After Map Update Navigation Stuck "navigation Starting Up"

Có thể bạn quan tâm

SwedeSpeed - Volvo Performance Forum banner

Menu Log in Sign up

Home
Forums
FWD & AWD Volvos
XC60 (2010 - 2017)

Am02857 A Hi all, I have recently bought a late 2014 xc60 (d4, awd, ocean race). I wanted to update the european map. I followed the procedure (format usb fat32, 32gb, downloaded directly to usb, verified download). When i put the usb in car, it showed the notification on map update. Pressed OK and it started to update. As i have read around that it is not a problem to switch off the car as the update will resume once the car is turned on after 30-40 min driving, i stopped. When I turned on the car again, the update didnt resume and the navigator is stuck at "navigation starting up". It doesnt take any command or anything. I downloaded the maps once again on another usb stick and when I plug it it, it shows a notification "maps are updated" pres exit to close but still navigation wont start. I tried to reset through the menu to factory setting but nothing changed. I disconnected last night the negative wire from the battery but still have the same issue (nothing has been reset). Do you guys have any idea how I can get it back working (without going at a dealer 😁)? 131615

#1 · Aug 6, 2021 (Edited) Hi all, I have recently bought a late 2014 xc60 (d4, awd, ocean race). I wanted to update the european map. I followed the procedure (format usb fat32, 32gb, downloaded directly to usb, verified download). When i put the usb in car, it showed the notification on map update. Pressed OK and it started to update. As i have read around that it is not a problem to switch off the car as the update will resume once the car is turned on after 30-40 min driving, i stopped. When I turned on the car again, the update didnt resume and the navigator is stuck at "navigation starting up". It doesnt take any command or anything. I downloaded the maps once again on another usb stick and when I plug it it, it shows a notification "maps are updated" pres exit to close but still navigation wont start. I tried to reset through the menu to factory setting but nothing changed. I disconnected last night the negative wire from the battery but still have the same issue (nothing has been reset). Do you guys have any idea how I can get it back working (without going at a dealer 😁)? 131615

See less See more Preview image for a collapsed post.

1 Sort by Oldest first Oldest first Newest first Most reactions #2 · Feb 21, 2022 come on guys. anyone had the same issue? Any ideas on how to fix this? #3 · Feb 21, 2022 You could try hard resetting the vehicle by touching the negative cable to the positive terminal for about 60 seconds. If that does not work you are going to need professional intervention. #4 · Mar 16, 2022 already tried and nothing could be done

0 Reply #5 · Mar 17, 2022 Can you purchase a few days of VIDA to do a complete re-download of the ICM's software? It's probably just cheaper to go to the dealer if you don't already have a DiCE and since D5T5 doesn't have a cheap alternative solution. #7 · Apr 5, 2022 i am willing to purchase a few days of VIDA but i don't know why I can't access the site. can a cloned dice be used? 0 Reply #6 · Apr 4, 2022 I have a 18 V60 and this exact same problem after trying to update the maps. Is there a fix for this issue ? #8 · Apr 5, 2022 i h i yet haven't been able to do something like that. waiting for the next update by the end of this month. 0 Reply #9 · May 1, 2022 Update on Navigation stuck starting up. As I mentioned before 18 Volvo V60 update failed when I was installing map update: 32319163 which was released in May 2021. I could not get the update to restart - it kept stating "maps already loaded" Today I downloaded: 32319164 which was released in April 2022 and it installed sucessfully after one failure. Follow these instructions verbatim: Download the Latest Maps - after you put the usb in the car and start the updates, never ever remove that USB - even if it says it failed, once you hit "exit" it will pick back up where it left off and finish. Mine took about 1.5 hours - i left the car running and baby sat it the whole time, but it did work. Everything seems fine with the nav now- except the RSI isnt working and I havent figure that out yet, I don't have and RSI setting in MY VOLVO to check or uncheck and not sure if there was one before or not. Its my understanding that those SENSUS Nav's in the 2015 thru 2018 models do the RSI from within navigation but I found no settings of any kind to turn it back on. #10 · May 10, 2022 latest map update solved the problem

#11 · May 12, 2022 I directly replace Ihu hardware for this problem. I don't know whether I can start ICM engineering mode through vdash or not. Insert Quotes Post Reply

posts 4.2M members 203K Since 2000 A forum community dedicated to Volvo owners and enthusiasts. Come join the discussion about performance, builds, modifications, classifieds, troubleshooting, maintenance, new releases, and more! Show Less Full Forum Listing Explore Our Forums R Forum (2004-2007) S40 & V50 (2005-2012) XC90 (SPA: 2016 - ) S60, S60CC & V60, V60CC (2011-2018) XC90 (2003 - 2014)