50 v1 Router Firmware 170223
Category	Router Switch Access Point
Manufacturer	TP-Link
File Size	9.3 MB
Supported OS	OS Independent

Download Now

TP-Link Archer D50 v1 Router Firmware 170223 Description

Changes:

- Fixed the bug that mobile UI cannot show normally.- Fixed the bug that the device cannot boot normally in some condition.

Update procedure

- Log into the TP-LINK device by typing http://192.168.0.1 in the address bar of the web browser (such as Internet Explorer, Firefox). The UserName and Password are both admin unless you have changed it before. - Click System Tools ->Firmware Upgrade, click the Browse button to choose the firmware you already extracted in the folder. - Click the Upgrade button. The device will reboot automatically after the upgrading has been f. Please wait about 3 minutes. - Click Status, verify that the router’s firmware has been upgraded. - It is recommended that restoring the device to factory default to make the new functions take effect; Click System Tools->Factory Defaults, Click Restore Button. - After restoring factory default, please login http://192.168.0.1 and re-enter the settings you have written down before upgrading.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release. Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user. In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade. If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes. If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions. If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

It is highly recommended to always use the most recent driver version available.Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TP-Link Drivers

D-Link DSR-150N rev.A2 Router Firmware 2.11 WW/RU

Device Type: Router Switch Access Point File Size: 23.8 MB OS Independent

Install Driver