Wood Veneer - Wikipedia

Thin slices of wood

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.Find sources: "Wood veneer" – news · newspapers · books · scholar · JSTOR (December 2012) (Learn how and when to remove this message)

Veneer refers to thin slices of wood and sometimes bark that typically are glued onto core panels (typically, wood, particle board or medium-density fiberboard) to produce flat panels such as doors, tops and panels for cabinets, parquet floors and parts of furniture. They are also used in marquetry. Unlike laminates, no two veneer sheets look the same. Plywood consists of three or more layers of veneer. Normally, each is glued with its grain at right angles to adjacent layers for strength. Veneer beading is a thin layer of decorative edging placed around objects, such as jewelry boxes. Veneer is also used to replace decorative papers in wood veneer high pressure laminate.

Background

[edit]

Veneering dates back to at least the ancient Egyptians who used expensive and rare wood veneers over cheaper timbers to produce their furniture and sarcophagi.[1] During the Roman Empire, Romans also used veneered work in mass quantities.[2]

Production

[edit]

Veneer is obtained either by "peeling" the trunk of a tree or by slicing large rectangular blocks of wood known as flitches. The appearance of the grain and figure in wood comes from slicing through the growth rings of a tree and depends upon the angle at which the wood is sliced. There are three main types of veneer-making equipment used commercially:

• A rotary lathe in which the wood is turned against a very sharp blade and peeled off in one continuous or semi-continuous roll. Rotary-cut veneer is mainly used for plywood, as the appearance is not desirable because the veneer is cut concentric to the growth rings.
• A slicing machine in which the flitch or piece of log is raised and lowered against the blade and slices of the log are made. This yields veneer that looks like sawn pieces of wood, cut across the growth rings; such veneer is referred to as "crown cut".
• A half-round lathe in which the log or piece of log can be turned and moved in such a way as to expose the most interesting parts of the grain, creating a more textured feel and appearance; such veneer is commonly referred to as "rift cut".

Each slicing process gives a very distinctive type of grain, depending upon the tree species. In any of the veneer-slicing methods, when the veneer is sliced, a distortion of the grain occurs. As it hits the wood, the knife blade creates a "loose" side where the cells have been opened up by the blade, and a "tight" side.

Veneers are cut as thin as 0.64 mm (1⁄40 in). Depending on the cutting process used by the veneer manufacturer, very little wood is wasted by the saw blade thickness, known as the saw kerf. Some manufacturers use a very wide knife to slice off the thin veneer pieces. In this process, none of the wood is wasted. The slices of veneer are always kept in the order in which they are cut from the log and are often sold this way.

Historically, veneers were also sawn in approximately 3 mm (1⁄8 in) thick layers.[3]

Veneer falls within the category of natural materials, hence it is called natural veneer.

Types of veneers

[edit]

There are a few types of veneers available, each serving a particular purpose.

• Raw veneer has no backing on it and can be used with either side facing up. The two sides will appear different when a finish has been applied due to the cell structure of the wood.
• Paper backed veneer is as the name suggests, veneers that are backed with paper. The advantage to this is it is available in large sizes, or sheets, as smaller pieces are joined prior to adding the backing. This is helpful for users that do not wish to join smaller pieces of raw veneers together. This is also helpful when veneering curves and columns as the veneer is less likely to crack.
• Phenolic backed veneer is less common and is used for composite, or artificial wood veneers. Due to concern for the natural resource, this is becoming more popular. It too has the advantage of being available in sheets, and is also less likely to crack when being used on curves.
• Laid up veneer is raw veneer that has been joined to make larger pieces. The process is time-consuming and requires great care, but is not difficult and requires no expensive tools or machinery. Veneers can be ordered through some companies already laid up to any size, shape or design.
• Reconstituted veneer is made from fast-growing tropical species. Raw veneer is cut from a log, and dyed if necessary. Once dyed, the sheets are laminated together to form a block. The block is then sliced so that the edges of the laminated veneer become the “grain” of the reconstituted veneer.
• Wood on Wood Also called 2-ply is a decorative wood veneer face with a utility grade wood backer applied at an opposing direction to the face veneer.[4]

See also

[edit]

• Bookmatching
• Engineered wood
• Formaldehyde
• Multilaminar veneer
• Plywood
• Sawdust
• Veneer hammer
• Wood glue
• Wood preservative

References

[edit]

1. ^ "What is a wood veneer?". www.wonkeedonkeexljoinery.co.uk. Retrieved 2016-06-21.
2. ^ MacDonald, Nancy (2013). Woodworking (2nd ed.). Cengage Learning. pp. 782–784. ISBN 978-1-285-70050-2. Retrieved 12 November 2015.
3. ^ DK Publishing (2010). Woodwork: A Step-by-Step Photographic Guide to Successful Woodworking. Penguin. p. 198. ISBN 978-0-7566-4306-5.
4. ^ "Glossary of Wood Veneer Terms". oakwoodveneer.com.

• Benson, Jonathan (2008). Woodworker's guide to veneering & inlay. East Petersburg, PA: Fox Chapel Pub. ISBN 9781565233461. OCLC 224443863.

External links

[edit] Look up wood veneer in Wiktionary, the free dictionary.

