Transponder must be placed a minimum of 2 inches below the windshield frame . If the windshield has a solar strip, install the transponder at least 2 inches below the strip. Each suction cup has a “tab” that can be lifted to facilitate the removal of your Portable Transponder.
View more »
Customers should mount the transponder to the top center of the windshield, when possible. If a plastic cover for the rearview mirror exists in this ...
View more »
Duration: 4:34 Posted: 25 Mar 2019 VIDEO
View more »
Duration: 1:20 Posted: 21 Feb 2021 VIDEO
View more »
Place the SunPass on the windshield, at least two inches below the top. It should be directly to the left or right of the rear view mirror. Step 4. Press the ...
View more »
I found the perfect place though, the sticker goes behind the plastic cover for the rear view mirror, there is no tint there so it works and is hardly visible - ...
View more »
3. Position and Install the. Transponder Shield. Place the shield over the Mini Sticker so that the. Velcro strips ...
View more »
They are located along the top of the windshield to the left or right of the rearview mirror and along the bottom in the center. These areas can be best seen ...
View more »
How to Reposition or Remove SunPass Mini, and Other Sticker Type Transponders with Sticker Shield · Lay the Sticker Shield on a clean flat surface with the ...
View more »
The SunPass Mini sticks to the inside of the windshield. Once placed on the windshield, the Mini cannot be moved. The Mini sells for $4.99. The SunPass Portable ...
View more »
13 Oct 2020 · now called "Uni", which is good in 18 states. Because of the Class C overhang possibly blocking the signal, I mounted it in the center of the ...
View more »
Rating 4.5 (1,453) · US$12.99 · In stock Amazon.com: SunPass Mini Sticker Pre-Paid Toll Program For Florida (Styles ... Pass Holder for Most US States/Toll Pass Windshield Mount/Easy to Install and ...
View more »
2 Jul 2019 · When attaching an RFID transponder (used by many automated toll systems) inside Model X, place the transponder in the topmost area of the ...
View more »
I used a hole punch to put a hole in each corner of the name tag cover, then I took a knife and cut a 1 inch by 1/2 inch hole in the center of the name tag ...
View more »
You are watching: Top 14+ Where To Place Sunpass Sticker
TRUYỀN HÌNH CÁP SÔNG THU ĐÀ NẴNG
Address: 58 Hàm Nghi - Đà Nẵng
Facebook: https://fb.com/truyenhinhcapsongthu/
Twitter: @ Capsongthu
Copyright © 2022 | Designer Truyền Hình Cáp Sông Thu