601(15) Provision And Display Of Manoeuvring Information On Board ...

Ga direct naarInhoudofMenu

Human Environment and Transport Inspectorate - Ministry of Infrastructure and the Environment Netherlands Regulatory Framework (NeRF) – Maritime Zoeken op tekst Zoekterm Zoeken uitgebreid zoeken Hoofdnavigatie

• Home
• Advanced search
• Tree view
• Type of document
• Subjects

• Alle hoofdtaken
• Koopvaardij / Merchant Shipping
• Visserij / Fishery

Onderwerp: HomeZoekresultaten Bezoek-historie 601(15) Provision and display of manoeuvring information on board ships

Geldigheid:

19-11-1987 t/m

Status: Geldig vandaag

Dit onderwerp bevat de volgende rubrieken.

• Document
• Documentgegevens
• Versies

Externe relaties

Onderstaande relaties zijn gevonden bij “document”. Bij klikken wordt een externe website met een relatieoverzicht geopend op overheid.nl.

A./Res. 600 until 699  v

Themastructuur^

Zeevaart / Seagoing shipsPolicy RulesIMO Instruments (Policy Rules)Resolutions (Policy Rules)Assembly Resolutions (Policy Rules)A./Res. 600 until 699

Maak een PDF

THE ASSEMBLY,RECALLING Article 15(j) of the Convention on the International Maritime Organization concerning the functions of the Assembly in relation to regulations and guidelines concerning maritime safety, RECALLING ALSO that it adopted by resolution A.209(VII) the Recommendation on Information to be included in the Manoeuvring Booklets in order to ensure uniformity of such information on board ship, NOTING the importance attached to further enhancement of the safety of navigation, RECOGNIZING the need to achieve a uniform format and content of the pilot card and the wheelhouse poster, and to establish a framework for the manoeuvring booklet which provides navigators with more detailed information on the manoeuvring characteristics of the ship, HAVING CONSIDERED the recommendation made by the Maritime Safety Committee at its fifty-third session : 1. ADOPTS the Recommendation on the Provision and the Display of Manoeuvring, Information on Board Ships, as set out in the Annex to the present resolution, which supersedes the Recommendation adopted by resolution A.209(VII); 2. INVITES all Governments concerned to take steps to give effect to the Recommendation as soon as possible; 3. REQUESTS the Maritime Safety Committee to keep the Recommendation under review for the purpose of improvement based on new developments in techniques and in the light of experience gained in its application. Permanente link

Annex Recommendation on the provision and the display of manoeuvring information on board ships

1 Introduction

1.1 In pursuance of the Recommendation on Data Concerning Manoeuvring Capabilities and Stopping Distances of Ships, adopted by resolution A.160(ES.IV), and paragraph 10 of regulation II/1 of the International Convention on Standards of Training, Certification an, Watchkeeping for Seafarers, 1978, Administrations are recommended to require that the manoeuvring information given herewith is on board and available to navigators. 1.2 The manoeuvring information should be presented as follows: .1 Pilot card .2 Wheelhouse poster .3 Manoeuvring booklet Permanente link

2 Application

2.1 The Administration should recommend that manoeuvring information, in the form of the models contained in the appendices, should be provided as follows:

1. for all new ships to which the requirements of the 1974 SOLAS Convention, as amended, apply, the pilot card should be provided;
2. for all new ships of 100 metres in length and over, and all new chemical tankers and gas carriers regardless of size, the pilot card, wheelhouse poster and manoeuvring booklet should be provided.

2.2 The Administration should encourage the provision of manoeuvring information or existing ships, and ships that may pose a hazard due to unusual dimensions or characteristics 2.3 The manoeuvring information should be amended after modification or conversion o the ship which may alter its manoeuvring characteristics or extreme dimensions. Permanente link

3 Manoeuvring information

3.1 Pilot card (appendix 1)The pilot card, to be filled in by the master, is intended to provide information to the pilot on boarding the ship. This information should describe the current condition of the ship, with regard to its loading, propulsion and manoeuvring equipment, and other relevant equipment. The contents of the pilot card are available for use without the necessity of conducting special manoeuvring trials. 3.2 Wheelhouse poster (appendix 2)The wheelhouse poster should be permanently displayed in the wheelhouse. It should contain general particulars and detailed information describing the manoeuvring characteristics of the ship, and be of such a size to ensure ease of use. The manoeuvring performance of the ship may differ from that shown on the poster due to environmental, hull and loading conditions. 3.3 Manoeuvring booklet (appendix 3)The manoeuvring booklet should be available on board and should contain comprehensive details of the ship's manoeuvring characteristics and older relevant data. The manoeuvring booklet should include the information shown on the wheelhouse poster together with other available manoeuvring information. Most of the manoeuvring information in the booklet can be estimated but some should be obtained from trials. The information in the booklet may be supplemented in the course of the ship's life. Permanente link

Appendix 1

 

 

Permanente link

Appendix 2

 