• European Panel Federation

v t e Wood products
Lumber/timber	Batten Beam Bressummer CLS Cruck Flitch beam Flooring Joist Lath Log building Log cabin Log house Molding Panelling Plank Plate Post Purlin Rafter Railroad ties Reclaimed Shingle Siding Sill Stud Timber truss Treenail Truss Utility pole
Engineeredwood	Cross-laminated timber Glued laminated timber veneer LVL parallel strand I-joist Fiberboard hardboard Masonite MDF Oriented strand board Oriented structural straw board Particle board Plywood Structural insulated panel Wood–plastic composite lumber
Fuelwood	Charcoal biochar Firelog Firewood Pellet fuel Wood fuel
Fibers	Cardboard Corrugated fiberboard Paper Paperboard Pulp Pulpwood Rayon
Derivatives	Birch-tar Cellulose nano Hemicellulose Cellulosic ethanol Dyes Lignin Liquid smoke Lye Methanol Pyroligneous acid Pine tar Pitch Sandalwood oil Tannin Wood gas
By-products	Barkdust Black liquor Ramial chipped wood Sawdust Tall oil Wood flour Wood wool Woodchips
Historical	Axe ties Bavin (wood) Billet (wood) Clapboard Dugout canoe Potash Sawdust brandy Split-rail fence Tanbark Timber framing Wooden masts
See also	Biomass Certified wood Destructive distillation Dry distillation Engineered bamboo Forestry Green building and wood List of woods Mulch Non-timber forest products Natural building Papermaking Reclaimed lumber Timber recycling Wood drying Wood preservation Wood processing Woodworking Yakisugi
Category Commons WikiProject Forestry

v t e Woodworking
Overviews	History Glossary Wood (lumber)
Styles	Boat building Bow and arrow Bush carpentry Cabinetry Caning Carpentry Certosina Chainsaw carving Chip carving Ébéniste Fretwork Intarsia Japanese carpentry Khatam Kohlrosing Log building Luthier Marquetry Millwork Pallet crafting Parquetry Pyrography Relief carving Root carving Segmented turning Shingle weaving Shipbuilding Spindle turning Timber framing Treen Whittling Wood carving Woodturning
Woods	Soft Cedar (Calocedrus, Cedrus) Cypress Douglas fir Fir Juniper Larch Kauri Pine Rimu Spruce Yew Hard Afromosia Alder Andiroba Anigre Ash Apple Aspen Avodire Balsa Beech Bilinga Birch African Blackwood Australian Blackwood Boxwood Bubinga Camphor Cedrela Cherry Chestnut Cocobolo Cumaru Ebony Elm Eucalyptus Hazel Hickory Hornbeam Idigbo Imbuia Ipê Iroko Jarrah Jelutong Lignum vitae Linden (lime, basswood) Lovoa Merbau Mahogany (American, African) Maple Meranti Oak Padauk Pear Plum Poplar Purpleheart Ovankol Ramin Red Quebracho Rosewood Rubberwood Sapele Teak Totara Utile Walnut Wenge Willow Zebrano Engineered Cross-laminated Glue laminated Hardboard MDF OSB Particle board Plywood Wood–plastic composite
Tools	Abrasives Axe Adze Burnisher Chisel Drawknife Drill Fence Float Gimlet Gauge Hinge bender Impact driver Janka hardness test Jointer Mallet Milling machine Mitre box Rasp Router Sandpaper Shaper Shaving horse Square (Carpenters, Combination, Miter, Speed, Try) Thickness planer Timber-framing Veneer hammer Vise Warrington hammer Winding sticks Wood scribe Workbench Clamps Band clamp C-clamp F-clamp Flooring clamp Gripe Holdfast Miter clamp Pipe clamp Sawbuck Saws Backsaw Bandsaw Bow Bucksaw Chainsaw Circular Compass Coping Crosscut Frame Fretsaw Hand saw Jigsaw Keyhole Miter Ripsaw Scroll Table Veneer Whipsaw Planes Bedrock plane Block plane Chamfer plane Compass plane Finger plane Fore plane Grooving plane Jack plane Japanese plane Jointer plane Moulding plane Razee plane Rebate plane Router plane Scrub plane Shoulder plane Smoothing plane Spokeshave Surform
Geometry	Joints Birdsmouth Biscuit Box Bridle Butt Butterfly Coping Crown of thorns Dado Dovetail Finger Groove Halved Hammer-headed tenon Knee Lap Mason's miter Miter Mortise and tenon Rabbet/Rebate Scarf Splice Tongue and groove Profiles Bead Bevel Chamfer Ogee Ogive Ovolo Surface piecing Binding Edge banding Intarsia Marquetry Oystering Parquetry Purfling
Treatments	Adhesive French polish Heat bending Lacquer Oil Paint Paint stripper Steam bending Thermal Varnish Wax Wood drying Wood preservation Wood stain Wood finishing
Organizations	American Association of Woodturners Architectural Woodwork Institute British Woodworking Federation Building and Wood Workers' International Caricature carving International Federation of Building and Wood Workers National Wood Carvers Association Society of Wood Engravers Timber Framers Guild
Conversion	Chainsaw mill Hewing Sawmill Whipsaw Wood splitting Flat sawing Quarter sawing Rift sawing
Techniques	Frame and panel Frameless construction Green woodworking
Category WikiProject Commons

Authority control databases
International	GND
National	United States France BnF data Czech Republic Israel
Other	Yale LUX