Where To Apply Brake Grease - Rick's Free Auto Repair Advice

Repair Topics > Brakes > Brake Grease > Where to apply brake greaseWhere to apply brake grease

How to Apply Brake Grease: A Step-by-Step Guide

Many DIYers don’t know where to apply brake grease or even why it’s so critical. Applying brake grease accomplishes two things: 1) It helps sliding parts slide, and 2) It reduces brake noise.

Where to apply brake grease

Apply brake grease to the caliper

• Caliper piston face to dampen vibrations between the backing plate or shim and the piston • Opposing caliper body (“fingers”) to dampen vibrations between the backing plate and the fingers

Where to apply it to the caliper bracket (abutment)

Where to apply grease on brake pads

If the noise reduction shims aren’t permanently attached to the backing plate, apply a light coating of grease to the backing plate before attaching the noise reduction shim.

Brake grease reduces brake noise

All brake pads produce vibration when they applied. Without lubrication, the vibrations travel through the friction material, to the steel brake pad backing plate, the caliper and then to the steering knuckle, strut and spring. The caliper knuckle, strut and spring amplify the vibrations and that’s what causes brake squeal, screech and sometimes grinding noise. Brake grease lubricates the backing plate-to-caliper piston and the backing plate-to-the-caliper fingers. That reduces the metal-to-metal vibration transfer and also dampens the vibrations.

What type of grease should you use

Use high temperature silicone (dielectric) brake grease. It resists breakdown under high temperatures and reduces corrosion. NEVER use a petroleum based grease on caliper slide pins! It will degrade the rubber caliper pin boots.

NEVER use anti-seize on caliper slide pins. Anti-seize is not designed to lubricate sliding parts. It’s sole purpose is to prevent parts from seizing.

Grease for brake pad backing plates, noise reduction shims, and caliper piston face

Use a high temperature synthetic/ceramic or molybdenum grease on the caliper areas shown below and on the caliper piston face. Both grease types reduce brake noise caused by normal braking vibration. Do not use a petroleum based grease on or near rubber seals.

©, 2022 Rick Muscoplat

Posted on March 13, 2022 by Rick Muscoplat

Categories

• Brake Grease

Tags

• where to apply brake grease

← Why Brake Grease is Vital for Caliper OperationThe Best Grease for Brakes: A Comprehensive Guide →