When To Replace Sway Bar Links? - Testing Autos
Maybe your like
Sway (stabilizer) bar link. Some cars have only one sway bar in the front suspension. Sports cars have thicker sway bars for better stability when cornering. A sway bar is connected via rubber bushings to the car body or frame in the middle. Outer ends of the sway bar are connected to the parts of the vehicle suspension that holds the wheel (struts or control arms). The part that connects the outer ends of the sway bar to the suspension component is called a sway bar link. In most cars a sway bar link has two small ball joints at each end. Over time, the sway bar link ball joints wear out. The first sign of a worn-out sway bar link is a knocking noise from the suspension when driving slow over road bumps. In rare cases, if the grease inside the sway bar link joints dries up, it may also make a creaking noise when the suspension is moving up and down. Your mechanic can check the sway bar links while performing a regular service with the car on the lift. A worn-out sway bar link will show a freeplay when pushed up or down. An extremely worn out sway bar link can separate. This will cause your car to lean excessively in turns and feel less stable and secure on the road. A worn-out sway bar link must be replaced to keep your vehicle safe.
Sway bar link in a pickup truck. In a pickup truck, sway bar links have a slightly different design, see the lower photo. With this design, the rubber bushings that hold the sway bar link may wear out causing excessive play and "looseness" when driving over bumps or in turns. Is it necessary to replace both sway bar links if only one is bad? The answer is no, however your mechanic may recommend replacing both sway bar links because both links usually wear at the same rate and if one is bad, the other may go soon too. Do sway bar links have to be replaced whenever the struts, coil springs or control arms are replaced? No, but in many cars an old sway bar link could be extremely difficult to remove without damaging it, as the threads could be rusted. Because of this, sway bar links are often replaced whenever a component (a strut or control arm) that the link is connected to is replaced. Advertisement Do sway bar links have to be replaced at a certain mileage? There is no need to replace a sway bar link if it's working properly and is not worn out. Replacing a sway bar link is not very expensive. Typically, it costs $75-$140 per side in a repair shop. If you want to replace the sway bar link yourself, soak the thread with oil or WD-40, as the nuts could be seized and very difficult to come out. Do sway bar bushings have to be replaced whenever the sway bar links are changed? No, the bushings are separate items and should be replaced whenever they are worn out or if they become noisy. Read Next: How often should the wheel alignment be done? When does the tie rod end need to be replaced? When do the control arms need to be replaced? When should struts and shock absorbers be replaced? Related Articles
When to change your automatic transmission fluid?
When Should Tires be Replaced in a Car?
How often should the wheel alignment be done?
Tag » What Does The Sway Bar Do
-
What Does A Sway Bar Do? - Newmar
-
Lateral Grip: What Sway Bars Actually Do And Why They're Important
-
How Does A Sway Bar Work, What Is It And How Does It Affect My ...
-
How A Sway Bar Works - YouTube
-
What Does Your Car's Anti-roll Bar Do? - Torque
-
How Does A Sway Bar Work? - Brodie's Tire & Automotive
-
How A Sway Bar Can Affect Car Handling - Focus2Move
-
What Does A Sway Bar Do? | YourMechanic Advice
-
Anti-roll Bar - Wikipedia
-
What Does A Sway Bar Do? - QA1
-
Sway Bars Explained: What They Do & How They Work? - Low Offset
-
How Do Stabilizer Bars Work? - Auto | HowStuffWorks
-
What Does The Sway Bar Do? (Answered) - Your Sydney Mate
-
What Does The Sway Bar Do – A Complete Guide - Motor Verso