Where Is The TPMS Reset Button On A Jeep Compass?

• Brian Onyango

Updated on April 8, 2024

The Tire Pressure Monitoring System (TPMS) is designed to monitor the air pressure in a vehicle’s tires. If the air pressure in one or more tires is too low, the TPMS will warn the driver.

The TPMS reset button is used to turn off the warning light. The location of the TPMS reset button can vary depending on the make and model of the vehicle.

On the Jeep Compass, the TPMS reset button is located on the instrument panel, to the left of the steering wheel. To reset the TPMS, press and hold the reset button for about five seconds. The TPMS light will turn off when the system is reset.

What Is the TPMS in Jeep Compass

The Tire Pressure Monitoring System (TPMS) is designed to monitor the air pressure in a vehicle’s tires. If the air pressure in one or more tires is too low, the TPMS will warn the driver. The TPMS reset button is used to turn off the warning light.

Jeep introduced this technology in 2007. The system is designed to help improve safety and fuel economy.

The TPMS uses sensors to monitor the air pressure in the tires. If the pressure in one or more tires is too low, the TPMS will warn the driver. The warning light will come on and a message will appear on the instrument panel.

Types of TPMS Sensors

The TPMS exists in two different types: direct and indirect.

• Direct – Direct TPMS uses sensors that are mounted on the wheel to measure tire pressure. The sensors send a signal to the receiver, which then displays the pressure on the instrument panel.
• Indirect – Indirect TPMS uses the ABS to monitor tire pressure. The ABS monitors the rotational speed of each wheel. It monitors the speed of each wheel and compares it to the others. If one wheel is rotating at a different speed, it means that the tire pressure is low.

Why Does the TPMS Light Come On

You will need to use the TPMS button To reset the system. The TPMS light can be triggered in the following situations:

• If you get a new set of tires.
• After tire rotation.
• When you are servicing your vehicle’s tires.

How to Reset the TPMS on Jeep Compass

There are two ways that you can reset the TPMS on your Jeep Compass. The first is by using the TPMS button, and the second is by using a scan tool.

Using the TPMS Button

To reset the system using the TPMS button, start by turning on your car then press and hold the TPMs button for about five seconds. The TPMS light will turn off when the system is reset.

Using a Scan Tool

To reset the system using a scan tool, connect the scan tool to the vehicle’s OBD-II port. The follow these steps;

1. Select the ‘Tire Pressure Monitor’ menu.
2. Select the ‘Relearn Procedure’.
3. Follow the prompts on the scan tool.
4. The system will learn the new sensor IDs and turn off the TPMS light.

It is important to note that you should only use a scan tool to reset the TPMS if you have a new set of tires or if you are servicing your vehicle’s tires. If you do not have a new set of tires or you are not servicing your vehicle’s tires, you should use the TPMS button to reset the system.

Common Problems With Jeep Compass TPMS

Just like other electrical and mechanical systems, the TPMS is not without its problems. Here are some:

1. False Alarms

The most common problem with the TPMS is false alarms. The system may give a warning even when the tire pressure is normal. This is usually caused by a dirty or damaged sensor.

If you get a false alarm, you can try cleaning the sensor with a cloth. If that doesn’t work, you will need to replace the sensor.

2. Dead Battery

Another common problem is a dead battery. The sensors use radio frequencies to send signals to the receiver. If the battery is dead, the signals will not be received.

You can check the battery by using a multimeter. Place the black lead on the negative terminal and the red lead on the positive terminal. If the reading is below 12 volts, then the battery is dead and needs to be replaced.

How to Prevent TPMS Problems

The best way to prevent TPMS problems is to have the system serviced regularly. This includes checking the sensors and replacing them if necessary. You should also have the system checked if you get a false alarm.

It is also important to check your vehicle’s tires regularly. Check the pressure and make sure that they are inflated to the proper level. You should also check the tread depth and make sure that the tires are not worn.

Frequently Asked Questions

Why Is My Tire Pressure Light on but My Tires Are Fine?

Sometimes, the Tire Pressure Light will come on but the tires are fine. This is usually caused by a dirty or damaged sensor. When you get a false alarm, you can try cleaning the sensor with a cloth. If that doesn’t work, you will need to replace the sensor.

How Do I Know If My Jeep Compass Has TPMS?

Jeep began using the TPMS system in 2007. All Jeep Compass models from 2007 and newer have the TPMS system.

How Often Should I Service My Jeep Compass TPMS?

You should service your Jeep Compass TPMS every two years or when you get a false alarm. When you service the system, you should check the sensors and replace them if necessary. You should also have the system checked if you get a false alarm.

What Is the Difference Between Direct and Indirect TPMS?

Direct TPMS uses sensors to measure the pressure in each tire. Indirect TPMS uses ABS to monitor the rotational speed of each wheel. If one wheel is rotating at a different speed, it means that the tire pressure is low.

How Much Does It Cost to Service My Jeep Compass TPMS?

The service cost of your Jeep Compass TPMS will vary depending on the problem. If you have a false alarm, you can try cleaning the sensor with a cloth. If that doesn’t work, you will need to replace the sensor and it will cost you up to $200.

If you have a dead battery, you will need to replace the battery and it will cost you around $50.

For a comprehensive service, it will cost you around $100. This includes checking the sensors and replacing them if necessary. You should also have the system checked if you get a false alarm.

Can I Bypass My TPMS Sensors?

No, you should not bypass your TPMS sensors. Bypassing the sensors will disable the system and it will no longer be able to monitor the pressure in your tires. This can lead to a blowout, which can be very dangerous.

Conclusion

The TPMS button on the Jeep Compass is located on the dash. To reset the system, press and hold the button for about five seconds. The light on the button will flash to indicate that the system has been reset.

If you have any TPMS problems, you should have the system serviced by a professional. This includes checking the sensors and replacing them if necessary.

The TPMS is a great way to keep your Jeep Compass running safely and efficiently. However, like all systems, it is not without its problems. The most common problems are false alarms and dead batteries.

You can prevent these problems by having the system serviced regularly and by checking your vehicle’s tires regularly. If you do have a problem with your TPMS, the best way to fix it is to take it to a Jeep service center.

For more related Jeep topics, here are our other posts:

Jeep Compass Won’t Start: 7 Causes and Fixes

Does the Jeep Compass Come with a Spare Tire?

Which Jeep Models Have 6 or More Seats?