Aqueous Carbonation Of MgSO4 With (NH4)2CO3 For CO2 ...
Advanced search - Economic literature: papers, articles, software, chapters, books.
- Authors
- Institutions
- Rankings
- Help/FAQ
- MyIDEAS
- More options at page bottom
Browse Econ Literature
- Working papers
- Journals
- Software components
- Books
- Book chapters
- JEL classification
More features
- Subscribe to new research
- RePEc Biblio
- Author registration
- Economics Virtual Seminar Calendar
- ConfWatcher NEW!
Printed from https://ideas.repec.org/a/wly/greenh/v9y2019i2p209-225.html - Author & abstract
- Download
- Related works & more
- Corrections
Author
Listed: Registered:Abstract
Mineral carbonation is an important technical option for the effective reduction of CO2 emissions. Natural magnesium‐containing minerals, such as serpentine and blast furnace slag (BFS), have recently been used for CO2 storage with an indirect carbonation route using ammonium sulfate. In this study, the effects of the feeding mode and process parameters on the magnesium conversion, product phase, and morphology during the aqueous carbonation of MgSO4 with ammonium carbonate solution were investigated in detail. The results showed that the carbonation ratio with a parallel feed was higher than the forward and reverse feed by about 3–5% with a limited reaction time, and the product size was more uniform. The phase and morphology of the products were affected significantly by the temperature. The highest carbonation ratio appeared at 40°C because only 75% of magnesium was carbonated if hydromagnesite was produced. When the mole ratio of (NH4)2CO3 to MgSO4 was 2:1 and the concentration of magnesium sulfate was higher than 0.4 mol·L−1, the carbonated products contain ammonium magnesium carbonate, and the ammonia should be recovered by selective thermal decomposition. When the mole ratio decreased to 1.5:1, only nesquehonite appears with high crystallinity and uniform size. The optimized conditions were therefore selected as 40°C, a mole ratio of 1.5:1, and magnesium sulfate concentration of 0.7 mol·L−1. Under these conditions the carbonation ratio reached 88%. Additionally, the optimal initial pH of MgSO4 solution was 9.5 (the product was nesquehonite at low pH) while the hydromagnesite will be produced at higher pH (pH more than 10). © 2019 Society of Chemical Industry and John Wiley & Sons, Ltd.Suggested Citation
Download full text from publisher
File URL: https://doi.org/10.1002/ghg.1840Download Restriction: no File URL: https://libkey.io/10.1002/ghg.1840?utm_source=ideas LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item --->Từ khóa » (nh4)2hco3
-
Ammonium Carbonate | (NH4)2CO3 - PubChem
-
Effective Identification Of (NH4)2CO3 And NH4HCO3 Concentrations ...
-
(nh4)2co3 - Sigma-Aldrich
-
(nh4)2co3 - Sigma-Aldrich
-
Ammonium Carbonate (NH4)2CO3 – Detectors & Protection ... - Dräger
-
Molar Mass / Molecular Weight Of (NH4)2CO3: Ammonium Carbonate
-
How To Write The Formula For Ammonium Carbonate - YouTube
-
Quali-Tech Chem Ammonium Carbonate (50 Gm), [(NH4)2CO3], CAS
-
Primary Amination Of Ar2P(O)–H With (NH4)2CO3 As An Ammonia ...
-
Interaction Between (NH4)2CO3 With CMC Through NH4 Group
-
(NH4)2HCO3 + O2 = NH3 + CO2 + H2O - Chemical Equation Balancer
-
Ammonium Carbonate - The NIST WebBook
-
About: Ammonium Carbonate - DBpedia