10 Important Difference Between CT And PT (VT)

Skip to content

Current transformers (CT) and Potential Transformers (PT) are instrument transformer types used to step down transmission or distribution line voltages and current to the level that can be measured using measurement devices or controlled using control devices. The principle of operation of a certain type of CT and PT is similar to power transformers. Here are the basic difference between CT and PT. Potential transformers are also known as Voltage transformers in some countries.

Difference between Current transformer and Potential transformer / Voltage transformer

Below are the differences between current transformers and potential transformers:

Property	Current transformer	Potential transformer/Voltage transformer
Purpose	Transforms high current to low, measurable value. Read more	Steps down high voltage to low, measurable value. Read more
Windings	Primary: Typically Single turn.Secondary: A large number of turns.	Primary: A large number of turns.Secondary: Fewer turns.
Winding thickness	Primary: Heavy conductor capable of carrying high currents.Secondary: Thin conductor capable of carrying 5A-20A.	Primary: Thin conductor.Secondary: Thick conductor.
Flux Density	Low	High
PrimaryConnection	Connected in series to the ammeter or other instruments.	The primary of a potential transformer is connected across the conductor and earth.
SecondaryConnection	Connected in series to the ammeter or other instruments.	Connected across the voltmeter or other instruments.
Secondary rating	The secondary rated current can be either 1A or 5A	The secondary rated voltage can be 100/√3 – 120/√3 or 100/3 – 120/3 V
Primary Impedance	High	Low
Symbols
Types	1. Window CT or toroidal CT2. Bar CT3. Wound CT	1. Electromagnetic induction type2. Capacitive-coupled type3. Optical type
SafetyConsideration	The secondary terminals of a current transformer must never be open-circuited.	The secondary terminals of a voltage transformer must never be short-circuited.

Connection: Current transformer vs Potential transformer

Connection difference between CT and PT

The connection difference between CT and PT can be understood from the below diagram. It can be noted that the current transformer is connected in series to the load whereas the potential transformer or voltage transformer is connected across the load. Also, the measurement devices is connected in series to the CT-secondary whereas they are connected in parallel to the PT-secondary.

This Post Has One Comment

1. Rajesh October 19, 2021 Reply

   nice post

Leave a Reply Cancel reply

CommentEnter your name or username to commentEnter your email address to commentEnter your website URL (optional)

Search for content

Related content

• How rating of a circuit breaker for a system is determined?
• Transformer – Operation, construction and types
• High Leg delta connection
• Transformer core
• EMF equation of transformers
• Which is the most efficient electrical machine?
• Ideal Transformer
• Insulation materials used in transformers
• Difference between NPN and PNP transistors | NPN vs PNP Transistor
• Electric Short Circuit

Search for content

Related content

• How rating of a circuit breaker for a system is determined?
• Transformer – Operation, construction and types
• High Leg delta connection
• Transformer core
• EMF equation of transformers
• Which is the most efficient electrical machine?
• Ideal Transformer
• Insulation materials used in transformers
• Difference between NPN and PNP transistors | NPN vs PNP Transistor
• Electric Short Circuit