B&M 40295 CAST DEEP PAN User Manual | 2 Pages

Installation Instructions

E4OD/4R100/5R100

(including most Ford Trucks- Gasoline/Diesel/2WD/4WD)

Deep Oil Pan

Part Number 40290, 40295

©2014, 2008, 2006, 2004, 1998 by B&M Racing and Performance Products

(see www.bmracing.com for the latest vehicle fitment applications and model years)

Congratulations! You have just pur-chased one of the finest cast alumi-num pans available for the Ford E4OD/4R100 Transmission. The B&M E4OD/4R100/5R100 TORQUE-SHIFT CastAluminum Deep Oil Pan has beendesigned to work on most 1989 andnewer Ford trucks with the E4OD/4R100 transmission. The B&M E4OD/4R100/5R100 TORQUE-SHIFT CastAluminum Deep Oil Pan providesseveral advantages over stock factoryoil pans. The extra capacity providesincreased oil volume and added cool-ing, while the aluminum constructionincreases case rigidity. The drain plugfeature allows regular transmissionmaintenance and oil changes withoutthe usual mess associated with “drop-ping the pan.”

This B&M E4OD/4R100/5R100TORQUE-SHIFT Cast AluminumDeep Oil Pan can be installed by any-one with minimum mechanical expe-rience. It is however, important toclosely follow the instructions.We recommend that you read throughthe instructions completely before be-ginning the installation, so you can fa-miliarize yourself with the installation

procedure. Check the tool list at theend of these instructions for the toolsrequired to install your B&M E4OD/4R100/5R100 TORQUE-SHIFT CastAluminum Deep Oil Pan.When installing your Deep Oil Panthere are several other B&M productsyou may wish to consider:

TRANSMISSION OIL COOLER: Wefeel that it is very important that everyvehicle should have a transmission oilcooler in addition to the radiator heatexchanger. Heat is the major cause oftransmission failures, and an oil cooleris an inexpensive safeguard againstoverheating. B&M offers a wide rangeof transmission coolers to suit everyneed, which are available at your B&Mdealer.

TRICK SHIFT PERFORMANCE ATF:Trick Shift performance automatictransmission fluid is the industry’sleading performance ATF. A speciallyblended oil with foam inhibitors, ex-treme pressure agents and shift im-provers, this fluid assures protectionwhile delivering the fastest possibleshifts. You literally “Pour in perfor-mance.” Available at your B&M dealer.

INTRODUCTION

This Deep Oil Pan can be installed inabout an hour by carefully following theinstructions. Transmission compo-nents are precision fit and dirt is thenumber one enemy of an automatictransmission. Cleanliness is very im-portant, so a clean work surface fromwhich oil can easily be removed isnecessary.

Caution: Automatic transmissions op-erate at temperatures between 150°Fand 250°F. It is suggested that thevehicle be allowed to cool off for a fewhours to avoid burns from hot oil andparts. The vehicle should be off theground for ease of installation - jackstands, wheel ramps or a hoist willwork fine.MAKE SURE VEHICLE IS FIRMLYSUPPORTED - DO NOT WORK UN-DER A VEHICLE IF IT IS SUP-PORTED BY ONLY A JACK! Note:4WD models may not need to belefted to install pan. Try to raise thevehicle 1-2 feet so you will have plentyof room to work. Also, have a smallbox to put bolts in and a drain pan tocatch oil.

Printed in the USA 9500673-05