Appendix 2 (continued) 

Appendix 2 (continued)

Permanente link

Appendix 3 Recommended information to be included in the manoeuvring booklet

1 General description

1.1 Ship's particulars1.1.1 General Ship's name, distinctive number or letters, year of build 1.1.2 Gross tonnage and other information Gross tonnage, deadweight and displacement (at summer draught) 1.1.3 Principal dimensions and coefficients Length overall, length between perpendiculars, breadth (moulded), depth (moulded) summer draught, normal ballast draught, hull coefficients at summer load and normal ballast condition Extreme height of the ship's structure above the keel 1.1.4 Main engine Type, number of units and power output 1.1.5 Propeller Type, number of units, diameter, pitch, direction of rotation , propeller immersion 1.1.6 Rudder Type, number of units, total rudder area, rudder area ratio (full load and normal ba11ast) 1.1.7 Bow and stern thrusters Type, number of units, capacities and location 1.1.8 Bow and stern profiles 1.1.9 Forward and after blind zones with dimensions specified (full load and normal ballast) 1.1.10 Other hull particulars Projected areas of longitudinal and lateral above-water profiles (full load and normal ballast ) Length of parallel middle body for berthing (full load and normal ballast) 1.2 Characteristics of main engine1.2.1 Manoeuvring speed tables (trial or estimated, at the full load and ballast conditions) Engine revolutions, ship speed and thrust (at ahead) corresponding to engine orders 1.2.2 Critical revolutions 1.2.3 Time for effecting changes in engine telegraph settings as in 3.1.2 for both routine and emergency conditions 1.2.4 Time limit astern 1.2.5 Minimum operating revolutions (for diesel engines) and corresponding ship speed 1.2.6 Maximum number of consecutive starts (for diesel engines) Permanente link

2 Manoeuvring characterisics in deep water

2.1 Course change performance2.1.1 Initial turning test results (trial or estimated, at the full load and ballast conditions), test conditions, diagrams of heading angle versus time and ship's track 2.1.2 Course change test results (trial or estimated, at full load and ballast conditions) Curves of course change distance and point of initiation of counter rudder for the necessary course change angle (for both full load and ballast conditions) 2.2 Turning circles in deep water (trial or estimated, at the full load and ballast conditions)2.2.1 Turning circle test results Test conditions, test results (advance and transfer) and turning track at full sea speed ahead 2.2.1.1 Turning circles in both full load and ballast conditions (stern track should be shown) 2.2.1.2 The data presented should refer to the case of starboard turn only (unless there is significant difference for port turn) 2.2.1.3 The initial speed of the ship should be pull sea speed ahead 2.2.1.4 Times and speeds at 90 , 180 , 270 and 360 turning should be specifically shown together with an outline of the ship 2.2.1.5 The rudder angle used In the test should be the maximum rudder angle 2.3 Accelerating turn (trial or estimated)2.3.1 Data are to be presented for both full load and ballast conditions in the same manner as 2.2 for turning circles. The ship accelerates from rest with the engine manoeuvring speed ahead and the maximum rudder angle 2.4 Yaw checking tests (trial or estimated)2.4.1 Results of the zig-zag and pull-out manoeuvre tests at the full load or ballast condition shown as diagrams of the heading changes and rudder angle 2.5 Man-overboard and parallel course manoeuvres2.5.1 Man-overboard manoeuvre (trial) Diagrams for cases of both starboard and port turns should be shown for both full load and ballast Conditions 2.5.2 Parallel course manoeuvre (estimated) Diagrams showing lateral shift to a parallel course using maximum rudder angle 2.6 Lateral thruster capabilities (trial or estimated)2.6.1 Diagrams of turning performance at zero forward speed in the full load or ballast condition should be shown, for bow and stern thrusters acting separately and combination 2.6.2 Diagrams showing the effect of forward speed on turning performance should be included 2.6.3 Information on the effect of wind on turning performance should be given Permanente link

3 Stopping and speed control characteristics in deep water

3.1 Stopping ability3.1.1 Slopping test results (trial) Test conditions, ship's tracks, rpm, speed, track reach, head reach and side reach Two or more tests should be carried out including a test of full astern from full sea speed ahead and a test of full astern from full ahead speed 3.1.2 Stopping ability (estimated) Information and diagrams should be given of the track reach, head reach, side reach, time required and track reach deceleration factor (distance/one knot reduction) of a ship in both full load and ballast conditions covering the following modes of stopping manoeuvres: full astern from full sea speed ahead full astern from full ahead speed full astern from half ahead speed full astern from slow ahead Speed stop engine from full sea speed ahead stop engine from full ahead speed stop engine from half ahead speed stop engine from slow ahead speed 3.2 Deceleration performance (estimated)3.2.1 Deceleration ability (estimated) Information and diagrams should be given concerning the track reach, time required and deceleration factor of the ship in both full load and ballast conditions for the following engine orders: full sea speed to "stand by engines" full ahead to half ahead half ahead to slow ahead slow ahead to dead slow ahead 3.3 Acceleration performance (estimated)3.3.1 Information and diagrams should be given for track reach and time for the ship to achieve full sea speed ahead, from zero speed Permanente link

