Asus H110M-K Instruction Manual (Page 11 Of 25) - ManualsLib

Có thể bạn quan tâm

× Bookmark added × Added to my manuals

Manuals
Brands
Asus Manuals
Motherboard
H110M-K
Instruction manual

Asus H110M-K Instruction Manual page 11 Hide thumbs 1 2 Table Of Contents 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

page of 25 Go / 25
Contents
Table of Contents
Bookmarks

Table of Contents Intel H110 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~4) ® These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI]. USB 3.0 connectors (20-1 pin USB3_12) Connect a USB 3.0 module to any of these connectors for additional USB 3.0 front or rear panel ports. These connectors comply with USB 3.0 specifications and provide faster data transfer speeds of up to 5 Gbps, faster charging time for USB- chargeable devices, optimized power efficiency, and backward compatibility with USB 2.0. Clear RTC RAM (2-pin CLRTC) This header allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Use a metal object such as a screwdriver to short the two pins. 3. Plug the power cord and turn ON the computer. 4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data. USB 2.0 connectors (10-1 pin USB1112, USB1314) Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specifications and supports up to 480Mbps connection speed. Digital audio connector (4-1 pin SPDIF_OUT) Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. TPM connector (14-1 pin TPM) Connect a Trusted Platform Module (TPM) system to this connector to enhance network security, protect digital identities, and ensure platform integrity. PIN 1 SPDIF_OUT ASUS H110M-K If the steps above do not help, remove the onboard battery and short the two pins again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery. TPM +3VSB F_CLKRUN S_PCIRST#_TBD F_SERIRQ F_FRAME# GND F_LAD3 C_PCICLK_TPM F_LAD2 F_LAD1 +3V +3V F_LAD0 PIN 1 CLRTC PIN 1 1-3 Table of Contents Previous Page Next Page

Show Quick Links