2) Mr. A Desired To Synthesize C2H6(g) From CH4(g)

Trang chủ » Mr C2h6 O2 » 2) Mr. A Desired To Synthesize C2H6(g) From CH4(g)

Có thể bạn quan tâm

Skip to main contentPasteCopyCutOptionsUpload ImageMath Mode÷≤≥oπ∞∩∪√∫Math
  • Math
  • Geometry
  • Physics
  • Greek Alphabet
  1. Engineering
  2. Chemical Engineering
  3. Chemical Engineering questions and answers
  4. 2) Mr. A desired to synthesize C2H6(g) from CH4(g) and O2(g) by using Ce 5wt% supported on Al2O3 . He set up a system for running the reaction as follows. The inlet gas system consisted of 20%vol CH4(g) and 80%vol O2. The total feed gas of the inlet was 50 mL/min. The amount of catalyst used was 0.5 g which was equal to 1 mL in volume of the catalyst. The
  • Chegg LogoThis question hasn't been solved yet!Not what you’re looking for?Submit your question to a subject-matter expert.Send to expertPrevious question Next questionTranscribed image text: 2) Mr. A desired to synthesize C2H6(g) from CH4(g) and O2(g) by using Ce 5wt% supported on Al2O3 . He set up a system for running the reaction as follows. The inlet gas system consisted of 20%vol CH4(g) and 80%vol O2. The total feed gas of the inlet was 50 mL/min. The amount of catalyst used was 0.5 g which was equal to 1 mL in volume of the catalyst. The products detected at outlet were 0.4%vol C2H6, 0.8%vol C2H4, 0.2%vol C3H6, and 0.3%vol C3Hg. The life time of the catalyst was 30 days. Mr. A also took the catalyst to measure the number of active site by measuring the amount of CO2 adsorbed on the surface of the catalyst (CO2-TPD technique). He found that the amount of CO2 desorbed was 2,000 mmol/g.cat. Determine the following values: • CH4 conversion Selectivity of C2H6 product Rate of the reaction Space velocity Space time yield of C2H6 product Turnover frequency of C2H6 product Turnover number of C2H6 product • • Note: Make any assumption if required.
Transcribed image text: 2) Mr. A desired to synthesize C2H6(g) from CH4(g) and O2(g) by using Ce 5wt% supported on Al2O3 . He set up a system for running the reaction as follows. The inlet gas system consisted of 20%vol CH4(g) and 80%vol O2. The total feed gas of the inlet was 50 mL/min. The amount of catalyst used was 0.5 g which was equal to 1 mL in volume of the catalyst. The products detected at outlet were 0.4%vol C2H6, 0.8%vol C2H4, 0.2%vol C3H6, and 0.3%vol C3Hg. The life time of the catalyst was 30 days. Mr. A also took the catalyst to measure the number of active site by measuring the amount of CO2 adsorbed on the surface of the catalyst (CO2-TPD technique). He found that the amount of CO2 desorbed was 2,000 mmol/g.cat. Determine the following values: • CH4 conversion Selectivity of C2H6 product Rate of the reaction Space velocity Space time yield of C2H6 product Turnover frequency of C2H6 product Turnover number of C2H6 product • • Note: Make any assumption if required.

Từ khóa » Mr C2h6 O2