4 Manoeuvring characteristics in swallow water

4.1 Turning circle in shallow water (estimated)4.1.1 Turning circle in the full load condition (stem track to be shown) 4.1.2 The initial speed of the ship should be half ahead 4.1.3 Times and speeds at 90°, 180°, 270° and 36° turning should be specifically shown, together with an outline of the ship 4.1.4 The rudder angle should be the maximum and the water depth to draught ratio should be 1.2 4.2 Squat (estimated)4.2.1 Curves should be drawn for shallow water and infinite width of channel, indicate the maximum squat versus ship speed for various water depth/draught ratio 4.2.2 Curves should be drawn for shallow and confined water, indicating the maximum squat versus speed for different blockage factors Permanente link

5 Manoeuvring characteristics in wind

5.1 Wind forces and moments (estimated)5.1.1 Information should be given on the wind forces and moments acting on the ship for different relative wind speeds and directions in both full load and ballast conditions, to assist in berthing 5.2 Course-keeping limitation (estimated)5.2.1 Information should be given for both full load and ballast conditions, showing the effect of wind on the ability of the ship to maintain course 5.3 Drifting under wind influence (estimated)5.3.1 Information should be given on the drifting behaviour under wind influence with no engine power available Permanente link

6 Manoeuvring characteristics at low speed (trial or estimated)

6.1 Information on the minimum operating revolutions of the main engine and corresponding ship's speed should be given 6.2 Information on the minimum speed at which the ship can maintain course while still making headway after stopping engines Permanente link

7 Additional information

7.1 Any other relevant additional Information should be added to the contents of the booklet, particularly information concerned with the operation of the bridge manoeuvring controls. Permanente linkPermanente linkPermanente link

Bijlagen

Beschrijving

601(15) Provision and display of manoeuvring information on board ships

Informatietype en toegang

InformatietypeInternationaalDocumentsoortResolutieToegangsrechtenExtern

Identificatie, datum en versie

IdentificatiePUC_2105_14Versie1Datum beschikbaarheid19-10-2009 Geldigheid van 19-11-1987 tot en met   Wijzigingsdatum24-11-2016

Herkomst en taal

Titel601(15) Provision and display of manoeuvring information on board shipsOrganisatieInternational Maritime Organization (IMO)TaalNederlandsOnderwerpVeiligheid / Safety

Kenmerken

HoofdtaakKoopvaardij / Merchant ShippingThemaZeevaart / Seagoing ships / Policy Rules / IMO Instruments (Policy Rules) / Resolutions (Policy Rules) / Assembly Resolutions (Policy Rules) / A./Res. 600 until 699

Permanente link

Huidige versie Meest recente versie

Versie informatie document

Publicatie op Netherlands Regulatory Framework (NeRF) – Maritime: Huidige versie: 1 Datum beschikbaarheid huidige versie: 19-10-2009 (vanaf dit moment beschikbaar op Netherlands Regulatory Framework (NeRF) – Maritime) Datum document:

Versie	Geldigheidsdatum	Status
1 [versie op het scherm]	vanaf 19-11-1987	Geldig vandaag

Relaties

0 relaties gevonden bij document

Relaties

0 relaties gevonden bij document

Inhoudsopgave

Alles dichtklappenAlles openklappen

• in/uitklappenAnnex Recommendation on the provision and the display of manoeuvring information on board ships
  • 1 Introduction
  • 2 Application
  • 3 Manoeuvring information
  • Appendix 1
  • Appendix 2
  • in/uitklappenAppendix 3 Recommended information to be included in the manoeuvring booklet
    • 1 General description
    • 2 Manoeuvring characterisics in deep water
    • 3 Stopping and speed control characteristics in deep water
    • 4 Manoeuvring characteristics in swallow water
    • 5 Manoeuvring characteristics in wind
    • 6 Manoeuvring characteristics at low speed (trial or estimated)
    • 7 Additional information

Naar boven

Overzicht van meest recent bekeken documenten

Versievergelijk

Huidige versie: 1

Waarschuwing

In ieder geval één van de gekozen bestanden is een geupload document. Daar kan niet mee worden vergeleken. Service

NeRF - Maritime is maintained by the Netherlands Shipping Inspectorate as a service to the Maritime Industry.

If questions are raised regarding the content, the original version of the regulatory framework as published through the official channels prevails.

Subscribe

If you would like to receive updates on all changes (daily e-mail, if any changes) to the regulatory framework, click here followed by clicking on 'Abonneer mij op dit zoekresultaat' (right upper corner).

NLflag

Interested in flying the Dutch flag? Visit: https://nlflag.nl/  

Contact NSI

If you have any questions, you may contact NSI via +31(0)-88 489 0000 or the Contact form