Z Axis Issues ( Solved ) - Troubleshooting - Maslow CNC Forums

Maybe your like

Troubleshooting Lloydinz May 18, 2018, 3:34am 1 Hi all, Well I’m finally cutting and creating dust. I had a big issue with my z axis doing weird and wonderfull things so I thought I would let you know my solution just in case someone is having the same issue. When I put power onto my spindle my z would plunge/ clime and the ground control buttons did nothing. Turns out the spindle cable was causing noise on the motor cable making z uncontrollable. I originally ran both cables parallel with each other to the sled but to solve the issue I now have my power cable running along the floor and it’s working fabulously. Happy cutting6 Likes csgrullon May 18, 2018, 3:47am 2 You could put some noise suppressor clips on the wires; that usually takes care of the interference. Jayster May 18, 2018, 4:29am 3

noise suppressor clips

Are you referring to ferrites? Where would you put them? On the router power cord? csgrullon May 18, 2018, 4:56am 4 Yes, on the power cord and also on the motor cable.That should take care of the problem.2 Likes jwolter May 18, 2018, 11:40am 5 Added this to the Troubleshooting Guide on the wiki. Thanks for reporting this! Keith May 18, 2018, 1:29pm 6 another option might be to put all the signal wires into a metal braided sleeve instead of the PET sleeve. Ground one end, and you should have a very effective shield.https://www.wirecare.com/category/braided-sleeving/metal-shielding/flexo-stainless-steel-xc/ssl0.25sv-flexo-ss-xc-high-coverage-stainless-steel-expandable-sleeving-1-4-10-ft-cutsNot sure what the flexibility is like, though.1 Like jjoseph1010 April 5, 2019, 1:17am 7 Hello it is brilliant!!, My Z axis seems to be working better now, had big problem when I told it to execute it started, but no carving at the start and gradually started to carve deeper to depth I wanted. thanks very much if this cures my z axis problem Related topics

Topic

Replies

Views

Activity

Interferrance from wraping Zaxis motor cable around router powercord? Electronics

1432

September 26, 2018

Z axis is completely off the rails, ridgid router jumps threads Troubleshooting

1265

October 7, 2021

Problem with z-axis wire Troubleshooting

582

August 7, 2018

Z-axis motor cable clip Routers/Spindles

545

November 30, 2018

Z-axis encoder connection diagnosis Troubleshooting

2218

October 1, 2021

Tag » Cnc 3018 Z Axis Problem

Z Axis Issues ( Solved ) - Troubleshooting - Maslow CNC Forums

CNC3018 Z-Axis Problem/Resilience Fixed - YouTube

Problem With GRBL Execution On Z-axis For CNC 3018Pro - Reddit

CNC 3018 Problems With Z-axis - Inventables Community Forum

Need Help! Z Axis Suddenly Goes Deeper While Machining - CNC Zone

Y And Z Axis Issues · Issue #997 · Gnea/grbl - GitHub

Troubleshooting For Common Issues With 3018-MX3 - SainSmart

Troubleshooting Inconsistent Z Axis Cut Depths On A CNC Router

Thread: 3018 Pro 3 Axis Mini DIY CNC Router Problem - MYCNCUK

Hello, I Have A Strange Problem With CNC 3018 Pro - Facebook

CNC 3018 Pro Z Axis Coupler Adjustment - One Transistor

3018-PRO CNC Extended Z-axis 80mm Stroke 775 Or 52mm - Etsy

UPGRADE Z-AXIS CNC 3018 To Improve Stability At Low Cost

ANNOY TOOLS CNC Z-axis Module Support 3018pro, Spindle ...

Cnc 3018 Z Axis Upgrade 3d Models - STLFinder

Contact