White Board - Mounting Without Drilling - Tesa

Home » How To Hang A Whiteboard » White Board - Mounting Without Drilling - Tesa

Maybe your like

Skip to main content Home & Office Industry Home & Office DIY Magazine White board - mounting without drilling tesa_77904_adhesive_screw_whiteboard_mood_001 White board - mounting without drilling

Putting up a white board at home or in the office – without drilling A white board is always useful. In the office, you can sketch out the steps of a procedure. At home, it’s great for notes or messages to your family. With the adhesive screws, you can easily mount one without any damage to your wall.

Level of difficulty Original & quick

We need:

2 tesa® Adhesive Screws Triangle 5kg (77904) White board

This is how we do it:

tesa_77904_adhesive_screw_whiteboard_step_1of9_ap 01

Clean the surface for the screws thoroughly using a cloth with pure alcohol or water. Be sure to eliminate all dust and grease.

tesa_77904_adhesive_screw_whiteboard_step_2of9_ap 02

Measure out with the white board where to place the screws. Remove the protective film from the first screw.

tesa_77904_adhesive_screw_whiteboard_step_3of9_ap 03

Place the screw on the wall. With the initial low-grade adhesive, it will stay safely in place.

tesa_77904_adhesive_screw_whiteboard_step_4of9_ap 04

Now take the provided tube and fill adhesive into the larger hole. You can stop once the adhesive comes out the smaller hole. Repeat for the other screw.

tesa_77904_adhesive_screw_whiteboard_step_5of9_ap 05

Wait 12 hours for the adhesive to set. After that time, it will have reached its top strength.

tesa_77904_adhesive_screw_whiteboard_step_6of9_ap 06

Affix the white board to the screws. It will solidly hold for as long as you need it.

tesa_77904_adhesive_screw_whiteboard_step_7of9_ap 07

Now you can write your messages or notes on the board and wipe them off when they are no longer needed. With a magnetic board, you can even stick items such as doctor’s appointments to it.

tesa_77904_adhesive_screw_whiteboard_step_8of9_ap 08

It’s easy to take the board off again once it’s no longer required. Detach the white board itself. Twist each screw off sideways with pliers.

tesa_77904_adhesive_screw_whiteboard_step_9of9_ap 09

Use a scraper to remove any remaining adhesive. Not a trace will stay behind, leaving your wall just as it was before.

Tag » How To Hang A Whiteboard